NEXIAN GX-522 Dual SIM - Phone Lock - GSM-Forum

abellcell · 11-28-2009, 12:19

Dear Infinity Team,

I have read Eeprom by Chinese Miracle and Can not open User Lock code. and I tried using MModule GX-700 to read Eeprom okay try to open user lock code is okay.

But I get problem with SIM 1 insert sim/no signal and SIM 2 is okay but batere always said "EMPTY".

Would you please to make Eeprom files with user lock 0000 and used the two backup eeprom files.

http://rapidshare.com/files/31334171...1.B0E.rar.html

Thanks for attention n reply

Regards, ABELL Cellular
Bandung - ID

abellcell · 11-28-2009, 12:39

Herewith Log info:

==== log opened: [11/28/2009 5:53:34 PM] ====
Application: C:\Program Files\InfinityBox\MModule\MModule.exe
Loading data, wait...
[Infinity Box] MModule v2.96
S/N: 44ED:0112
Wait...
Device: Nexian-NX-G700
Done

==== log: [11/28/2009 5:53:47 PM] ====
COM3 [VCP0] selected
module v2.96
Device: Nexian-NX-G700
Checking data, wait...
advanced flash detection enabled
Action: "user code"
unlock method: standard
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:3303:0008
status: FF
high speed boot Off
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:0AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
searching rom info...
search rom info finished
rom info structure: 2nd [standard] generation
TCL-ID is absent
====================
New firmware detected (v.2.96, database date: 20.11.2009):
TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E505E_PR1 _V8.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info protocol ver: 05
ver. sw 1: TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E505E_PR1 _V8.BIN
ver. sw 2: E505E.PR1.V8, 00000000
address offset: 00000000
ffs offset/size: 00E00000/001FC000
ffs address assigned: 00E00000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: Nexian-NX-G700_TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E505 E_PR1_V8__ffs...
file saved: D:\Flash\Infinity\Nexian\G522\Nexian-NX-G700_TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E505 E_PR1_V8__ffs_20091128-175811.B0E.bin
flash: 98000300000001:0AEA0000000000
Backup required data Done
====> Patch required data ...
detection procedure, wait...
detection procedure completed
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
flash: 98000300000001:0AEA0000000000
Write: eeprom
Write Done
====> Finalization ...
Finalization Done
Finished, time used: 354 sec
Remove/Install battery now !

abellcell · 11-28-2009, 12:43

Dear Infinity Team,

It is possible to make new Support for Nexian NX-G522 in MModule???

Thanks n Regards,

abellcell · 11-28-2009, 12:57

Dear Infinity Team,

PHONE LABEL : Nexian NX-G522

Herewith backup uased Chinese Miracle:

http://www.4shared.com/file/16135877...B01_GPRS_.html

Thanks & Regards,

**InfinitySupport** · 11-28-2009, 21:31

Hello,

To make support for this phone we need to get FULL FLASH backup file, but not only eeprom backup file !

Also, what is this phone pinout ?

abellcell · 11-30-2009, 05:58

Quote:

Originally Posted by InfinitySupport

Hello,

To make support for this phone we need to get FULL FLASH backup file, but not only eeprom backup file !

Also, what is this phone pinout ?

Thanks for ur reply

Pinout : Cable L10C 4 = RX & 5 = TX

I tried to backup fullflash but in procesing phone buzzer out "kerrrrr kerrr ...." it is I found also from another nexian like G700 and G900 some problem.

This is not problem??? and Why???

Thanks & Regards,

**InfinitySupport** · 11-30-2009, 11:51

Hello,

I think it may be a result of empty battery.
Please, charge battery completely and repeat flash read process.

abellcell · 11-30-2009, 13:46

sirs, i was trying used batere but not working, and i used pinfinder power it is okay.

but same problem buzzer ...

rgds

**InfinitySupport** · 11-30-2009, 14:45

Hello,

Please, try to read full flash with "Chinese Miracle" software, select model "MT6205 NOR".
Please, send full flash backup file to [email protected]

abellcell · 12-01-2009, 08:25

Hello,

I have backup fullflash and was to ur email, herewith the link : http://www.4shared.com/file/16324374...2862/G522.html

Regards,

**InfinitySupport** · 12-03-2009, 03:07

Hello,

Flash files uploaded in support area.
Software uploaded in support area.
Please, download and use new MModule v2.98, let's see results.

11-28-2009, 12:19	#1 (permalink)
abellcell Registered User Join Date: Mar 2007 Location: Bandung, Indonesia Posts: 384 Member: 461468 Status: Offline Thanks Meter: 139	NEXIAN GX-522 Dual SIM - Phone Lock Dear Infinity Team, I have read Eeprom by Chinese Miracle and Can not open User Lock code. and I tried using MModule GX-700 to read Eeprom okay try to open user lock code is okay. But I get problem with SIM 1 insert sim/no signal and SIM 2 is okay but batere always said "EMPTY". Would you please to make Eeprom files with user lock 0000 and used the two backup eeprom files. http://rapidshare.com/files/31334171...1.B0E.rar.html Thanks for attention n reply Regards, ABELL Cellular Bandung - ID Last edited by abellcell; 11-28-2009 at 12:29.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to add USSD function to SIM B Dual Sim Phone?	DualSimCell	Chinese Models & Cloned Phones	0	04-10-2008 04:59
Show Operator Name on SIM B Dual Sim Phones	DualSimCell	Chinese Models & Cloned Phones	0	04-10-2008 04:55
WND DUal-SIM Phone?	expert_tech	Various	2	01-11-2008 07:22
chinse dual sim phone restarts.Pls help	dinkayahu	Infinity-Box	3	10-26-2007 15:21

