GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 07-28-2017, 17:40   #1 (permalink)
Freak Poster
 
Join Date: Mar 2007
Location: Turkey
Age: 39
Posts: 386
Member: 464619
Status: Offline
Thanks Meter: 37
nokıa 3310 coolsand cpu error imei repair


Chinese Miracle II [RDA module] v 1.05

Operation : Factory Area Rebuild [Repair IMEI]

Waiting phone ...
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init : CCCCCCCC
Settings registers ...
1st boot Ok
==== CPU
CPU_ID : 0809 , rev : 0007
CPU_CN :
==== FLASH
FL_VEN : 0000 , rev : 0000
FL_CNM :
FL_CAP : 00000000
Initial : 81C0024C
==== Booting
Sending RamRun Loader ...
Set : 0809 , 00000000
Boot File Not Found! CPU not Supported , or BootFiles are missng. Contact to Support!
  Reply With Quote
The Following 2 Users Say Thank You to hidayetsimsek For This Useful Post:
Old 07-31-2017, 15:08   #2 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 15,948
Member: 462970
Status: Offline
Thanks Meter: 15,633
Hello. Does device is alive?
  Reply With Quote
Old 07-31-2017, 16:39   #3 (permalink)
No Life Poster
 
sneha's Avatar
 
Join Date: Aug 2006
Location: BHARAT
Posts: 2,950
Member: 327043
Status: Offline
Sonork: 100.1587811
Thanks Meter: 1,440
Quote:
Originally Posted by JayDi View Post
Hello. Does device is alive?
yes i have chinees set which show same log device is alive

Code:
Operation : Format File System
Settings : SmartFormat is On

Waiting phone ... 
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init  : CCCCCCCC
Settings registers ... 
1st boot Ok
==== CPU
CPU_ID : 0809 , rev : 0007
CPU_CN : 
==== FLASH
FL_VEN : 0000 , rev : 0000
FL_CNM : 
FL_CAP : 00000000
Initial : 7F5AEFB8
==== Booting
Sending RamRun Loader ...
Set : 0809 , 00000000
Boot File Not Found! CPU not Supported , or BootFiles are missng. Contact to Support!

Reconnect Power/Cable!
  Reply With Quote
Old 07-31-2017, 16:45   #4 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 15,948
Member: 462970
Status: Offline
Thanks Meter: 15,633
Ok, then need try to find such devices.
  Reply With Quote
The Following User Says Thank You to JayDi For This Useful Post:
Old 09-15-2017, 07:49   #5 (permalink)
No Life Poster
 
Join Date: Feb 2015
Location: Ph
Posts: 572
Member: 2348059
Status: Offline
Sonork: 100.293844
Thanks Meter: 29
how to boot this phone

have password problem
  Reply With Quote
Old 09-15-2017, 08:22   #6 (permalink)
No Life Poster
 
mbiborna's Avatar
 
Join Date: May 2008
Posts: 2,796
Member: 770503
Status: Offline
Thanks Meter: 1,062
Quote:
Originally Posted by TheDR View Post
how to boot this phone

have password problem
Use This Software & about How to boot ? follow Software log.

http://forum.gsmhosting.com/vbb/f296...upport-2264357
  Reply With Quote
Old 10-10-2017, 15:20   #7 (permalink)
No Life Poster
 
turkcellgsm's Avatar
 
Join Date: Nov 2006
Location: Türkiye
Posts: 1,272
Member: 395431
Status: Offline
Thanks Meter: 437
nokia 3310 info Infinity-Box Chinese Miracle II SCR (SPD/RDA ServiceTool) v1.00 - SC6533G support

Quote:
Card found : xxxxxxx , v0136
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.00


Operation : Identify [ v1.00 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Identify : Code Integrity Check pass!

Device Info Details :
[0] : SC6533
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : nv3029f/nv3029g/st7789/gc9305/ili9325
[7] : byd3A01/gc6133/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2017-06-19_15:43:13
[12] : HA001_240320_HZX_3310_GOODLUCK_TuEnFrPoArPe_R50157

Done!
Elapsed: 00:01:59

Reconnect Power/Cable!
  Reply With Quote
Old 11-07-2017, 09:59   #8 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 36
Posts: 9,597
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,593
Quote:
Originally Posted by JayDi View Post
Hello. Does device is alive?
hey..

boot pb on another working device,

device info;

Code:
Operation : Check Device / Info
======= Settings
Settings : Read AllInfo is Off
Settings : Full Boot disabled by default

Waiting phone ... 
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init  : 54414E4F
Settings registers ... 
1st boot Ok
==== CPU
CPU_ID : 0809 , rev : 0007
CPU_CN : 
==== FLASH
FL_VEN : 0000 , rev : 0000
FL_CNM : 
FL_CAP : 00000000
Initial : 81C0024C
Boot Done!

Elapsed: 00:00:35
Done
Reconnect Power/Cable!
Read full Flash;

Code:
Operation : Read FullFlash
======= Settings
Settings : SafeMode is Off [Fast]
Settings : Make IFF (MCU) file
Settings : Make Calibration file

Waiting phone ... 
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init  : 54414E4F
Settings registers ... 
1st boot Ok
==== CPU
CPU_ID : 0809 , rev : 0007
CPU_CN : 
==== FLASH
FL_VEN : 0000 , rev : 0000
FL_CNM : 
FL_CAP : 00000000
Initial : 81C0024C
==== Booting
Sending RamRun Loader ...
Set : 0809 , 00000000
Boot File Not Found! CPU not Supported , or BootFiles are missng. Contact to Support!

Reconnect Power/Cable!
  Reply With Quote
Old 11-07-2017, 10:06   #9 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 36
Posts: 9,597
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,593
Quote:
Originally Posted by turkcellgsm View Post
nokia 3310 info Infinity-Box Chinese Miracle II SCR (SPD/RDA ServiceTool) v1.00 - SC6533G support
yes it is booting with SCR Module..

Code:
Operation : Read Flash [ v1.00 ]

----- > Powered On : 
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off : 
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ... 

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU  : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV  : 0xFBA2A250
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details : 
[0] : SC6533
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : nv3029f/nv3029g/st7789/gc9305/ili9325
[7] : byd3A01/gc6133/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2017-06-30_14:16:02
[12] : HA001_240320_JM_3310_WELCOME_TuEn_R50860

Saved to : C:\Users\Desktop\CoolSand\Nokia_3310\
Saved as : SC6533G_4MiB_SC6533_HA001_240320_JM_3310_WELCOME_TuEn_R50860_2017-06-30_141602.ilod


Done!
Elapsed: 00:01:06

Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 03:28.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.30406 seconds with 7 queries

SEO by vBSEO