pin finder in (infinity combo plus) - GSM-Forum

qwertyuiopaszxc · 06-13-2011, 15:29

hello infinity team

i buy anew box combo edition

but i face aproblem whith finder can not find any

pinout <>>>>i try whith cpu 6225 but no result

and show this message

software version: 1.26
platform: MT: MT62xx (autodetect)
cable type: 1x12 (L12C)
mode: Slow
Fast
searching adapter at COM11 (115200)...
too many retries
adapter found, version: 4000
Loading platforms configuration...
Initializing platforms...
Press and HOLD phone Power button now !
pins: 12, plain
power/activation cycles: 1/7
power-off delay: 20
start Rx/Tx: 1/1
detecting pins...
too many retries
too many retries
connection w/adapter lost during set Tx as pin 3
failed to detect pins
time required: 4 sec
too many retries
Trying to Power-On...
too many retries
Power is Off
too many retries

please infinity team slove my problem

or return my box to reselar to replace

thankyou

note(when i conect red waire to mobile the red light in box off )

elhadi110 · 06-13-2011, 20:58

same problem pls help

InfinityHelp · 06-13-2011, 21:01

hello!

please post search log of L3A connector in slow mode.
Do not connect phone!

amn32 · 06-14-2011, 12:25

First of all plz. check phones, shortage and then connect phone to finder.

qwertyuiopaszxc · 06-14-2011, 12:47

Quote:

Originally Posted by InfinityHelp

hello!

please post search log of L3A connector in slow mode.
Do not connect phone!

thankyou infinityhelp

this is alog for l3a

software version: 1.26
platform: MT: MT62xx (autodetect)
cable type: HF 3 pin (L3A)
mode: Slow
Fast
searching adapter at COM11 (115200)...
too many retries
adapter found, version: 4000
Loading platforms configuration...
Initializing platforms...
Press and HOLD phone Power button now !
pins: 3, plain
power/activation cycles: 1/7
power-off delay: 20
start Rx/Tx: 1/1
detecting pins...
failed to detect pins
time required: 4 sec
Trying to Power-On...
Power is On
***************************

qwertyuiopaszxc · 06-14-2011, 12:51

Quote:

Originally Posted by amn32

First of all plz. check phones, shortage and then connect phone to finder.

i check in agood phone just i want to make backup flash file>>>>
pin finder not work and red light in box off when i connect red cable to phone

net.tarik · 06-14-2011, 13:29

Quote:

Originally Posted by qwertyuiopaszxc

i check in agood phone just i want to make backup flash file>>>>
pin finder not work and red light in box off when i connect red cable to phone

Dear i face same problem in my box but i do some tricks.
when dialog box coming press power on button click ok.
and see the little box running its' mean pin-finder search pin-out by cable.
u select 10x1 cable and u see 10 little box appear and one by one color change
now when 3 box go then you keep and press phone power on button.

do it hope helpful.

BR

qwertyuiopaszxc · 06-14-2011, 13:57

Quote:

Originally Posted by net.tarik

Dear i face same problem in my box but i do some tricks.
when dialog box coming press power on button click ok.
and see the little box running its' mean pin-finder search pin-out by cable.
u select 10x1 cable and u see 10 little box appear and one by one color change
now when 3 box go then you keep and press phone power on button.

do it hope helpful.

BR

thankyou but same problem light off when i connect

the red cable to phone

net.tarik · 06-14-2011, 14:30

check volt in pin-finder phone power supply cable when pin-finder active 5+
also check pin-finder phone power supply cable it's sort.

