please help alcatel c700a - GSM-Forum

enanopeludo · 06-22-2008, 05:13

I have tried in every possible way cmunicar with the telephone box to make the first step in the manual is to make a complete copy, but I have not been lucky I appeal to your help I can guide.
Then heat the operations carried out with three different phones, including one by not encindia software problem, the second for new release, and the third is hanging on the home screen.

thanks for your time

**InfinitySupport** · 06-23-2008, 11:01

Hello,

To make phone well connected with software you need to press and HOLD phone power button during boot process.
Please, follow this advice and you will be able to connect phone.

enanopeludo · 06-23-2008, 14:15

I have done what you told me with three different phones pulsation of long power cuts and also pulsation. But it is rare that on three different phones does the same. It also tells me that you can not go into test mode that may be due to a failure of the cable connection but this soldier directly on the plate, and the second sheet RJ45 armed photography, I used source stabilized according to the values of battery and also either the original battery charged.

**InfinitySupport** · 06-23-2008, 14:50

It is not a cable problem due to phone can be detected by software.
pls, tryt o repeat operation again and press and HOLD phone "power" button during boot process.

enanopeludo · 06-23-2008, 16:11

I really like what you say but in certain occasions during the rare characters inicializacion shows about 20 lines of code, I have tried several ways but it is impossible to connect I have spent several hours trying and several days. and if you press the ignition when they sought. No longer do that more.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Please help alcatel s203a-303a	pastuso	Infinity-Box	0	10-19-2009 22:02
Please help !!! Alcatel s621x dead.urgent	mobile_juice	Infinity-Box	1	04-03-2009 17:47
please help alcatel e205 c62	stranger55	Alcatel TCL Phones and New Models	1	09-03-2007 13:04
Please Help Alcatel Ote 259 Code Request Have Odered Fbgold But Hasnt Arrived	nokia_dan	FuriousGold	2	06-18-2006 21:28
Please HELP !!!! Alcatel Software for English Language Support...	meetu	Alcatel & TCL Old Models	0	08-11-2002 11:46

06-23-2008, 11:01	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, To make phone well connected with software you need to press and HOLD phone power button during boot process. Please, follow this advice and you will be able to connect phone.

06-23-2008, 14:15	#3 (permalink)
enanopeludo Freak Poster Join Date: Oct 2006 Posts: 201 Member: 366557 Status: Offline Thanks Meter: 12	I have done what you told me with three different phones pulsation of long power cuts and also pulsation. But it is rare that on three different phones does the same. It also tells me that you can not go into test mode that may be due to a failure of the cable connection but this soldier directly on the plate, and the second sheet RJ45 armed photography, I used source stabilized according to the values of battery and also either the original battery charged.

06-23-2008, 14:50	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	It is not a cable problem due to phone can be detected by software. pls, tryt o repeat operation again and press and HOLD phone "power" button during boot process.

06-23-2008, 16:11	#5 (permalink)
enanopeludo Freak Poster Join Date: Oct 2006 Posts: 201 Member: 366557 Status: Offline Thanks Meter: 12	I really like what you say but in certain occasions during the rare characters inicializacion shows about 20 lines of code, I have tried several ways but it is impossible to connect I have spent several hours trying and several days. and if you press the ignition when they sought. No longer do that more.