Polaroid PRO5023POE01 Firmware needed urgent (SC7731G) - GSM-Forum

**Brka** · 02-02-2018, 02:52

Hi,

As title says ... Polaroid PRO5023POE01 ROM needed ...

more info :

Code:

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : Spreadtrum
Device Model   : scx35_s7301_fwvga
Device CPU     : sp7731gea
Device IntName : scx35_s7301_fwvgaplus_UUI_Multilang_dt
Device Version : 4.4.2
Device Compile : 4/8/2016 7:02:08 AM
Device Project : PRO5023POE01_MW5056_20160408_V7.1
Device ExtInfo : PRO5023POE01

Short history: Phone had WiFi Issues, I readed full backup, NV also,
tried some rom from needrom, after that phone dead.
Even with it's own, readed backup.
Tried also with older CM2SPD versions, still same.

Used rom from HERE - direct DL link HERE
and it didn't get it back to life ...

So ... anyone with such (working) phone or working backup,
please be kind to upload it somewhere / share link.

thanks in advance.

p.s. This is the phone :

b.r.
Alex

mobi_soft · 02-02-2018, 13:12

did you try this one

PRO5023PVE01__cheddihouse

pass- dzgsm

mbiborna · 02-02-2018, 13:32

Quote:

Originally Posted by mobi_soft

did you try this one

PRO5023PVE01__cheddihouse

pass- dzgsm

Quote:

Originally Posted by mobi_soft

did you try this one

PRO5023PVE01__cheddihouse

pass- dzgsm

@ mobi_soft
You posted this link is MTK Cpu Rom.

**Brka** · 02-02-2018, 21:46

There is a BIG difference between PRO5023POE01 and PRO5023PVE01

POE01 is SPD7731G CPU,
PVE01 is MTK 6572 CPU.

So ... search is not over yet

b.r.
Alex

MDxavi · 02-02-2018, 23:12

Quote:

Originally Posted by Brka

There is a BIG difference between PRO5023POE01 and PRO5023PVE01

POE01 is SPD7731G CPU,
PVE01 is MTK 6572 CPU.

So ... search is not over yet

b.r.
Alex

Code:

====  Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_s7301_fwvgaplus_UUI_Multilang_dt
Model Brand : Spreadtrum
Model Device: scx35_s7301_fwvga
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : PRO5023POE01_MW5056_20160811_V10.1
Model Ext   : PRO5023POE01

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.09_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
Skip [EMP] : FBOOTLOGO
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 743 MiB
Saved to : C:UsersllcoolrDesktopSP7731GEA_scx35_s7301_fwvga_4.4.2_PRO5023POE01_MW5056_20160811_V10.1_PRO5023POE01
Done!

link MEGA

thanks to original uploader llcoolr

password:

Quote:

www.dzgsm.com

**Brka** · 02-02-2018, 23:41

Thanks for reply, but that is exactly the same rom,
which I already used, and after which, phone became dead.
I already put link to that rom in my 1st post ...

Still looking for another backup if any out there ...

b.r.
Alex

InfinityHelp · 02-03-2018, 13:00

Let me bump this thread with request to all users:

If you have good flash files and if you want to share it with other users please use IOS File Uploader Tool
Please do not upload password protected or damaged files, all of them will be deleted after upload.

gsmro2012 · 06-07-2018, 15:33

hello
i need a working firmware for the spd model
can someone share a good working pac file?

InfinityHelp · 08-22-2018, 10:28

Quote:

Originally Posted by gsmro2012

hello
i need a working firmware for the spd model
can someone share a good working pac file?

What "spd model" name do you mean ?

extra power · 12-29-2018, 15:58

Model Name : scx35_s7301_fwvgaplus_UUI_Multilang_dt
Model Brand : Spreadtrum
Model Device: scx35_s7301_fwvga
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : PRO5023POE01_MW5056_20160811_V10.1
Model Ext : PRO5023POE01

carlos32 · 12-29-2018, 17:40

Quote:

Originally Posted by Brka

Hi,

As title says ... Polaroid PRO5023POE01 ROM needed ...

more info :

Code:

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : Spreadtrum
Device Model   : scx35_s7301_fwvga
Device CPU     : sp7731gea
Device IntName : scx35_s7301_fwvgaplus_UUI_Multilang_dt
Device Version : 4.4.2
Device Compile : 4/8/2016 7:02:08 AM
Device Project : PRO5023POE01_MW5056_20160408_V7.1
Device ExtInfo : PRO5023POE01

Short history: Phone had WiFi Issues, I readed full backup, NV also,
tried some rom from needrom, after that phone dead.
Even with it's own, readed backup.
Tried also with older CM2SPD versions, still same.

