orange sydney zte G-N295 DEAD AFTER FLASH
 

COM15 [VCP0] selected
module v4.46
Device: ZTE-N295
Checking data, wait...
Action: write flash NAND
write: Firmware
ZTE-N295_ZTENJ35_GEMINI_10A_PCB01_GPRS_MT6235B_S01.EFS-EE-ORG-P107A20V1_0_5B02.BIN_FLNHYC0UEE0AF2P_3S60E__firmwa re_20111227-151107.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
incorrect ext bootloader signature: 10B502F0
bootloader version: ZTENJ35_GEMINI_10A_BOOTLOADER_V005_MT6235B_EFS-EE-ORG-P107A20V1_
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/01C00000
firmware size: 32Mb
ffs size: 28Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: EFS-EE-ORG-P107A20V1.0.5B02
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
incorrect ext bootloader signature: 10B502F0
bootloader version: ZTENJ35_GEMINI_10A_BOOTLOADER_V005_MT6235B_EFS-EE-ORG-P107A20V1_
nfi area detection (3 cores) finished: Ok
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: ZTENJ35_GEMINI_10A_PCB01_GPRS_MT6235B_S01.EFS-EE-ORG-P107A20V1_0_5B02.BIN_FLNHYC0UEE0AF2P_3S60E
project-id: EFS-EE-ORG-P107A20V1.0.5B02, 00000000
code offset: 00000000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
====================
New firmware found (v.4.13, database date: 22.12.2011):
ZTENJ35_GEMINI_10A_PCB01_GPRS_MT6235B_S01.EFS-EE-ORG-P107A20V1_0_5B02.BIN_FLNHYC0UEE0AF2P_3S60E

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
nfi area detection...
incorrect ext bootloader signature: 10B502F0
bootloader version: ZTENJ35_GEMINI_10A_BOOTLOADER_V005_MT6235B_EFS-EE-ORG-P107A20V1_
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
Disconnect...
done
Finished, time used: 7 min 42 sec
Remove/Install battery now !


PLZ INFININTY SUPPORT GIVE ME A TESTED FLASHING FILE