BR

qwertyuiopaszxc · 06-14-2011, 15:17

HELLO IFINITY TEAM

AFTER HARD WORK I FOUND PROBLEM IN THE TOW CABEL

RED AND BLACK (GO TO CONECTOR BATTERY TO PHONE )
I OPEN THE MAIN CABLE AND EXCHANGE Between RED AND BLACK CABEL

AND THE PIN FINDER WORK OK
THIS IS LOG
software version: 1.26
platform: MT: MT62xx (autodetect)
cable type: 1x12 (L12C)
mode: Slow
Fast
searching adapter at COM11 (115200)...
too many retries
adapter found, version: 4000
Loading platforms configuration...
Initializing platforms...
Press and HOLD phone Power button now !
pins: 12, plain
power/activation cycles: 1/7
power-off delay: 20
start Rx/Tx: 1/1
detecting pins...
19200 fixed
CPU: MT6225
result: Rx:7 Tx:6
time required: 39 sec
Trying to Power-On...
Power is On

InfinityHelp · 06-14-2011, 21:17

hello!

sorry for late answer.
Yes, if without phone it gives No errors-
then you must search for problem in power lines.
Measuring output voltage is all what is needed for detecting problem

btcoolmi · 06-18-2011, 00:42

PLEASE IT IS LONG TIME AGO I HAVE COMBO BOX BUT NEVER I UNLOCK CHINESS PHONE OR RESET CODE? PINFINDER NO WORK, can HELP ME?

InfinityHelp · 06-22-2011, 15:47

Quote:

Originally Posted by btcoolmi

PLEASE IT IS LONG TIME AGO I HAVE COMBO BOX BUT NEVER I UNLOCK CHINESS PHONE OR RESET CODE? PINFINDER NO WORK, can HELP ME?

hello!

sure, we can help. please follow pinfinder user manual step by step.
let us know at what point you get problem, show us pinfinder log

btcoolmi · 07-05-2011, 10:59

HOW I CAN WORK WITH THIS PINFINDER?????? I PAY 1YEAR AGO BUT NOTHING WORK AND DETECT PIN EVERY TIME THE RESULT FOLLOW:

software version: 1.26
platform: MT: MT62xx (autodetect)
cable type: 1x5 (L5A)
mode: Slow
Fast
searching adapter at COM16 (115200)...
too many retries
adapter found, version: 4000
Loading platforms configuration...
Initializing platforms...
Press and HOLD phone Power button now !
pins: 5, plain
power/activation cycles: 1/7
power-off delay: 20
start Rx/Tx: 1/1
detecting pins...
failed to detect pins
time required: 13 sec
Trying to Power-On...
Power is On
PLEASE TEAM CAN TO YOU TELL ME EXALTLY WHAT ABOUT PINFINDER BECAUSE NO WORK????? i have many password for chiness phone 2sim but nothing nothing work??????

InfinityHelp · 07-05-2011, 21:27

hello!

5 pin phones usually have test points.
In 50% of cases no tx/rx in system connector

06-13-2011, 15:29	#1 (permalink)
qwertyuiopaszxc Crazy Poster Join Date: Aug 2008 Posts: 58 Member: 848758 Status: Offline Thanks Meter: 11	pin finder in (infinity combo plus) hello infinity team i buy anew box combo edition but i face aproblem whith finder can not find any pinout <>>>>i try whith cpu 6225 but no result and show this message software version: 1.26 platform: MT: MT62xx (autodetect) cable type: 1x12 (L12C) mode: Slow Fast searching adapter at COM11 (115200)... too many retries adapter found, version: 4000 Loading platforms configuration... Initializing platforms... Press and HOLD phone Power button now ! pins: 12, plain power/activation cycles: 1/7 power-off delay: 20 start Rx/Tx: 1/1 detecting pins... too many retries too many retries connection w/adapter lost during set Tx as pin 3 failed to detect pins time required: 4 sec too many retries Trying to Power-On... too many retries Power is Off too many retries please infinity team slove my problem or return my box to reselar to replace thankyou note(when i conect red waire to mobile the red light in box off )