Used rom from HERE - direct DL link HERE
and it didn't get it back to life ...

So ... anyone with such (working) phone or working backup,
please be kind to upload it somewhere / share link.

thanks in advance.

p.s. This is the phone :

b.r.
Alex

maybe this will help...https://www.freemobilefirmware.com/2...itkat-spd.html

br

**Brka** · 12-29-2018, 22:50

Quote:

Originally Posted by carlos32

maybe this will help...https://www.freemobilefirmware.com/2...itkat-spd.html

br

Thanks for the file. Unfortunatly, phone is returned long time ago ...

hope it will help to somebody else in the future ...

btw. file from that link info is as follows :

Quote:

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : Spreadtrum
Device Model : scx35_s7301_fwvga
Device CPU : sp7731gea
Device IntName : scx35_s7301_fwvgaplus_UUI_Multilang_dt
Device Version : 4.4.2
Device Compile : 11/08/2016 02:46:46
Device Project : PRO5023POE01_MW5056_20160811_V10.1
Device ExtInfo : PRO5023POE01

b.r.
Alex

02-02-2018, 02:52	#1 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,200 Member: 163 Status: Offline Thanks Meter: 7,777	Polaroid PRO5023POE01 Firmware needed urgent (SC7731G) Hi, As title says ... Polaroid PRO5023POE01 ROM needed ... more info : Code: Created by Infinity-Box (c) Chinese Miracle II (c) 2017 Device Brand : Spreadtrum Device Model : scx35_s7301_fwvga Device CPU : sp7731gea Device IntName : scx35_s7301_fwvgaplus_UUI_Multilang_dt Device Version : 4.4.2 Device Compile : 4/8/2016 7:02:08 AM Device Project : PRO5023POE01_MW5056_20160408_V7.1 Device ExtInfo : PRO5023POE01 Short history: Phone had WiFi Issues, I readed full backup, NV also, tried some rom from needrom, after that phone dead. Even with it's own, readed backup. Tried also with older CM2SPD versions, still same. Used rom from HERE - direct DL link HERE and it didn't get it back to life ... So ... anyone with such (working) phone or working backup, please be kind to upload it somewhere / share link. thanks in advance. p.s. This is the phone : b.r. Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

02-02-2018, 21:46	#4 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,200 Member: 163 Status: Offline Thanks Meter: 7,777	There is a BIG difference between PRO5023POE01 and PRO5023PVE01 POE01 is SPD7731G CPU, PVE01 is MTK 6572 CPU. So ... search is not over yet b.r. Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

02-02-2018, 23:41	#6 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,200 Member: 163 Status: Offline Thanks Meter: 7,777	Thanks for reply, but that is exactly the same rom, which I already used, and after which, phone became dead. I already put link to that rom in my 1st post ... Still looking for another backup if any out there ... b.r. Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-02-2018, 13:12	#2 (permalink)
mobi_soft No Life Poster Join Date: Sep 2009 Location: Hello Online Service Posts: 1,941 Member: 1126941 Status: Offline Sonork: 100.1672154 Thanks Meter: 2,488	did you try this one PRO5023PVE01__cheddihouse pass- dzgsm

02-03-2018, 13:00	#7 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	Let me bump this thread with request to all users: If you have good flash files and if you want to share it with other users please use IOS File Uploader Tool Please do not upload password protected or damaged files, all of them will be deleted after upload.

06-07-2018, 15:33	#8 (permalink)
gsmro2012 No Life Poster Join Date: Sep 2012 Location: UK Posts: 1,245 Member: 1816005 Status: Offline Thanks Meter: 299	hello i need a working firmware for the spd model can someone share a good working pac file?

12-29-2018, 15:58	#10 (permalink)
extra power Registered User Join Date: Oct 2004 Location: Tanzania Age: 47 Posts: 510 Member: 86787 Status: Offline Sonork: www.sammy685344861 Thanks Meter: 31	Model Name : scx35_s7301_fwvgaplus_UUI_Multilang_dt Model Brand : Spreadtrum Model Device: scx35_s7301_fwvga AndrVersion : 4.4.2 BaseBand CPU: SP7731GEA Project Ver : PRO5023POE01_MW5056_20160811_V10.1 Model Ext : PRO5023POE01