OALE X1 after Flash Set Dead :( (EMMC R/O Test Passed ) - GSM-Forum

syed tuqeer · 02-20-2019, 07:51

Code:

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 188 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 1501003030434E5630011504081481CB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , 0VNC0
[eMMC] : FLASH_CID : 1501003030434E5630011504081481CB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x2BFA537D5047E782847C7056CB54CF1C
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : alps
ProdName  : full_gxq6580_weg_l
ProdModel : gxq6580_weg_l
Device    : gxq6580_weg_l
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69

SECURITY : 
IMEI_SW [1] : 356651091269530
IMEI_SW [2] : 356651091269548
BTMAC Addr  : 6651091089BB
WiFi MAC    : 000000000000

Done!
Elapsed: 00:00:05
Reconnect Power/Cable!

Code:

Operation : HW Test [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 188 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 1501003030434E5630011504081481CB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , 0VNC0
[eMMC] : FLASH_CID : 1501003030434E5630011504081481CB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x2BFA537D5047E782847C7056CB54CF1C
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


[Processing] FlashMemory Read-Write test
[eMMC] : [SAMSUNG] , 0VNC0 , 0x1D2000000 , 7456 MiB
[eMMC] : CID : 1501003030434E5630011504081481CB

[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!

[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!

All Done!

Done!
Elapsed: 00:00:30
Reconnect Power/Cable!

Phone Dead , after Flash

Code:

Scatter Load Ok , BaseBand : MT6580 , Project : gxq6580_weg_l , Storage : EMMC
Files found : 9 , Set to Flash : 8
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 188 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 1501003030434E5630011504081481CB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , 0VNC0
[eMMC] : FLASH_CID : 1501003030434E5630011504081481CB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x2BFA537D5047E782847C7056CB54CF1C
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : gxq6580_weg_l , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : Only one records found, and determined as universal
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 4016 mV
BL : BatteryLevel Ok

Backup enabled!
Backup saved : Backup\Flash\1501003030434E5630011504081481CB\

BL : Flash Pre-Erase
Total blocks to Erase : 1
Erase : 0x0000000001C80000-0x00000000D8B80000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_gxq6580_weg_l.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
[SpecOp] : Extend UserArea
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:03:23

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:22

Update Mirror PMT
[SpecOp] : Extend UserArea
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:03
Reconnect Power/Cable!

Now connecting error

Code:

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 188 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 1501003030434E5630011504081481CB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now

[DA_ERROR] : DA Init failed!
Something wrong with battery or connection!
Boot Error!

Operation Failed
Elapsed: 00:00:14
Reconnect Power/Cable!

sahassan82 · 02-20-2019, 09:24

http://forum.gsmhosting.com/vbb/13488772-post1.html

syed tuqeer · 02-20-2019, 10:24

Hello,
Read / Check Logs...
Now connecting error

talukder22 · 02-20-2019, 10:45

bro flash with latest sp tool

syed tuqeer · 02-21-2019, 09:39

Hello,
any way to fix it ?

sahassan82 · 02-21-2019, 10:03

Download this file & flash with cm2

(SYED AYAZ )X1_OL_P100_OALE_V006_20170719.rar

https://mega.nz/#F!Fc5jTQ4L!9o2JxCPTvv6fQ6wb_6F6nQ

ghr · 02-21-2019, 10:18

emmc gone needed to repalce if u pakistani then u can send me ur phone for repairng emmc thanks

syed tuqeer · 02-21-2019, 10:20

Hello,
read logs again

connecting error now (i flashed with your file)

Code:

[DA_ERROR] : DA Init failed!
Something wrong with battery or connection!
Boot Error!

Operation Failed
Elapsed: 00:00:14
Reconnect Power/Cable!

ghr · 02-21-2019, 10:57

is u disconect the battery and reconect again

Arslanmayo · 02-21-2019, 11:34

Quote:

Originally Posted by syed tuqeer

Hello,
read logs again

connecting error now (i flashed with your file)

Code:

[DA_ERROR] : DA Init failed!
Something wrong with battery or connection!
Boot Error!

Operation Failed
Elapsed: 00:00:14
Reconnect Power/Cable!

always skip preloader file

syed tuqeer · 02-21-2019, 12:00

Quote:

Originally Posted by ghr

is u disconect the battery and reconect again

yes , i already tried but same ,

Quote:

Originally Posted by Arslanmayo

always skip preloader file

Its , check /connecting logs...
how to is possible to flash without proper connecting

Kirumira · 02-21-2019, 13:42

Emmc R/O Check is not accurate.Needs more improvement now due to Hardware Changes,
I got same problem for two different phones,Now Dead.
Anybody wants logs i will provide.

syed tuqeer · 02-21-2019, 14:04

Quote:

Originally Posted by Kirumira

Emmc R/O Check is not accurate.Needs more improvement now due to Hardware Changes,
I got same problem for two different phones,Now Dead.
Anybody wants logs i will provide.

So ?

