pless help my unlock huawei g6600
 

COM5 [VCP0] selected
module v3.96
Action: read unlock codes
unlock method: read codes
Model: Huawei-G6600_128mb
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
high speed boot On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: E5.2AV01V01.04
Version: BYD35_09A_PMWY_HW
====================
New firmware found (v.3.96, database date: 21.06.2011):
E5.2AV01V01.04

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
88 byte(s) read
imei: 00000000000000
connection Ok
195 byte(s) read
reading data #2...
reading data #3...
reading data #4...
reading data #5...
0 byte(s) read
183 byte(s) read
reading data...
reading data #2...
reading data #3...
0 byte(s) read
warning: communication fault
error: operation failed !
Finished, time used: 24 sec
Remove/Install battery now !

Did you checked support area for information about your phone hardware ?

Do you have G6600-64mb phone or G6600-128mb phone ?

Hi I have a huawei G6600-128mb and cannot unlock it

imei: 00000000000000
connection Ok
195 byte(s) read
reading data #2...
reading data #3...
reading data #4...
reading data #5...
0 byte(s) read
183 byte(s) read
reading data...
reading data #2...
reading data #3...
0 byte(s) read
warning: communication fault
error: operation failed !
Finished, time used: 24 sec
Remove/Install battery now !

Unlock done. Something was going wrong but then I tried again and again 'till i got it unlocked ;-)

Thanks for test report !

hi doing man?
are you have solution for unlock this phones huawei g6600
mei: 00000000000000
connection Ok
195 byte(s) read
reading data #2...
reading data #3...
reading data #4...
reading data #5...
0 byte(s) read
183 byte(s) read
reading data...
reading data #2...
reading data #3...
0 byte(s) read
warning: communication fault
error: operation failed !
Finished, time used: 52 sec
Remove/Install battery now !
please im witing for your helppppp thx

thread: pless help my unlock huawei g6600 Reply to Thread