GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 10-13-2007, 14:47   #1 (permalink)
No Life Poster
 
Join Date: Oct 2006
Posts: 816
Member: 368923
Status: Online
Thanks Meter: 78
pinouts for sands a203


hi ,
infinity-team pls provide me the pinouts for sands a203 .the connector is of 20 pins like samsung d90 .3,7,19=gnd. 20 = vcc. rx = ? and tx = ?.
  Reply With Quote
Old 10-13-2007, 14:54   #2 (permalink)
Product Supporter
 
Join Date: May 2005
Posts: 25,250
Member: 148515
Status: Offline
Thanks Meter: 15,713
hello!

this was discussed many times, please before posting use search button in this forum

3, 7, 19 - GND
20 - Vcc
9 - RX
13 - TX
  Reply With Quote
Old 10-13-2007, 14:57   #3 (permalink)
Freak Poster
 
alex12's Avatar
 
Join Date: Jul 2005
Posts: 352
Member: 163678
Status: Offline
Sonork: 57856848
Thanks Meter: 15
pinouts for sands 908
hi ,
infinity-team pls help.......................
  Reply With Quote
Old 10-13-2007, 16:41   #4 (permalink)
No Life Poster
 
Join Date: Oct 2006
Posts: 816
Member: 368923
Status: Online
Thanks Meter: 78
Dear infinity-team , these pinouts dont work at all. i have already tried them.
  Reply With Quote
Old 10-14-2007, 13:02   #5 (permalink)
No Life Poster
 
Join Date: Jul 2001
Location: Spinning on my OWN Orbit
Posts: 968
Member: 5358
Status: Offline
Thanks Meter: 211
try it and discover the tricks hehehe its all working but the processor is very fast but as ive said there is a trick got it!
  Reply With Quote
Old 10-15-2007, 14:03   #6 (permalink)
Product Supporter
 
Join Date: May 2005
Posts: 25,250
Member: 148515
Status: Offline
Thanks Meter: 15,713
hello sunnny!

try to swap with places tx and rx
  Reply With Quote
Old 10-15-2007, 19:16   #7 (permalink)
Freak Poster
 
bhuvanele's Avatar
 
Join Date: Feb 2006
Location: India
Posts: 457
Member: 237210
Status: Offline
Thanks Meter: 89
for me pin no12 and 13 worked fine. hope this will help. same pins can be found in between two sim trays
  Reply With Quote
Old 11-11-2007, 14:16   #8 (permalink)
Insane Poster
 
Join Date: Jul 2004
Location: BATAM
Posts: 70
Member: 75077
Status: Offline
Thanks Meter: 11
This is log formating HP SANDS A203

COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.06F5CB29.[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN_BA092E9B].rpl
New firmware detected: TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 06F5CB29
protocol ver: 04
ver. sw1: TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN
ver. sw2: MAUI.05C.W06.16.MP.V28
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 98004900000002:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN]_20071111-192804.B0E.bin
flash: 98004900000002:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 98004900000002:29EA0000000000
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _06F5CB29_TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_ 05C_W06_16_MP_V28.BIN_BA092E9B_20071111-192820.B0X.bin
Finished, time used: 173 sec
Remove/Install battery now !
  Reply With Quote
Old 11-11-2007, 16:42   #9 (permalink)
Freak Poster
 
Join Date: Oct 2003
Location: UK
Posts: 220
Member: 42408
Status: Offline
Thanks Meter: 6
Quote:
Originally Posted by starcomcell View Post
This is log formating HP SANDS A203

COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.06F5CB29.[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN_BA092E9B].rpl
New firmware detected: TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 06F5CB29
protocol ver: 04
ver. sw1: TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN
ver. sw2: MAUI.05C.W06.16.MP.V28
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 98004900000002:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN]_20071111-192804.B0E.bin
flash: 98004900000002:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 98004900000002:29EA0000000000
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _06F5CB29_TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_ 05C_W06_16_MP_V28.BIN_BA092E9B_20071111-192820.B0X.bin
Finished, time used: 173 sec
Remove/Install battery now !

good job bro....

keep try and sent for us the successful log confirm.

thanks
  Reply With Quote
Old 11-11-2007, 18:00   #10 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,921
Member: 130995
Status: Offline
Thanks Meter: 34,397
Quote:
Originally Posted by starcomcell View Post
This is log formating HP SANDS A203

COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.06F5CB29.[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN_BA092E9B].rpl
New firmware detected: TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 06F5CB29
protocol ver: 04
ver. sw1: TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN
ver. sw2: MAUI.05C.W06.16.MP.V28
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 98004900000002:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16 _MP_V28.BIN]_20071111-192804.B0E.bin
flash: 98004900000002:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 98004900000002:29EA0000000000
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _06F5CB29_TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_ 05C_W06_16_MP_V28.BIN_BA092E9B_20071111-192820.B0X.bin
Finished, time used: 173 sec
Remove/Install battery now !

Hello,

Please, send file
backup_system_log _06F5CB29_TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_ 05C_W06_16_MP_V28.BIN_BA092E9B_20071111-192820.B0X.bin

to [email protected]
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
pinouts for sands A203 sunnny Infinity-Box 42 11-05-2008 07:03
NEEDED Sands A203 pinouts kasim Infinity-Box 1 09-27-2007 14:37
need pinout for sands A203 ashok_kumar459 Infinity-Box 3 09-24-2007 07:06
sands a203 pinout????????? edy2002gha Infinity-Box 3 09-12-2007 22:16
plz help me pinout for SANDS A203???? black snake Infinity-Box 9 09-11-2007 11:01

 



All times are GMT +1. The time now is 06:25.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.34892 seconds with 8 queries

SEO by vBSEO