pinout anycool d66 - GSM-Forum

hassan1975 · 07-15-2007, 21:27

hello
this is pinout for anycool d66

keyboard up
___________________________
1------------------18
1 7 9
gnd tx rx

B.R.
MOBITEC

GSM-HELP · 07-27-2007, 21:43

are u test this before post friend in my hand this mobile i try many time no counct

GSM-HELP · 07-27-2007, 22:03

COM1 [Serial0] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
error: initialization3 failed: FE
error: initialization2 failed: F0
error: initialization2 failed: F0
error: initialization3 failed: C1
error: initialization3 failed: FF
19200
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
In case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now !

matin-gsm · 09-04-2007, 10:50

i got this error too .
if pinout is correct so whats the problem ????

bahsar333 · 09-04-2007, 11:18

(((((((what solved this problem)))

COM1 [Serial0] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
error: initialization3 failed: FE
error: initialization2 failed: F0
error: initialization2 failed: F0
error: initialization3 failed: C1
error: initialization3 failed: FF
19200
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
In case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now !

matin-gsm · 09-04-2007, 11:47

hellooooo
are you there infinity ?

zinoubinabil · 09-04-2007, 11:47

pinout is correct; try to change rx with tx
keyboard top
1.........18
1: Gnd
2: Gnd
7: Tx
9: Rx

matin-gsm · 09-04-2007, 14:01

thanx .

COM30 [VCP0] selected
Device: Autodetect: 6205-6227, 6228
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
New firmware detected: E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification data Ok
identification data backup saved: id.2B8B1ECB.[E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN_7067 21D5].rpl
identification detection finished
device-id: 2B8B1ECB
protocol ver: 04
ver. sw1: E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN
ver. sw2: E553_K7SMCHARAB.01.1
ffs offset/size: 00800000/001FF000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
reading [eeprom[E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]]...
file saved: backup_eeprom[E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]_20070731-153412.B0E.bin
flash: EC257E25082501:29EA0000000000
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: EC257E25082501:29EA0000000000
Write Done
file saved: backup_system_log_2B8B1ECB_E553_K7SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_706721D5_20070731-153429.B0X.bin
Finished, time used: 186 sec
Remove/Install battery now !

**InfinitySupport** · 09-04-2007, 14:07

Hello,

New firmware detected: E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support: backup_system_log_2B8B1ECB_E553_K7SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_706721D5_20070731-153429.B0X.bin
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)

matin-gsm · 09-04-2007, 14:16

fone work good . i have to do all you said ?

**InfinitySupport** · 09-04-2007, 14:28

Yes, please, send me file: backup_system_log_2B8B1ECB_E553_K7SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_706721D5_20070731-153429.B0X.bin

[email protected]

07-15-2007, 21:27	#1 (permalink)
hassan1975 No Life Poster Join Date: May 2003 Posts: 1,312 Member: 28819 Status: Offline Thanks Meter: 222	pinout anycool d66 hello this is pinout for anycool d66 keyboard up ___________________________ 1------------------18 1 7 9 gnd tx rx B.R. MOBITEC

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need Anycool D66+ pinout	ramziii	Infinity-Box	6	06-25-2008 13:25
Anycool D66 Plus USB Cable pinout	surfman	HTC & PDA WM( With Touchscreen)	2	10-31-2007 20:42
Now, Anycool D66 Firmware in the site firmware section	pleomax2212	Infinity-Box	0	08-22-2007 02:42
Anycool D66	pleomax2212	Infinity-Box	5	08-17-2007 09:46
Anycool D66	pleomax2212	Infinity-Box	7	08-14-2007 18:36

07-27-2007, 21:43	#2 (permalink)
GSM-HELP Freak Poster Join Date: Sep 2005 Location: CHINA-KUWIT-CHINA Age: 48 Posts: 232 Member: 179551 Status: Offline Thanks Meter: 7	are u test this before post friend in my hand this mobile i try many time no counct

07-27-2007, 22:03	#3 (permalink)
GSM-HELP Freak Poster Join Date: Sep 2005 Location: CHINA-KUWIT-CHINA Age: 48 Posts: 232 Member: 179551 Status: Offline Thanks Meter: 7	COM1 [Serial0] selected Device: Autodetect Checking data, wait... advanced flash detection active Action: reset Boot... Press and HOLD Power button now ! baud autodetection active error: initialization3 failed: FE error: initialization2 failed: F0 error: initialization2 failed: F0 error: initialization3 failed: C1 error: initialization3 failed: FF 19200 Connecting, wait... error: boot phase#1 failed Release Power button now ! In case of initial connection problem: on/off "Boot baudrate autoselect" box. Boot Fail Finished, time used: 4 sec Remove/Install battery now !

