Please Help Me JayDi Boss - GSM-Forum

A.G.Shahid · 07-31-2017, 14:49

I Have Qmobile M95 SPD 7731 Ver1

Problem unfortunately stop err

i Select All Mode Generic 4.x-5.0 Set mode to : SP SC773x eMMC Android 5.x

Set mode to : SP SC773x eMMC [Android 6.x Show This Err

Please Help Me

Quote:

Infinity SC Firmware Detected
FW Size : 1239 MiB
Load Ok!

Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !

PMTManager : Load 0x17 records
PMTManager : PMT Update Failed!!!
Selected firmware doesn't match to current HW or EMPTY battery!
Flashing terminated!

Elapsed: 00:00:02

Reconnect Power/Cable!

naveedullah0044 · 07-31-2017, 15:56

M-95 FLASHING ERR HELP ME -

Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : M95 v1 by Nasir Mobiles.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : M95 v1 by Nasir Mobiles
File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731g_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
File : logo_540x960.bin
File : fblogo_540x960.bin
File : boot.img
File : system.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : PMT Update skipped by user!
Flashing now

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Error with code 0x00037E00960000FF697E

Elapsed: 00:00:00

Reconnect Power/Cable!-

A.G.Shahid · 08-01-2017, 06:41

@JayDi Boss

Really I Need Your Help

Br
Shahid

JayDi · 08-01-2017, 06:48

There is hundred thread about M95/M96, use search. Explained all possible variants.

07-31-2017, 15:56	#2 (permalink)
naveedullah0044 No Life Poster Join Date: Mar 2011 Location: PAKISTAN Posts: 835 Member: 1537135 Status: Offline Thanks Meter: 1,021	M-95 FLASHING ERR HELP ME - Operation : Flash [ v1.27 ] ======= Flash Files set for flashing : [ MCU ] : M95 v1 by Nasir Mobiles.pac CRVersion : BP_R1.0.0 PacCPUinfo : SC77xx PacVersion : M95 v1 by Nasir Mobiles File : Infinity_fdl1.bin File : Infinity_fdl2.bin File : nvitem_w.bin File : nvitem_wcn.bin File : prodnv.img File : u-boot-spl-16k.bin File : sc7731g_CP0_modem.bin File : DSP_DM_Gx.bin File : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin File : logo_540x960.bin File : fblogo_540x960.bin File : boot.img File : system.img File : cache.img File : recovery.img File : userdata.img File : u-boot.bin 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 30 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! PMTManager : PMT Update skipped by user! Flashing now [FlashProc] : CODE Current ID : PRODNV Current File : prodnv.img Flashing now ... [FlashProc] : Error with code 0x00037E00960000FF697E Elapsed: 00:00:00 Reconnect Power/Cable!-

08-01-2017, 06:41	#3 (permalink)
A.G.Shahid No Life Poster Join Date: Nov 2016 Location: ISI Posts: 5,792 Member: 2644066 Status: Offline Thanks Meter: 1,773	@JayDi Boss Really I Need Your Help Br Shahid

08-01-2017, 06:48	#4 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	There is hundred thread about M95/M96, use search. Explained all possible variants.