No power on after Prepare C168 - GSM-Forum

zbycho9 · 10-03-2007, 10:01

hello I got this problem after prepare option there is error and now when I prepare again I got this log

COM3 [VCP0] selected
Device: Motorola C168
Checking data, wait...
Action: unlock (prepare)
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
SW ver: 1390-000
HW ver: TCT-7-
Check Flash Done
Check Parameters...
file saved: backup_eeprom_calibration_20071003-105707.69E.bin
error: unknown or damaged device, read flash and send to support
Check Parameters Fail
Finished, time used: 70 sec
Remove/Install battery now !

fon is not power on in this moment

I try to re-write calibration eprom buckup but noting change what i must do to back him to life

eprom??
full flash ??

Regards

T0T0 · 10-03-2007, 10:14

bro.... you have to fullflash with main, lang,flex.. your problem is solve

InfinityHelp · 10-03-2007, 14:33

hello!

yes, that is right. flash your phone and it will be back to working state

10-03-2007, 10:01	#1 (permalink)
zbycho9 Registered User Join Date: Mar 2006 Location: Poland Posts: 141 Member: 247785 Status: Offline Thanks Meter: 4	No power on after Prepare C168 hello I got this problem after prepare option there is error and now when I prepare again I got this log COM3 [VCP0] selected Device: Motorola C168 Checking data, wait... Action: unlock (prepare) Boot... Phone should be Switched OFF ! Press Power button now ! Connecting... Boot Done Check Connection... Check Connection Done Set Baud... Set Baud Done Check Flash... SW ver: 1390-000 HW ver: TCT-7- Check Flash Done Check Parameters... file saved: backup_eeprom_calibration_20071003-105707.69E.bin error: unknown or damaged device, read flash and send to support Check Parameters Fail Finished, time used: 70 sec Remove/Install battery now ! fon is not power on in this moment I try to re-write calibration eprom buckup but noting change what i must do to back him to life eprom?? full flash ?? Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hardware Repair Series : 7210-6610 no power on after flash	GSM Coolhawk	Nokia Repair Guide and FAQ	86	06-27-2011 11:52
w220 not power on after prepare	vadimv	Infinity-Box	6	06-04-2007 07:35
SL55 No Power On After trying to unlock.	majidsam	E-Gold Based Phones	16	02-26-2005 09:24
R520m no power ON after flash	pepik	Old Ericsson Phones & Sony Phones	0	08-26-2004 21:38
j6 no power on after typing codes	iHi	Sony	0	05-01-2002 20:09

10-03-2007, 10:14	#2 (permalink)
T0T0 Registered User Join Date: Aug 2007 Location: bohol philippines Age: 42 Posts: 1,031 Member: 572549 Status: Offline Thanks Meter: 175	bro.... you have to fullflash with main, lang,flex.. your problem is solve

10-03-2007, 14:33	#3 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! yes, that is right. flash your phone and it will be back to working state