n96 one sim double slider - GSM-Forum

kasra · 11-25-2008, 16:48

hi guys
n96 one sim double slider can socket is 5pin like nokia 5610 5310 anyone can help me find pinout??

InfinityHelp · 11-25-2008, 19:28

hello!

in most cases pinout is not in system connector.
i would advice to examinate handsfree port or look for test points on PCB.
i can teach how to do this by multimeter (voltage measuring)

kasra · 11-26-2008, 08:03

i must read the manual of find pinout with voltage measuring? or other solution?

InfinityHelp · 11-26-2008, 19:05

hello!

1. set multimeter to voltage measuring.
2. check bettery voltage, it should be more than 3,7volts
3. set one multimeter probe to some grounded phone part
(if you cant find grounded part outside phone- you need to take out small thin wire from negative battery terminal)
4. with second probe touch one by one all phone pins (phone battery attached)
(to get better result i would advice to set needle on the end of second probe)

memorise pins with voltage between 2,7-2,9volts.
those are tx/rx

kasra · 11-26-2008, 19:46

thanx for ure help i found the pinouts and i will get a image and upload it for other guys really thanx!!

InfinityHelp · 11-26-2008, 21:05

hello!

we will wait your pinout picture for adding to our pinout collection.
Thank you in advance!

kasra · 11-27-2008, 07:45

here is the pinouttttttttttttttttttttttttt

InfinityHelp · 11-27-2008, 19:51

hello!

thank you very much! will be inculeded to out collection

lader · 12-28-2008, 14:06

this another model for n96

ok rx tx in left or rigt ok

InfinityHelp · 12-29-2008, 01:43

Quote:

Originally Posted by lader

this another model for n96

ok rx tx in left or rigt ok

hello!

thank you very much for your help!!!

aco · 02-02-2009, 16:00

Somebody have pinout for this ver.??

usernome · 04-01-2009, 13:44

Did anyone find the pinout ?

Thanx !

usernome · 04-01-2009, 15:15

I removed the processor but I don't know which are Rx and Tx .

usernome · 04-01-2009, 17:44

And the winners are :

usernome · 04-01-2009, 18:52

And the winners are :

11-25-2008, 16:48	#1 (permalink)
kasra No Life Poster Join Date: Jan 2005 Location: Iran Age: 36 Posts: 748 Member: 103435 Status: Offline Thanks Meter: 49	n96 one sim double slider hi guys n96 one sim double slider can socket is 5pin like nokia 5610 5310 anyone can help me find pinout??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pinout n96 new pcb dual slid one sim card	omega-telecom	Infinity-Box	3	10-13-2012 13:09
turk lang on n95 double slider	mr_loverman	Infinity-Box	1	09-22-2008 21:54
turkish language on n95 double slider	mr_loverman	Infinity-Box	2	09-22-2008 21:31
N95 double slider pinout here	bifout	Infinity-Box	11	03-28-2008 19:32
N95 DOUBLE slider	hassan1975	Infinity-Box	1	01-13-2008 12:44

11-25-2008, 19:28	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! in most cases pinout is not in system connector. i would advice to examinate handsfree port or look for test points on PCB. i can teach how to do this by multimeter (voltage measuring)

11-26-2008, 08:03	#3 (permalink)
kasra No Life Poster Join Date: Jan 2005 Location: Iran Age: 36 Posts: 748 Member: 103435 Status: Offline Thanks Meter: 49	i must read the manual of find pinout with voltage measuring? or other solution?

11-26-2008, 19:05	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! 1. set multimeter to voltage measuring. 2. check bettery voltage, it should be more than 3,7volts 3. set one multimeter probe to some grounded phone part (if you cant find grounded part outside phone- you need to take out small thin wire from negative battery terminal) 4. with second probe touch one by one all phone pins (phone battery attached) (to get better result i would advice to set needle on the end of second probe) memorise pins with voltage between 2,7-2,9volts. those are tx/rx

11-26-2008, 19:46	#5 (permalink)
kasra No Life Poster Join Date: Jan 2005 Location: Iran Age: 36 Posts: 748 Member: 103435 Status: Offline Thanks Meter: 49	thanx for ure help i found the pinouts and i will get a image and upload it for other guys really thanx!!

11-26-2008, 21:05	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! we will wait your pinout picture for adding to our pinout collection. Thank you in advance!

11-27-2008, 19:51	#8 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! thank you very much! will be inculeded to out collection

04-01-2009, 13:44	#12 (permalink)
usernome No Life Poster Join Date: Jan 2003 Location: Iassy Age: 59 Posts: 4,314 Member: 19723 Status: Offline Thanks Meter: 359	Did anyone find the pinout ? Thanx !

04-01-2009, 15:15	#13 (permalink)
usernome No Life Poster Join Date: Jan 2003 Location: Iassy Age: 59 Posts: 4,314 Member: 19723 Status: Offline Thanks Meter: 359	I removed the processor but I don't know which are Rx and Tx .

04-01-2009, 17:44	#14 (permalink)
usernome No Life Poster Join Date: Jan 2003 Location: Iassy Age: 59 Posts: 4,314 Member: 19723 Status: Offline Thanks Meter: 359	And the winners are :