n99i restart please help me - GSM-Forum

summer_20xx · 03-28-2008, 23:32

first thing i bought my infinity+pin finder just today.
2nd i have now my first phone which is N99i, i found pinout successfully with auto-pin soft, minimized auto-pin soft, run chinese soft, but, when i try to read full flash it give me this

Quote:

COM279 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
high speed boot enabled
boot step size: 0400
error: bootcode load error: 6004E1A0A004E0819174E59F0004E1A0FF90EBFF0000E35000 261A00000AE156001A2A00715CE59F0000E35700048A000000 E35700150A000006EA007001E247FFF8EAFF0140E59F00B0E1 C40000E5D40080E310FFF80AFF001FE3A000B0E100
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 10 sec
Remove/Install battery now !

please what is the probleme ? should i select manually founded pinout in the soft? if yes how to do this?
please guide me i'm new in infinity and new in chinese phones

**InfinitySupport** · 03-29-2008, 01:19

Hello,

Just press and HOLD phone "Power" button during boot process (according to advice given by software).

summer_20xx · 03-29-2008, 11:39

I hold the power pressed , but always error, by the way how the software knows the pinout which he must use? take them auto from pin finder or i must write them some where?

andri · 03-29-2008, 15:14

hello!

pinfinder found second MCU (MCU_b) pinout.
if your phone restarts- you need to format First MCU (MCU_a).
for this run pinfider search, but dont push phone power button.
wait until it pass second MCU pinout and then press and keep pressed Power button.
then pinfinder will stop on next phone pinout

summer_20xx · 03-29-2008, 17:40

first thank u for ur replay, but i wanna know how to set founded pinout in the soft to work with them?

InfinityHelp · 03-29-2008, 20:59

hello!

no need to set anything.
as soon as pinout found- open chines miracle and start to work with phone

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
please help me to unlock N97 [ANSWERED]	longgiang81	Genie Universal	2	03-30-2010 09:18
6210n unlock please help me please	AVCITHETCNC	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	2	03-29-2010 18:21
N 70 Restarting please help me..	jaysu09	Nokia Base Band 5 ( BB-5 )	1	11-02-2008 21:22
C1100 automatic restart!!!Please help me!	moonster	VygisToolbox	10	02-20-2008 23:40
6600 restart please help me	sajithcellular	Nokia Hardware & Hardware Repair	3	01-16-2008 21:11

03-29-2008, 01:19	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Just press and HOLD phone "Power" button during boot process (according to advice given by software).

03-29-2008, 11:39	#3 (permalink)
summer_20xx No Life Poster Join Date: Aug 2005 Age: 39 Posts: 818 Member: 167622 Status: Offline Sonork: 100.1608761 Thanks Meter: 40	I hold the power pressed , but always error, by the way how the software knows the pinout which he must use? take them auto from pin finder or i must write them some where?

03-29-2008, 15:14	#4 (permalink)
andri Freak Poster Join Date: Jan 2002 Location: Tallinn Posts: 168 Member: 8496 Status: Offline Thanks Meter: 1	hello! pinfinder found second MCU (MCU_b) pinout. if your phone restarts- you need to format First MCU (MCU_a). for this run pinfider search, but dont push phone power button. wait until it pass second MCU pinout and then press and keep pressed Power button. then pinfinder will stop on next phone pinout

03-29-2008, 17:40	#5 (permalink)
summer_20xx No Life Poster Join Date: Aug 2005 Age: 39 Posts: 818 Member: 167622 Status: Offline Sonork: 100.1608761 Thanks Meter: 40	first thank u for ur replay, but i wanna know how to set founded pinout in the soft to work with them?

03-29-2008, 20:59	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! no need to set anything. as soon as pinout found- open chines miracle and start to work with phone