"no network" on hiphone f1. Please help ! - GSM-Forum

Unlocker_001 · 06-03-2009, 12:10

I have 1hiphone f1 and no network. How i can resolve this problem? I format phone, flash but no succes. Any sugestions or other method. Thanks

InfinityHelp · 06-03-2009, 22:55

hello!

restore valid IMEI number

Unlocker_001 · 06-04-2009, 15:31

hi. Imei number is valid.

InfinityHelp · 06-04-2009, 23:01

hello!

remove smart card and try to call 112 (emergency call)
what result do you get?

Unlocker_001 · 06-05-2009, 13:46

I get "unable to connect"

InfinityHelp · 06-05-2009, 23:15

hello!

very big chances that this phone has hardware failure or you trying to connect unsupported network type (f.e. 1900mhz)

Unlocker_001 · 06-08-2009, 08:57

my network is 900mhz

yerdna · 06-09-2009, 08:56

Helllo,

I have two phones with this problem. I cant detect NETWORK TOO.

How can I restore VALID IMEI NUMBER? How do you know which IMEI is VALID for this phone? I dont have paper with IMEI, this phone is not mine, but phone is in GOOD CONDITION..

Need I use FORMAT FLASH FFS? OR what??? Thanks, a lot

InfinityHelp · 06-11-2009, 20:45

hello!

make format FFS complete.
valid IMEI value can be taken from any working mobile phone
read it from sticker and write to phone using IMEI writing option

yerdna · 06-15-2009, 23:23

and once again:

I dont understand, how can I write this IMEI with P
HONE SHOULD BE ON??

Must there BATTERY attached?? or how can I phone switch on???

InfinityHelp · 06-16-2009, 22:18

hello!

do you use pinfinder or not?

yerdna · 06-17-2009, 12:13

Yes, sure, I am using INFINITY BOX and PIN FINDER ADAPTER. too

InfinityHelp · 06-17-2009, 22:08

hello!

when you use pinfinder battery is not needed.
do following: activate silent mode in phone by pressing and holding "#" button.
remove battery, connect power crocodilles.
push "power" button in pinfinder software.
RED LED must start shining.
now power On phone and use method-1 for IMEi writing

Unlocker_001 · 06-18-2009, 08:41

"activate silent mode in phone by pressing and holding "#" button" WHY IS NEED THAT?

InfinityHelp · 06-18-2009, 10:54

hello!

pinfinder use USB power for powering your phone.
some chinese phones take too much power when play loud startup tone.
this is why they can not be powered fully.
when you disable sounds- phone powers on from box power without any problem

06-03-2009, 12:10	#1 (permalink)
Unlocker_001 No Life Poster Join Date: Oct 2007 Location: Moldova Posts: 844 Member: 614304 Status: Offline Thanks Meter: 150	"no network" on hiphone f1. Please help ! I have 1hiphone f1 and no network. How i can resolve this problem? I format phone, flash but no succes. Any sugestions or other method. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I-Phone 2g: Help on imei repair: PLEASE HELP!!!	Gazzer8866	iPhone 2 / iPhone 3G / iPhone 3GS	3	09-21-2009 14:26
need help with changing IMEI on BE4 v138, please help	pali	Alcatel & TCL Old Models	0	06-13-2002 18:23
PB EEPROM 3 on Sagem MC919, please help me to fix	pali	Infineon C16X M51 & ARM7 M52 BASED	1	03-30-2002 19:09
Test/Clone Card on Goldwafer problems. Please help !	Squesch	Motorola Old Legacy (EMMI)	5	10-23-2001 00:57
Unauthorised action dec..on gd 30 please help	gsmonline	Panasonic	3	08-22-2001 07:36

06-03-2009, 22:55	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! restore valid IMEI number

06-04-2009, 15:31	#3 (permalink)
Unlocker_001 No Life Poster Join Date: Oct 2007 Location: Moldova Posts: 844 Member: 614304 Status: Offline Thanks Meter: 150	hi. Imei number is valid.

06-04-2009, 23:01	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! remove smart card and try to call 112 (emergency call) what result do you get?

06-05-2009, 13:46	#5 (permalink)
Unlocker_001 No Life Poster Join Date: Oct 2007 Location: Moldova Posts: 844 Member: 614304 Status: Offline Thanks Meter: 150	I get "unable to connect"

06-05-2009, 23:15	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! very big chances that this phone has hardware failure or you trying to connect unsupported network type (f.e. 1900mhz)

06-08-2009, 08:57	#7 (permalink)
Unlocker_001 No Life Poster Join Date: Oct 2007 Location: Moldova Posts: 844 Member: 614304 Status: Offline Thanks Meter: 150	my network is 900mhz

06-09-2009, 08:56	#8 (permalink)
yerdna Insane Poster Join Date: Apr 2009 Posts: 73 Member: 1012502 Status: Offline Thanks Meter: 2	Helllo, I have two phones with this problem. I cant detect NETWORK TOO. How can I restore VALID IMEI NUMBER? How do you know which IMEI is VALID for this phone? I dont have paper with IMEI, this phone is not mine, but phone is in GOOD CONDITION.. Need I use FORMAT FLASH FFS? OR what??? Thanks, a lot

06-11-2009, 20:45	#9 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! make format FFS complete. valid IMEI value can be taken from any working mobile phone read it from sticker and write to phone using IMEI writing option

06-15-2009, 23:23	#10 (permalink)
yerdna Insane Poster Join Date: Apr 2009 Posts: 73 Member: 1012502 Status: Offline Thanks Meter: 2	and once again: I dont understand, how can I write this IMEI with P HONE SHOULD BE ON?? Must there BATTERY attached?? or how can I phone switch on???

06-16-2009, 22:18	#11 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! do you use pinfinder or not?

06-17-2009, 12:13	#12 (permalink)
yerdna Insane Poster Join Date: Apr 2009 Posts: 73 Member: 1012502 Status: Offline Thanks Meter: 2	Yes, sure, I am using INFINITY BOX and PIN FINDER ADAPTER. too

06-17-2009, 22:08	#13 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! when you use pinfinder battery is not needed. do following: activate silent mode in phone by pressing and holding "#" button. remove battery, connect power crocodilles. push "power" button in pinfinder software. RED LED must start shining. now power On phone and use method-1 for IMEi writing

06-18-2009, 08:41	#14 (permalink)
Unlocker_001 No Life Poster Join Date: Oct 2007 Location: Moldova Posts: 844 Member: 614304 Status: Offline Thanks Meter: 150	"activate silent mode in phone by pressing and holding "#" button" WHY IS NEED THAT?

06-18-2009, 10:54	#15 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! pinfinder use USB power for powering your phone. some chinese phones take too much power when play loud startup tone. this is why they can not be powered fully. when you disable sounds- phone powers on from box power without any problem