How did you solve your problem ? EMMC change ?

please post logs here

syed tuqeer · 02-24-2019, 08:15

Hello,

Code:

Operation : Write Flash [ v2.05 ]

Repartition   : Enabled
Flash Verify  : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Disabled
SData Backup  : Disabled
Safe UserData : Disabled

Files :9
[FL] : Set : preloader_gxq6580_weg_l.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : logo.bin
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x456B77E5 [ 1.08 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM216)
MODE : PRELOADER PORT
PORT : 216
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 30000115564E433004150130CB811408
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info


        NONE: 0x00000000 [ 0 B ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 0000000000000000

 STATUS : OK
 BSTYLE : OK

DA : USB : 
DA : USB : Change Port Speed
PTFN : PreLoader USB VCOM Port (COM216)
MODE : PRELOADER PORT
PORT : 216

Error : Failed to open port!
SEC_DL : False ()

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!


OK
SEC_ID : 0x00000000000000000000000000000000

[FL] : RePartition 
ERR : 0xC0030007
ERR : INVALID_PARAMETERS
ERR : 0x00000000|0x00000000

Error : Flashing failed!
Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!

**Brka** · 02-25-2019, 04:43

As more you try, the more you will damage (already damaged) BOOT SECTION of eMMC.
At some point, it will start showing wrong/not found eMMC ID's.

All of those sympthoms, are sign of malfunctioned eMMC memory, as stated already in post #7,
and that is neither BOX software problem, nor is flash file problem, but hardware problem,
which can be solved by pshysically REPLACING flash memory chip.

I have personally seen a LOT phones with various hangs, google errors,
storage errors, boot-loop problems, all caused by eMMC malfunction,
and such things are common today, especially with such no-name cheapest china-made phones/tablets/devices.

b.r.
Alex

02-21-2019, 10:20	#8 (permalink)
syed tuqeer No Life Poster Join Date: Dec 2007 Location: PAKISTAN Posts: 8,860 Member: 654997 Status: Offline Sonork: 1613804(Don't Spam Plz) Thanks Meter: 4,073	Hello, read logs again connecting error now (i flashed with your file) Code: [DA_ERROR] : DA Init failed! Something wrong with battery or connection! Boot Error! Operation Failed Elapsed: 00:00:14 Reconnect Power/Cable!

02-25-2019, 04:43	#15 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,784	As more you try, the more you will damage (already damaged) BOOT SECTION of eMMC. At some point, it will start showing wrong/not found eMMC ID's. All of those sympthoms, are sign of malfunctioned eMMC memory, as stated already in post #7, and that is neither BOX software problem, nor is flash file problem, but hardware problem, which can be solved by pshysically REPLACING flash memory chip. I have personally seen a LOT phones with various hangs, google errors, storage errors, boot-loop problems, all caused by eMMC malfunction, and such things are common today, especially with such no-name cheapest china-made phones/tablets/devices. b.r. Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

02-20-2019, 09:24	#2 (permalink)
sahassan82 No Life Poster Join Date: Feb 2005 Location: Pakistan Posts: 977 Member: 116955 Status: Offline Sonork: 100.1604268 Thanks Meter: 992	http://forum.gsmhosting.com/vbb/13488772-post1.html

02-20-2019, 10:24	#3 (permalink)
syed tuqeer No Life Poster Join Date: Dec 2007 Location: PAKISTAN Posts: 8,860 Member: 654997 Status: Offline Sonork: 1613804(Don't Spam Plz) Thanks Meter: 4,073	Hello, Read / Check Logs... Now connecting error

02-20-2019, 10:45	#4 (permalink)
talukder22 Insane Poster Join Date: Jan 2019 Location: BANGLADESH Posts: 70 Member: 2888909 Status: Offline Thanks Meter: 31	bro flash with latest sp tool

02-21-2019, 09:39	#5 (permalink)
syed tuqeer No Life Poster Join Date: Dec 2007 Location: PAKISTAN Posts: 8,860 Member: 654997 Status: Offline Sonork: 1613804(Don't Spam Plz) Thanks Meter: 4,073	Hello, any way to fix it ?

02-21-2019, 10:03	#6 (permalink)
sahassan82 No Life Poster Join Date: Feb 2005 Location: Pakistan Posts: 977 Member: 116955 Status: Offline Sonork: 100.1604268 Thanks Meter: 992	Download this file & flash with cm2 (SYED AYAZ )X1_OL_P100_OALE_V006_20170719.rar https://mega.nz/#F!Fc5jTQ4L!9o2JxCPTvv6fQ6wb_6F6nQ

02-21-2019, 10:18	#7 (permalink)
ghr No Life Poster Join Date: Apr 2010 Location: chishtian Posts: 1,335 Member: 1282787 Status: Offline Sonork: 100.1673491 Thanks Meter: 307	emmc gone needed to repalce if u pakistani then u can send me ur phone for repairng emmc thanks

02-21-2019, 10:57	#9 (permalink)
ghr No Life Poster Join Date: Apr 2010 Location: chishtian Posts: 1,335 Member: 1282787 Status: Offline Sonork: 100.1673491 Thanks Meter: 307	is u disconect the battery and reconect again

02-21-2019, 13:42	#12 (permalink)
Kirumira No Life Poster Join Date: Dec 2004 Location: Uganda Age: 45 Posts: 2,920 Member: 96478 Status: Offline Sonork: 100.1674604 Thanks Meter: 1,420	Emmc R/O Check is not accurate.Needs more improvement now due to Hardware Changes, I got same problem for two different phones,Now Dead. Anybody wants logs i will provide.