plz tell me pinout CECT Q500 and infinity RJ45 - GSM-Forum

black snake · 08-08-2007, 13:28

hi all can any one tell me what is pinout for :

1) CECT Q500
2) RJ45 connector for infinity boxs?

B R

InfinityHelp · 08-08-2007, 20:58

hello!

please always post connector type and where is located GND pin.
this will help others to assist you

black snake · 08-08-2007, 21:03

i know that it is 1x18 connector type

black snake · 08-09-2007, 12:30

it have 1x18 connector and pin 1 and 2 is GND

reaz.com · 08-09-2007, 13:42

try this.........................................

keyboard top
1.........18
8: Gnd
11: Gnd
13: Rx (RJ-45 pin-2)
14: Tx (RJ-45 pin-3)

black snake · 08-09-2007, 17:06

are you sure ?
because pin 1 and 2 is GND and 14 15 is +battery in my phone

are you sure ?

c_ahmad79 · 08-09-2007, 17:55

q500
100% tested pinout by me
keyboard top
1.........18

1: Gnd
2: Gnd
7: Tx
9: Rx
enjoy
any thing else

siang8788 · 09-05-2007, 14:28

Quote:

Originally Posted by c_ahmad79

q500
100% tested pinout by me
keyboard top
1.........18

1: Gnd
2: Gnd
7: Tx
9: Rx
enjoy
any thing else

thanks mate,work 100%!!!

COM3 [VCP0] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.F02CA3B6.[E553_Y1BT_E553_GPRS_MT6226_S01.01_1.BIN_F01D4C6F].rpl
identification detection finished
device-id: F02CA3B6
protocol ver: 04
ver. sw1: E553_Y1BT_E553_GPRS_MT6226_S01.01_1.BIN
ver. sw2: E553_Y1BT.01.1
ffs offset/size: 00800000/001FF000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
reading [eeprom[E553_Y1BT_E553_GPRS_MT6226_S01.01_1.BIN]]...
file saved: backup_eeprom[E553_Y1BT_E553_GPRS_MT6226_S01.01_1.BIN]_20070905-200048.B0E.bin
flash: EC257E25082501:29EA0000000000
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: EC257E25082501:29EA0000000000
Write Done
file saved: backup_system_log_F02CA3B6_E553_Y1BT_E553_GPRS_MT6 226_S01.01_1.BIN_F01D4C6F_20070905-200106.B0X.bin
Finished, time used: 169 sec
Remove/Install battery now !

**InfinitySupport** · 09-05-2007, 19:12

@c_ahmad79
Thank you for info !

@siang8788
Thank you for good test report !

jignesh269 · 09-05-2007, 19:45

Quote:

Originally Posted by c_ahmad79

q500
100% tested pinout by me
keyboard top
1.........18

1: Gnd
2: Gnd
7: Tx
9: Rx
enjoy
any thing else

thanks man work 1000000000% tested

asims · 01-30-2008, 08:01

new Q500 pinout
11 = (RJ-45 pin-2)
10 = (RJ-45 pin-3)
8 = gnd
tested by me

InfinityHelp · 01-30-2008, 22:04

hello asims!

thank you for this detailed pinout. When pinout is provided with correspondent RJ45 pins- there is no "tx_rx_wires_swap_problem"
assembled cable start to work from first try. this is a exellent example of sharing pinout!!
Thank you one more time, this pinout will be included in our pinout collection after you update it with connector type

GodLike As · 03-28-2008, 21:38

CECT T689, Q500BT pinout !
Red -> USB Connection
Green -> First Procesor
Purple -> Second Procesor

08-08-2007, 13:28	#1 (permalink)
black snake Freak Poster Join Date: Jun 2007 Posts: 406 Member: 525784 Status: Offline Thanks Meter: 8	plz tell me pinout CECT Q500 and infinity RJ45 hi all can any one tell me what is pinout for : 1) CECT Q500 2) RJ45 connector for infinity boxs? B R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mx teem plz tell me how flash 5130c and latest flash file need	mobiletuch	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	4	02-22-2010 08:27
infinity teem plz tell me write backup urgent	mobiletuch	Infinity-Box	4	12-16-2009 08:26
plz hep me pinout cect c1000 2sim	bibooo	Chinese Models & Cloned Phones	6	04-23-2009 22:00
PLZ tell me infinity team	abid dar	Infinity-Box	10	12-14-2008 11:01
PLZ tell me from which address can I download Simpic and other softwares	Hasse	Hardware Equipments for GSM	2	01-26-2002 03:11

08-08-2007, 20:58	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! please always post connector type and where is located GND pin. this will help others to assist you

08-08-2007, 21:03	#3 (permalink)
black snake Freak Poster Join Date: Jun 2007 Posts: 406 Member: 525784 Status: Offline Thanks Meter: 8	i know that it is 1x18 connector type

08-09-2007, 12:30	#4 (permalink)
black snake Freak Poster Join Date: Jun 2007 Posts: 406 Member: 525784 Status: Offline Thanks Meter: 8	it have 1x18 connector and pin 1 and 2 is GND

08-09-2007, 13:42	#5 (permalink)
reaz.com No Life Poster Join Date: Jul 2006 Location: JSR, BD Posts: 2,041 Member: 310155 Status: Offline Thanks Meter: 1,313	try this......................................... keyboard top 1.........18 8: Gnd 11: Gnd 13: Rx (RJ-45 pin-2) 14: Tx (RJ-45 pin-3)

08-09-2007, 17:06	#6 (permalink)
black snake Freak Poster Join Date: Jun 2007 Posts: 406 Member: 525784 Status: Offline Thanks Meter: 8	are you sure ? because pin 1 and 2 is GND and 14 15 is +battery in my phone are you sure ?

08-09-2007, 17:55	#7 (permalink)
c_ahmad79 No Life Poster Join Date: Jan 2006 Location: inside emmc ufs Age: 19 Posts: 7,188 Member: 221603 Status: Offline Sonork: 100.1581270 Thanks Meter: 6,395	q500 100% tested pinout by me keyboard top 1.........18 1: Gnd 2: Gnd 7: Tx 9: Rx enjoy any thing else

09-05-2007, 19:12	#9 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	@c_ahmad79 Thank you for info ! @siang8788 Thank you for good test report !

01-30-2008, 08:01	#11 (permalink)
asims Freak Poster Join Date: Feb 2006 Posts: 150 Member: 235616 Status: Offline Thanks Meter: 67	new Q500 pinout 11 = (RJ-45 pin-2) 10 = (RJ-45 pin-3) 8 = gnd tested by me

01-30-2008, 22:04	#12 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello asims! thank you for this detailed pinout. When pinout is provided with correspondent RJ45 pins- there is no "tx_rx_wires_swap_problem" assembled cable start to work from first try. this is a exellent example of sharing pinout!! Thank you one more time, this pinout will be included in our pinout collection after you update it with connector type

03-28-2008, 21:38	#13 (permalink)
GodLike As Junior Member Join Date: May 2006 Location: Piatra Neamt, Romania EU Posts: 37 Member: 273705 Status: Offline Thanks Meter: 34	CECT T689, Q500BT pinout ! Red -> USB Connection Green -> First Procesor Purple -> Second Procesor