06-14-2011, 15:17	#10 (permalink)
qwertyuiopaszxc Crazy Poster Join Date: Aug 2008 Posts: 58 Member: 848758 Status: Offline Thanks Meter: 11	My problem sloved HELLO IFINITY TEAM AFTER HARD WORK I FOUND PROBLEM IN THE TOW CABEL RED AND BLACK (GO TO CONECTOR BATTERY TO PHONE ) I OPEN THE MAIN CABLE AND EXCHANGE Between RED AND BLACK CABEL AND THE PIN FINDER WORK OK THIS IS LOG software version: 1.26 platform: MT: MT62xx (autodetect) cable type: 1x12 (L12C) mode: Slow Fast searching adapter at COM11 (115200)... too many retries adapter found, version: 4000 Loading platforms configuration... Initializing platforms... Press and HOLD phone Power button now ! pins: 12, plain power/activation cycles: 1/7 power-off delay: 20 start Rx/Tx: 1/1 detecting pins... 19200 fixed CPU: MT6225 result: Rx:7 Tx:6 time required: 39 sec Trying to Power-On... Power is On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
PIC for lock 2 What pin for clock ???	ondenuove	Nokia Hardware & Hardware Repair	5	10-28-1999 08:49
New menu item in 5110	GeoMan	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	09-23-1999 20:24
Lock 2 in nokia 51xx/61xx	Pablo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-31-1999 04:35

06-13-2011, 20:58	#2 (permalink)
elhadi110 Temporary banned !! Join Date: Jul 2007 Posts: 158 Member: 555091 Status: Offline Thanks Meter: 10	same problem pls help

06-13-2011, 21:01	#3 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! please post search log of L3A connector in slow mode. Do not connect phone!

06-14-2011, 12:25	#4 (permalink)
amn32 No Life Poster Join Date: Aug 2007 Location: Under Blue Posts: 5,080 Member: 569925 Status: Offline Sonork: 100.1624057 Thanks Meter: 6,313	First of all plz. check phones, shortage and then connect phone to finder.

06-14-2011, 14:30	#9 (permalink)
net.tarik No Life Poster Join Date: Jun 2010 Location: Green Forest Posts: 1,125 Member: 1316000 Status: Offline Sonork: 100.1624093 Thanks Meter: 348	check volt in pin-finder phone power supply cable when pin-finder active 5+ also check pin-finder phone power supply cable it's sort. BR

06-14-2011, 21:17	#11 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! sorry for late answer. Yes, if without phone it gives No errors- then you must search for problem in power lines. Measuring output voltage is all what is needed for detecting problem

06-18-2011, 00:42	#12 (permalink)
btcoolmi Insane Poster Join Date: Jan 2010 Location: PARIS Posts: 91 Member: 1216581 Status: Offline Sonork: btcoolmi Thanks Meter: 3	PLEASE IT IS LONG TIME AGO I HAVE COMBO BOX BUT NEVER I UNLOCK CHINESS PHONE OR RESET CODE? PINFINDER NO WORK, can HELP ME?

07-05-2011, 10:59	#14 (permalink)
btcoolmi Insane Poster Join Date: Jan 2010 Location: PARIS Posts: 91 Member: 1216581 Status: Offline Sonork: btcoolmi Thanks Meter: 3	HOW I CAN WORK WITH THIS PINFINDER?????? I PAY 1YEAR AGO BUT NOTHING WORK AND DETECT PIN EVERY TIME THE RESULT FOLLOW: software version: 1.26 platform: MT: MT62xx (autodetect) cable type: 1x5 (L5A) mode: Slow Fast searching adapter at COM16 (115200)... too many retries adapter found, version: 4000 Loading platforms configuration... Initializing platforms... Press and HOLD phone Power button now ! pins: 5, plain power/activation cycles: 1/7 power-off delay: 20 start Rx/Tx: 1/1 detecting pins... failed to detect pins time required: 13 sec Trying to Power-On... Power is On PLEASE TEAM CAN TO YOU TELL ME EXALTLY WHAT ABOUT PINFINDER BECAUSE NO WORK????? i have many password for chiness phone 2sim but nothing nothing work??????

07-05-2011, 21:27	#15 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! 5 pin phones usually have test points. In 50% of cases no tx/rx in system connector