09-04-2007, 10:50	#4 (permalink)
matin-gsm No Life Poster Join Date: Feb 2007 Location: T.me/unlockarena Posts: 1,658 Member: 446040 Status: Offline Thanks Meter: 1,065	i got this error too . if pinout is correct so whats the problem ????

09-04-2007, 11:18	#5 (permalink)
bahsar333 Freak Poster Join Date: Mar 2005 Location: uae Age: 35 Posts: 178 Member: 129149 Status: Offline Sonork: 100.1638990 Thanks Meter: 20	(((((((what solved this problem))) COM1 [Serial0] selected Device: Autodetect Checking data, wait... advanced flash detection active Action: reset Boot... Press and HOLD Power button now ! baud autodetection active error: initialization3 failed: FE error: initialization2 failed: F0 error: initialization2 failed: F0 error: initialization3 failed: C1 error: initialization3 failed: FF 19200 Connecting, wait... error: boot phase#1 failed Release Power button now ! In case of initial connection problem: on/off "Boot baudrate autoselect" box. Boot Fail Finished, time used: 4 sec Remove/Install battery now !

09-04-2007, 11:47	#6 (permalink)
matin-gsm No Life Poster Join Date: Feb 2007 Location: T.me/unlockarena Posts: 1,658 Member: 446040 Status: Offline Thanks Meter: 1,065	hellooooo are you there infinity ?

09-04-2007, 11:47	#7 (permalink)
zinoubinabil Product Supporter Join Date: Sep 2004 Location: In the right way Posts: 2,748 Member: 84268 Status: Offline Sonork: 100.114149 Thanks Meter: 2,569	pinout is correct; try to change rx with tx keyboard top 1.........18 1: Gnd 2: Gnd 7: Tx 9: Rx

09-04-2007, 14:01	#8 (permalink)
matin-gsm No Life Poster Join Date: Feb 2007 Location: T.me/unlockarena Posts: 1,658 Member: 446040 Status: Offline Thanks Meter: 1,065	thanx . COM30 [VCP0] selected Device: Autodetect: 6205-6227, 6228 Checking data, wait... advanced flash detection active Action: reset Boot... Press and HOLD Power button now ! baud autodetection active 19200 Connecting, wait... Initializing[6226:8A02:8A01]... high speed disabled boot step size: 0002 Release Power button now ! Boot Done Initialize... detecting chip #00 in region #00... flash: EC257E25082501:29EA0000000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb number of flash chip/regions detected: 01/01 Initialize Done Set baud... 921600 Set baud Done Check space... device parameters autodetection in progress.. detecting chip #00 in region #00... flash: EC257E25082501:29EA0000000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb number of flash chip/regions detected: 01/01 total flash region size: 01000000 detect device identification, method #1... detection phase #1... detect device parameters finished structure: 2nd [enhanced] (or higher) generation New firmware detected: E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN - make "Read detailed information, ask/rpl" operation - send "backup_system_log_..." file to support - make "Read full flash" operation - send flash backup file(s) to support - include in your e-mail full text from phone back label (phone name etc.) identification data Ok identification data backup saved: id.2B8B1ECB.[E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN_7067 21D5].rpl identification detection finished device-id: 2B8B1ECB protocol ver: 04 ver. sw1: E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN ver. sw2: E553_K7SMCHARAB.01.1 ffs offset/size: 00800000/001FF000 detecting eeprom area in 1 chip(s)... flash: EC257E25082501:29EA0000000000 checking area[00000000]: 00000000-00FFFFFF... eeprom found near: 00E00000 detecting eeprom size... eeprom size: 00200000 eeprom chip: 00 eeprom area detected[00000000]: 00E00000-00FFFFFF reading [eeprom[E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]]... file saved: backup_eeprom[E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]_20070731-153412.B0E.bin flash: EC257E25082501:29EA0000000000 Check space Done Manipulation... Manipulation Done Finalization... Finalization Done Write... formatting... flash: EC257E25082501:29EA0000000000 Write Done file saved: backup_system_log_2B8B1ECB_E553_K7SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_706721D5_20070731-153429.B0X.bin Finished, time used: 186 sec Remove/Install battery now !

09-04-2007, 14:07	#9 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, New firmware detected: E553_K7SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN - make "Read detailed information, ask/rpl" operation - send "backup_system_log_..." file to support: backup_system_log_2B8B1ECB_E553_K7SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_706721D5_20070731-153429.B0X.bin - make "Read full flash" operation - send flash backup file(s) to support - include in your e-mail full text from phone back label (phone name etc.)

09-04-2007, 14:16	#10 (permalink)
matin-gsm No Life Poster Join Date: Feb 2007 Location: T.me/unlockarena Posts: 1,658 Member: 446040 Status: Offline Thanks Meter: 1,065	fone work good . i have to do all you said ?

09-04-2007, 14:28	#11 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Yes, please, send me file: backup_system_log_2B8B1ECB_E553_K7SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_706721D5_20070731-153429.B0X.bin [email protected]