plz help me about tech screen failt - GSM-Forum

hussainafridi · 03-09-2009, 12:34

I have china mobile which is not working its tech screen.so i have tried by infinity but give me this eorr. i have used all mode . but not don.

plz help me about this.
------------------
LOG
COM7 [VCP0] selected
module v2.78
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:A341:351C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: TWIN_6226_212_UI2_BYD7787_070730
Version: TWIN_6226
detecting structure #2...
0 done
44 byte(s) read
imei: 35010000111122
connection Ok
detecting structure #5 (mode-1)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 45 sec
Remove/Install battery now !
--------------------

hussainafridi · 03-09-2009, 16:19

help me....................

InfinityN · 03-09-2009, 21:02

Quote:

Originally Posted by hussainafridi

I have china mobile which is not working its tech screen.so i have tried by infinity but give me this eorr. i have used all mode . but not don.

plz help me about this.
------------------
LOG
COM7 [VCP0] selected
module v2.78
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:A341:351C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: TWIN_6226_212_UI2_BYD7787_070730
Version: TWIN_6226
detecting structure #2...
0 done
44 byte(s) read
imei: 35010000111122
connection Ok
detecting structure #5 (mode-1)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 45 sec
Remove/Install battery now !
--------------------

Did you tried to read text in your own message ?

hussainafridi · 03-11-2009, 14:19

All flash file or only info of the flash fille send to suport.

plz help me about this, i m new user.

hussainafridi · 03-11-2009, 15:49

here is my full readed flash file here

InfinityHelp · 03-11-2009, 22:42

hello!

we will check you file, it is downloaded

hussainafridi · 03-12-2009, 05:59

Thanks infinity helper. we are waiting for ur good news.

hussainafridi · 03-13-2009, 06:43

more we will wait ?........

hussainafridi · 03-13-2009, 10:07

how much more time waiting.

hussainafridi · 03-13-2009, 13:10

Not solve my problem.

**InfinitySupport** · 03-14-2009, 15:02

You will be waiting until new "ChineseMiracle" will be released due to we add new features in "ChineseMiracle" update.

When it will be ready ?
It will be ready soon.

gsm5378 · 03-14-2009, 15:37

Quote:

Originally Posted by hussainafridi

I have china mobile which is not working its tech screen.so i have tried by infinity but give me this eorr. i have used all mode . but not don.

plz help me about this.
------------------
LOG
COM7 [VCP0] selected
module v2.78
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:A341:351C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: TWIN_6226_212_UI2_BYD7787_070730
Version: TWIN_6226
detecting structure #2...
0 done
44 byte(s) read
imei: 35010000111122
connection Ok
detecting structure #5 (mode-1)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 45 sec
Remove/Install battery now !
--------------------

bro try on mod1 if not then try mod2 . then try flash other wise u r in trouble

hussainafridi · 03-16-2009, 12:17

i have tried all mode but not solve my problem.

InfinityHelp · 03-16-2009, 22:42

Quote:

Originally Posted by hussainafridi

i have tried all mode but not solve my problem.

hello!

read out full flash and send email to [email protected]
subject "touchscreen calibration failed"

hussainafridi · 03-19-2009, 13:08

i have already uplaoded my full flash file u can see in massage list number 5.

03-09-2009, 12:34	#1 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	plz help me about tech screen failt I have china mobile which is not working its tech screen.so i have tried by infinity but give me this eorr. i have used all mode . but not don. plz help me about this. ------------------ LOG COM7 [VCP0] selected module v2.78 Action: touchscreen calibration mode: 1 Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:A341:351C status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6226,E02 Date: 2005.04.12 Version: 1.0 Version: TWIN_6226_212_UI2_BYD7787_070730 Version: TWIN_6226 detecting structure #2... 0 done 44 byte(s) read imei: 35010000111122 connection Ok detecting structure #5 (mode-1)... 0 1 2 3 4 5 6 7 8 9error: detection failed (10 tries) What to do: Try another calibration method, if still no luck: 1. make full flash backup for emergency case 2. make "format ffs" 3. Power-On phone 4. Power-Off phone by "Power" button (do NOT remove battery) 5. Repeat "Calibration" operation again 6. if still no luck read full flash and send to support with subject: touchscreen calibration failed error: can't read required data error: operation failed ! Finished, time used: 45 sec Remove/Install battery now ! -------------------- Last edited by hussainafridi; 03-09-2009 at 12:39.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
plz help me kg290 White screen after flash	goldenploto	LG	3	08-13-2009 10:53
I AM NEW & PLZ HELP ME ABOUT FLASHING,UPDATING CDMA OS/SOFTWARE(MODEL-6275iWITH TATA)	debroy66	Nokia CDMA	5	02-08-2008 19:30
smart clip team plz help me about motoroa A1200	Sahil2007	Smart-Clip	7	12-11-2007 18:51
Plz. Help me about - Psiloc crystal thai	ppock	Sony Ericsson Media, RingTones, Games	0	09-06-2007 07:06
plz help me about x600 restarting	sjawall	SWIFT Platform	1	08-31-2006 10:11

03-09-2009, 16:19	#2 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	help me....................

03-11-2009, 14:19	#4 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	All flash file or only info of the flash fille send to suport. plz help me about this, i m new user.

03-11-2009, 15:49	#5 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	here is my full readed flash file here

03-11-2009, 22:42	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! we will check you file, it is downloaded

03-12-2009, 05:59	#7 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	Thanks infinity helper. we are waiting for ur good news.

03-13-2009, 06:43	#8 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	more we will wait ?........

03-13-2009, 10:07	#9 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	how much more time waiting.

03-13-2009, 13:10	#10 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	Not solve my problem.

03-14-2009, 15:02	#11 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	You will be waiting until new "ChineseMiracle" will be released due to we add new features in "ChineseMiracle" update. When it will be ready ? It will be ready soon.

03-16-2009, 12:17	#13 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	i have tried all mode but not solve my problem.

03-19-2009, 13:08	#15 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	i have already uplaoded my full flash file u can see in massage list number 5.