GSM-Forum - Oppo R831K connecting Problem :(

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - Oppo R831K connecting Problem :( (https://forum.gsmhosting.com/vbb/f296/oppo-r831k-connecting-problem-2010892/)

Oppo R831K connecting Problem :(

Without pressing boot key (vol +) not connecting
asking OPPO Preloader drivers

Code:

USB\VID_22D9&PID_0006&REV_0100

USB\VID_22D9&PID_0006

with Boot key
connect ok

Code:

Operation : Check / Read Info [ v1.36 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 59 ]

Sync...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6572

BB_CPU_HW : CA01

BB_CPU_SW : 8A00

BB_CPU_SB : 0000

BB_CPU_NM : [MediaTek] MT6572_S00

Processing BROM stage

BLVersion : 0xFE

SecCfgVal : 0x00000000

BromVersion : 0x05

BLVersion : 0xFE

Preloader Status : Not active (Erased)

Processing DA stage

DA Select done , sending 

DA Ver : MTK_AllInOne_DA_v7.1533.03

NAND_ID : 00000000000000000000000000000000

eMMC_ID : 90014A4834473164040502A19498812D

DA Stat : v4.2 on BBID : 0x88

DRAM not initialized , configure DRAM Settings

DRAM EmiReq Ok , 0x00A8

DRAM Init Ok , 0x20000000

DA Sent. Configure setting now ... 

DA started successuflly

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0090 , OEM : 014A

[eMMC] : FLASH_INF : d1G4

[eMMC] : FLASH_CID : 90014A4834473164040502A19498812D

[eMMC] : FLASH_EXT : 00400000/00400000

[eMMC] : FLASH_LEN : 0x00000000E9000000

INT RAM    : 0x00020000

EXT RAM    : 0x20000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

[AP] : Initial info read Ok!
 

Brand     : OPPO

ProdName  : OPPO72_14079

ProdModel : R831K

Device    : OPPO72_14079

AndroidVer: 4.2.2

MTKxCPU   : MT6572

MTKxPRJ   : R831K_11_A.13_141029_L
 

Done!

Elapsed: 00:00:11

Reconnect Power/Cable!

Already got report about that. In next (1.37) thwy will be supported in normal preloader as well.

Quote:

Originally Posted by syed tuqeer (Post 11397515)

Without pressing boot key (vol +) not connecting
asking OPPO Preloader drivers

For oppo R831k problem only from driver, just instal driver for it

See this log for that

Code:

Start  at : [07/11/2015 / 12:02:05]

Operation : Read Flash [ v1.36 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 24 ]

Sync...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6572

BB_CPU_HW : CA01

BB_CPU_SW : 8A00

BB_CPU_SB : 0000

BB_CPU_NM : [MediaTek] MT6572_S00

Processing BROM stage

BLVersion : 0xFE

SecCfgVal : 0x00000000

BromVersion : 0x05

BLVersion : 0xFE

Preloader Status : Not active (Erased)

Processing DA stage

DA Select done , sending 

DA Ver : MTK_AllInOne_DA_v7.1533.03

NAND_ID : 00000000000000000000000000000000

eMMC_ID : 90014A483447316404050CA2F138C11F

DA Stat : v4.2 on BBID : 0x88

DRAM not initialized , configure DRAM Settings

DRAM EmiReq Ok , 0x00A8

DRAM Init Ok , 0x20000000

DA Sent. Configure setting now ... 

DA started successuflly

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0090 , OEM : 014A

[eMMC] : FLASH_INF : d1G4

[eMMC] : FLASH_CID : 90014A483447316404050CA2F138C11F

[eMMC] : FLASH_EXT : 00400000/00400000

[eMMC] : FLASH_LEN : 0x00000000E9000000

INT RAM    : 0x00020000

EXT RAM    : 0x20000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

Reading Flash Conent now ... 

USBDL : Init HSUSB Ok!
 

Brand     : OPPO

ProdName  : OPPO72_14079

ProdModel : R831K

Device    : OPPO72_14079

AndroidVer: 4.2.2

MTKxCPU   : MT6572

MTKxPRJ   : R831K_11_A.14_150602
 

[Read Ok] : preloader_oppo72_14079.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : EBR2

[Read Ok] : reserve2.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[Read Ok] : fat.img
 

[ScatCFG] : MT6572 / V1.1.1 / oppo72_14079 / EMMC

FW Size : 939 MiB

Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__OPPO__R831K__OPPO72_14079__4.2.2__R831K_11_A.14_150602\
 

All done!
 

Done!

Elapsed: 00:05:00

Reconnect Power/Cable!
 

Finish at : [07/11/2015 / 12:07:06]

Quote:

Originally Posted by JayDi (Post 11397942)

Already got report about that. In next (1.37) thwy will be supported in normal preloader as well.

On oppo R1011 still not success with this version

Here log

Code:

Start  at : [07/11/2015 / 12:24:38]

Operation : Read Flash [ v1.36 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 14 ]

Sync...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6572

BB_CPU_HW : CA01

BB_CPU_SW : 8A00

BB_CPU_SB : 0000

BB_CPU_NM : [MediaTek] MT6572_S00

Processing BROM stage

BLVersion : 0xFE

SecCfgVal : 0x00000000

BromVersion : 0x05

BLVersion : 0xFE

Preloader Status : Not active (Erased)

Processing DA stage

DA Select done , sending 

DA Ver : MTK_AllInOne_DA_v7.1533.03

NAND_ID : 00000000000000000000000000000000

eMMC_ID : FE014E50314A39344C12DE03336F1255

DA Stat : v4.2 on BBID : 0x88

DRAM not initialized , configure DRAM Settings

DRAM EmiReq Ok , 0x00A8
 

Error : DA init Failed! Error code : 0x5

LErr : EMICFG_NOT_FOUND
 

Boot Error!
 

Operation Failed

Elapsed: 00:00:08

Reconnect Power/Cable!
 

Finish at : [07/11/2015 / 12:24:47]

1. I talk about v1.37, which is not out yet.
2. That "driver" problem is MTK mode, which ignore custom bootloaders. When add "oppo" exactly - it will work even without bootkyes.

oppo r831k imie solve in one click

use miracle 2.40
first use kingo root
usb dubing on
selec media storage
and repair imei ok