11-28-2009, 12:39	#2 (permalink)
abellcell Registered User Join Date: Mar 2007 Location: Bandung, Indonesia Posts: 384 Member: 461468 Status: Offline Thanks Meter: 139	Herewith Log info: ==== log opened: [11/28/2009 5:53:34 PM] ==== Application: C:\Program Files\InfinityBox\MModule\MModule.exe Loading data, wait... [Infinity Box] MModule v2.96 S/N: 44ED:0112 Wait... Device: Nexian-NX-G700 Done ==== log: [11/28/2009 5:53:47 PM] ==== COM3 [VCP0] selected module v2.96 Device: Nexian-NX-G700 Checking data, wait... advanced flash detection enabled Action: "user code" unlock method: standard ffs/eeprom backup enabled, it may takes several minutes ! ====> Boot ... Press and HOLD Power button now ! baud autodetection active 19200 autodetect Connecting, wait... Initializing [6225:8A05:8A00]... CPU: MT6225 chip: 0001:3303:0008 status: FF high speed boot Off boot packet size: 0400 Release Power button now ! Boot Done ====> Initialize ... detecting chip #00 in region #00... flash: 98000300000001:0AEA0000000000 flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb number of flash chip/regions detected: 01/01 Initialize Done ====> Set baud ... 115200 Set baud Done ====> Initialize bootcode ... Initialize bootcode Done ====> Check firmware integrity ... searching rom info... search rom info finished rom info structure: 2nd [standard] generation TCL-ID is absent ==================== New firmware detected (v.2.96, database date: 20.11.2009): TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E505E_PR1 _V8.BIN This firmware is missing in support area. If this phone is good and working: - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com - include in your e-mail full text from phone back label (phone name etc.) ==================== rom info detection finished rom info protocol ver: 05 ver. sw 1: TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E505E_PR1 _V8.BIN ver. sw 2: E505E.PR1.V8, 00000000 address offset: 00000000 ffs offset/size: 00E00000/001FC000 ffs address assigned: 00E00000 sec info (detailed) detection... searching sec info#1... . search sec info#1 finished Check firmware integrity Done ====> Check firmware content ... Check firmware content Done ====> Backup required data ... reading: Nexian-NX-G700_TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E505 E_PR1_V8__ffs... file saved: D:\Flash\Infinity\Nexian\G522\Nexian-NX-G700_TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E505 E_PR1_V8__ffs_20091128-175811.B0E.bin flash: 98000300000001:0AEA0000000000 Backup required data Done ====> Patch required data ... detection procedure, wait... detection procedure completed Patch required data Done ====> Special operation ... Special operation Done ====> Write ... flash: 98000300000001:0AEA0000000000 Write: eeprom Write Done ====> Finalization ... Finalization Done Finished, time used: 354 sec Remove/Install battery now !

11-28-2009, 12:43	#3 (permalink)
abellcell Registered User Join Date: Mar 2007 Location: Bandung, Indonesia Posts: 384 Member: 461468 Status: Offline Thanks Meter: 139	Dear Infinity Team, It is possible to make new Support for Nexian NX-G522 in MModule??? Thanks n Regards,

11-28-2009, 12:57	#4 (permalink)
abellcell Registered User Join Date: Mar 2007 Location: Bandung, Indonesia Posts: 384 Member: 461468 Status: Offline Thanks Meter: 139	Dear Infinity Team, PHONE LABEL : Nexian NX-G522 Herewith backup uased Chinese Miracle: http://www.4shared.com/file/16135877...B01_GPRS_.html Thanks & Regards,

11-28-2009, 21:31	#5 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, To make support for this phone we need to get FULL FLASH backup file, but not only eeprom backup file ! Also, what is this phone pinout ?

11-30-2009, 11:51	#7 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, I think it may be a result of empty battery. Please, charge battery completely and repeat flash read process.

11-30-2009, 13:46	#8 (permalink)
abellcell Registered User Join Date: Mar 2007 Location: Bandung, Indonesia Posts: 384 Member: 461468 Status: Offline Thanks Meter: 139	sirs, i was trying used batere but not working, and i used pinfinder power it is okay. but same problem buzzer ... rgds

11-30-2009, 14:45	#9 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Please, try to read full flash with "Chinese Miracle" software, select model "MT6205 NOR". Please, send full flash backup file to [email protected]

12-01-2009, 08:25	#10 (permalink)
abellcell Registered User Join Date: Mar 2007 Location: Bandung, Indonesia Posts: 384 Member: 461468 Status: Offline Thanks Meter: 139	Hello, I have backup fullflash and was to ur email, herewith the link : http://www.4shared.com/file/16324374...2862/G522.html Regards,

12-03-2009, 03:07	#11 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Flash files uploaded in support area. Software uploaded in support area. Please, download and use new MModule v2.98, let's see results.