OPPO F1S A1601 full tested with new MTK V2.00 r1 - GSM-Forum

rebainoor · 04-17-2018, 11:27

read info success :

Code:

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 150100525831424D420747A3E08393E7
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C007F322F06E70A4DF22C5B24A8062B5

DA : USB : FULL-SPEED

Boot done!

Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.33
SW OTA Version : A1601EX_11.A.33_INT_033_201708142235
SW OTA Name    : A1601EX_11_A.33_170814
Display ID     : A1601EX_11_A.33_170814
Kernel Info    : 3.10.72-G201708142235
Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.33
SW OTA Version : A1601EX_11.A.33_INT_033_201708142235
SW OTA Name    : A1601EX_11_A.33_170814
Display ID     : A1601EX_11_A.33_170814
Kernel Info    : 3.10.72-G201708142235
Patch Level    : LMY47I
Ver. CodeName  : REL
Ver. Release   : 5.1
Sec. Patch     : 2017-08-05
Build Time     : 1502723862
Product Manfct : OPPO
Board Platform : mt6750
Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.33
SW OTA Version : A1601EX_11.A.33_INT_033_201708142235
SW OTA Name    : A1601EX_11_A.33_170814
Display ID     : A1601EX_11_A.33_170814
Kernel Info    : 3.10.72-G201708142235

IMEI[0] : 863632xxxxxxxxx
IMEI[1] : 863632xxxxxxxxx
NVRAM check : Passed!

Done!
Elapsed: 00:00:21

FULL FACTORY (WIPE+FRP) failed

Code:

Operation : Reset Settings/Format FS [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 150100525831424D420747A3E08393E7
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C007F322F06E70A4DF22C5B24A8062B5

DA : USB : FULL-SPEED

Boot done!

ERR : 0xC002002A
ERR : SEC_IMG_TYPE_MISMATCH
ERR : 0x00001000|0x00001000

Error : Failed to write data!
Try select another format mode!

FORCED USER FORMAT SUCCESS :

Code:

Operation : Reset Settings/Format FS [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 150100525831424D420747A3E08393E7
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C007F322F06E70A4DF22C5B24A8062B5

DA : USB : FULL-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE

Done!
Elapsed: 00:00:23

READ FIRMWARE FAILED :

Code:

Operation : Read Firmware [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 150100525831424D420747A3E08393E7
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C007F322F06E70A4DF22C5B24A8062B5

DA : USB : FULL-SPEED

Boot done!

Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.33
SW OTA Version : A1601EX_11.A.33_INT_033_201708142235
SW OTA Name    : A1601EX_11_A.33_170814
Display ID     : A1601EX_11_A.33_170814
Kernel Info    : 3.10.72-G201708142235
Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.33
SW OTA Version : A1601EX_11.A.33_INT_033_201708142235
SW OTA Name    : A1601EX_11_A.33_170814
Display ID     : A1601EX_11_A.33_170814
Kernel Info    : 3.10.72-G201708142235
Patch Level    : LMY47I
Ver. CodeName  : REL
Ver. Release   : 5.1
Sec. Patch     : 2017-08-05
Build Time     : 1502723862
Product Manfct : OPPO
Board Platform : mt6750
Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.33
SW OTA Version : A1601EX_11.A.33_INT_033_201708142235
SW OTA Name    : A1601EX_11_A.33_170814
Display ID     : A1601EX_11_A.33_170814
Kernel Info    : 3.10.72-G201708142235

MT6750__OPPO__A1601__5.1__A1601EX_11_A.33_170814__LMY47I__oppo6750_15331

Unsupport : 0x0000000000000000 : 0x0000000000040000 : preloader


Error : Device NOT supported for SAVE READ!
Send log and report.log (if exists) to support! Include device info also!

Reconnect Power/Cable!

READ SECURITY SUCCESS :

Code:

Operation : Read Security [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 150100525831424D420747A3E08393E7
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C007F322F06E70A4DF22C5B24A8062B5

DA : USB : FULL-SPEED

Boot done!

SEC Data : 
IMEI[0] : 8636320xxxxxxxx
IMEI[1] : 8636320xxxxxxxx

NVRAM check : Passed!

NVM saved as : MT6755__eMMC__863632036641872.mt_sec
NVM saved to : D:\

Done!
Elapsed: 00:00:16

and no report.log file in CM2MT2 folder

Infinity-BEST · 04-17-2018, 11:33

make sure about fx37.nfo file present.
File MD5 must be similar.
MD5 : 8B92AA278C70147E9F58B27BBD123A6F

rebainoor · 04-17-2018, 11:35

not found this file fx37.nfo

Infinity-BEST · 04-17-2018, 11:40

Quote:

Originally Posted by rebainoor

not found this file fx37.nfo

fx37.nfo ? RGhost ? ?????????????

rebainoor · 04-17-2018, 11:52

I retry again to read firmware with success and down
the first failed report its because battery no chareged (01%) I charged battery in 05 % the read of firmware is successefuly done

Code:

Info  : SW found that same directory already exists! 
To avoid data damage - select another directory or delete old one!

Reconnect Power/Cable!


Operation : Read Firmware [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 150100525831424D420747A3E08393E7
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C007F322F06E70A4DF22C5B24A8062B5

DA : USB : FULL-SPEED

Boot done!

Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.33
SW OTA Version : A1601EX_11.A.33_INT_033_201708142235
SW OTA Name    : A1601EX_11_A.33_170814
Display ID     : A1601EX_11_A.33_170814
Kernel Info    : 3.10.72-G201708142235
Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.33
SW OTA Version : A1601EX_11.A.33_INT_033_201708142235
SW OTA Name    : A1601EX_11_A.33_170814
Display ID     : A1601EX_11_A.33_170814
Kernel Info    : 3.10.72-G201708142235
Patch Level    : LMY47I
Ver. CodeName  : REL
Ver. Release   : 5.1
Sec. Patch     : 2017-08-05
Build Time     : 1502723862
Product Manfct : OPPO
Board Platform : mt6750
Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.33
SW OTA Version : A1601EX_11.A.33_INT_033_201708142235
SW OTA Name    : A1601EX_11_A.33_170814
Display ID     : A1601EX_11_A.33_170814
Kernel Info    : 3.10.72-G201708142235

MT6750__OPPO__A1601__5.1__A1601EX_11_A.33_170814__LMY47I__oppo6750_15331

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 3%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter  : MT6750_Android_scatter.txt
Saved to : F:\MT6750__OPPO__A1601__5.1__A1601EX_11_A.33_170814__LMY47I__oppo6750_15331\

Done!
Elapsed: 00:02:41

and very nice feauter to select scatter and do a custom flash

ponix · 04-20-2018, 22:28

I can flash it with this version or read only ?

rebainoor · 04-20-2018, 22:56

Quote:

Originally Posted by ponix

I can flash it with this version or read only ?

Yes you Can flash it with cm2mt2

.:bono:. · 05-29-2018, 13:30

what did you select i model setting ? there is no f1s in oppo menu, or did you select somethig else ?

MDxavi · 05-29-2018, 13:53

Quote:

Originally Posted by .:bono:.

what did you select i model setting ? there is no f1s in oppo menu, or did you select somethig else ?

use 0_base , v1812 setting

.:bono:. · 05-29-2018, 14:03

Quote:

Originally Posted by MDxavi

use 0_base , v1812 setting

thanks, but did it work with ofiginal firmware, when it prompt me to select scatter, nothing is shown in my file folder !! scater is there.

MDxavi · 05-29-2018, 14:15

Quote:

Originally Posted by .:bono:.

thanks, but did it work with ofiginal firmware, when it prompt me to select scatter, nothing is shown in my file folder !! scater is there.

try again

.:bono:. · 05-29-2018, 14:26

Quote:

Originally Posted by MDxavi

try again

yes scatter must be renamed to " MT6755_Android_scatter.tx t" , thank it is shown now, i'll try if cm2mt2 can revive my f1s cause other tools can't do it.

br

.:bono:. · 05-29-2018, 14:27

Code:

Reconnect Power/Cable!


Operation : Write Flash [ v2.00 r3 ]

Repartition  : Enabled
Flash Verify : Disabled
Pre-Erase    : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :17
[FL] : Set : preloader.bin
[FL] : Set : preloader.bin
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : md1arm7.img
[FL] : Set : md3rom.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : trustzone.bin
[FL] : Set : trustzone.bin
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xCB57804C [ 3,18 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM44)
MODE : BOOTROM
PORT : 44
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6755
     EMI : SRC : preloader_oppo6750_15131.bin
     EMI : CNT : 0009
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG   | DEV : RE1BMB : RAM : [ 3,00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3,00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG   | DEV : RX1BMB : RAM : [ 3,00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 13014E51334A393756 : VEN : UNKNOWN   | DEV : Q3J97V : RAM : [ 3,00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG   | DEV : RX14MB : RAM : [ 4,00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 13014E51334A393757 : VEN : UNKNOWN   | DEV : Q3J97W : RAM : [ 4,00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG   | DEV : RC14MB : RAM : [ 4,00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG   | DEV : RH64MB : RAM : [ 4,00 GB ]
     EMI : [08] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 4,00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...

DA : BOOT 2ND DA FAILED!
ERR : 0xC0070004
ERR : DA_HASH_MISMATCH

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

JayDi · 05-29-2018, 18:13

What initial device state was?

.:bono:. · 05-29-2018, 18:17

Quote:

Originally Posted by JayDi

What initial device state was?

Totaly dead, i full flash it with another file that i found sucsesfully but still dead.

04-17-2018, 11:33	#2 (permalink)
Infinity-BEST Product Supporter Join Date: Jun 2010 Location: Infinity Team support Posts: 606 Member: 1330296 Status: Offline Thanks Meter: 1,137	make sure about fx37.nfo file present. File MD5 must be similar. MD5 : 8B92AA278C70147E9F58B27BBD123A6F

04-17-2018, 11:35	#3 (permalink)
rebainoor No Life Poster Join Date: Feb 2006 Location: In my LAB Posts: 3,162 Member: 231728 Status: Offline Thanks Meter: 2,102	not found this file fx37.nfo

04-20-2018, 22:28	#6 (permalink)
ponix No Life Poster Join Date: Feb 2006 Location: ALGERIA Posts: 984 Member: 229016 Status: Offline Sonork: 100.1590620 Thanks Meter: 130	I can flash it with this version or read only ?

05-29-2018, 13:30	#8 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	what did you select i model setting ? there is no f1s in oppo menu, or did you select somethig else ?

05-29-2018, 18:13	#14 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	What initial device state was?