Need pac file for blu neo 5.0 - GSM-Forum

gorgans · 04-30-2016, 22:31

i NEED Flash file for neo 5.0 N010L. i found firmware on the net but screen shows white after flash. need pac file urgently

Operation : Check/Read Info [ v1.16 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 172 ]
Open Port Failed!

Reconnect Power/Cable!

Operation : Check/Read Info [ v1.16 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 172 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : scx35_sp7731gea_fwvga_fs251plus_dt
Model Brand : BLU
Model Device: scx35_sp7731gea_fwvga_fs251
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FWVGA_FS251
CompileDate : 9/13/2015 12:49:19 PM
Project Ver : BLU_N010L_V17_GENERIC_20150913_2048
Model Ext : BLU NEO 5.0

ExtraInfo : HWInfo not exists, normal phone
ExtraInfo : GSM Phone

Elapsed: 00:00:13

Reconnect Power/Cable!

mishaelwillo · 05-01-2016, 06:05

Have exact same problem. White screen after flash. Working on a solution will let you know.

Sent from my SM-N910T using Tapatalk

beerfoote1 · 05-07-2016, 00:14

I am waiting on this solution too. Thanks

04-30-2016, 22:31	#1 (permalink)
gorgans No Life Poster Join Date: May 2003 Location: Jamaica Posts: 1,967 Member: 28559 Status: Offline Thanks Meter: 85	Need pac file for blu neo 5.0 i NEED Flash file for neo 5.0 N010L. i found firmware on the net but screen shows white after flash. need pac file urgently Operation : Check/Read Info [ v1.16 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 172 ] Open Port Failed! Reconnect Power/Cable! Operation : Check/Read Info [ v1.16 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 172 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FLASH : eMMC Flash , Structure : Ok! Reading extended info ... Model Name : scx35_sp7731gea_fwvga_fs251plus_dt Model Brand : BLU Model Device: scx35_sp7731gea_fwvga_fs251 AndrVersion : 4.4.2 BaseBand CPU: SP7731GEA_FWVGA_FS251 CompileDate : 9/13/2015 12:49:19 PM Project Ver : BLU_N010L_V17_GENERIC_20150913_2048 Model Ext : BLU NEO 5.0 ExtraInfo : HWInfo not exists, normal phone ExtraInfo : GSM Phone Elapsed: 00:00:13 Reconnect Power/Cable!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-01-2016, 06:05	#2 (permalink)
mishaelwillo Freak Poster Join Date: Jul 2005 Location: Portmore, Jamaica Age: 52 Posts: 290 Member: 160245 Status: Offline Thanks Meter: 19	Have exact same problem. White screen after flash. Working on a solution will let you know. Sent from my SM-N910T using Tapatalk

05-07-2016, 00:14	#3 (permalink)
beerfoote1 No Life Poster Join Date: Jan 2006 Location: JAMAICA Age: 46 Posts: 1,493 Member: 220143 Status: Offline Thanks Meter: 108	I am waiting on this solution too. Thanks