please help - GSM-Forum

fraz12345 · 07-01-2009, 08:47

at this moment i have china 1112 set.

fault no signal

i have formate or flash so many china 1112 sets

but this time its not boot
when i connect cable infinity say power press the set is on
not booted

set receive signals but cant register on any network
please help

fraz12345 · 07-01-2009, 11:56

i have just 24 hours
please help
please give some ideas

fraz12345 · 07-01-2009, 11:58

i have just 24 hours
please help
please give some ideas

**InfinitySupport** · 07-01-2009, 20:40

Hello,

If you can make 112 call but phone can not work with sim card you need to repair phone imei.

If phone can not connected with software it's for sure cable fault, you must double check Rx/Tx/Gnd wires.

fraz12345 · 07-02-2009, 06:37

i will try
and give report

fraz12345 · 07-02-2009, 06:45

yes its makes 112 call

one little question

have china 1112 some different pin outs

or same which give

ayazbazme · 07-02-2009, 23:40

Try to find rx.tx bu multimeter and then connect it through test point.

InfinityHelp · 07-03-2009, 21:40

hello!

yes, i agree with mr. ayazbazme!
find pinout and checnge phone IMEI to valid value

07-01-2009, 08:47	#1 (permalink)
fraz12345 Freak Poster Join Date: Jun 2007 Location: pirmahal pakistan Posts: 386 Member: 529953 Status: Offline Sonork: 100.1605485 Thanks Meter: 46	please help at this moment i have china 1112 set. fault no signal i have formate or flash so many china 1112 sets but this time its not boot when i connect cable infinity say power press the set is on not booted set receive signals but cant register on any network please help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HOW TO unlock SE v600i ??please help	xiongfuchen	SETool2	15	05-21-2013 08:10
please help me to unlock N97 [ANSWERED]	longgiang81	Genie Universal	2	03-30-2010 09:18
6210n unlock please help me please	AVCITHETCNC	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	2	03-29-2010 18:21
PLEASE HELP FOR U10i	delwar_us	Sony Ericsson	3	03-29-2010 16:13

07-01-2009, 11:56	#2 (permalink)
fraz12345 Freak Poster Join Date: Jun 2007 Location: pirmahal pakistan Posts: 386 Member: 529953 Status: Offline Sonork: 100.1605485 Thanks Meter: 46	i have just 24 hours please help please give some ideas

07-01-2009, 11:58	#3 (permalink)
fraz12345 Freak Poster Join Date: Jun 2007 Location: pirmahal pakistan Posts: 386 Member: 529953 Status: Offline Sonork: 100.1605485 Thanks Meter: 46	i have just 24 hours please help please give some ideas

07-01-2009, 20:40	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, If you can make 112 call but phone can not work with sim card you need to repair phone imei. If phone can not connected with software it's for sure cable fault, you must double check Rx/Tx/Gnd wires.

07-02-2009, 06:37	#5 (permalink)
fraz12345 Freak Poster Join Date: Jun 2007 Location: pirmahal pakistan Posts: 386 Member: 529953 Status: Offline Sonork: 100.1605485 Thanks Meter: 46	i will try and give report

07-02-2009, 06:45	#6 (permalink)
fraz12345 Freak Poster Join Date: Jun 2007 Location: pirmahal pakistan Posts: 386 Member: 529953 Status: Offline Sonork: 100.1605485 Thanks Meter: 46	yes its makes 112 call one little question have china 1112 some different pin outs or same which give

07-02-2009, 23:40	#7 (permalink)
ayazbazme Freak Poster Join Date: Jun 2008 Location: Karachi Age: 34 Posts: 309 Member: 788720 Status: Offline Sonork: 100.1617957 Thanks Meter: 33	Try to find rx.tx bu multimeter and then connect it through test point.

07-03-2009, 21:40	#8 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! yes, i agree with mr. ayazbazme! find pinout and checnge phone IMEI to valid value