Problem with tx and rx!!!!!!!!!!!!!! - GSM-Forum

joe 1 · 06-20-2007, 10:33

I'm a new user of infinity box, now i have a digital and analog multimeter, My problem now is this:

1 How do i adjust the digital and analog which so ever? is it to continouity or to a stop?
2 Where do i place the tips of the meter on the phone to give me d value tx and rx?
3 How do i know the difference between the tx and rx? is it by icon or by number?
4 What is the value it will give for me to know its Tx and also what's the value it will give for me to know its Rx.

These are my questions, Pls infinity we need answers as most of us in this forum are stuck with these phones.

All comments are welcome. Thanks in advance.

**InfinitySupport** · 06-20-2007, 12:00

Hello,

Please, see instruction here, I hope it helps:
http:///vbb/showpo...36&postcount=7

kaino147 · 06-20-2007, 12:56

don't think that will help most of us. The explanation is not satisfactory, the question still remains HOW DO WE FIND TX, RX, AND GND. WHAT ARE THE PROCEDURES. these are the questions we need answers to.

joe 1 · 06-20-2007, 13:30

In most cases you need to know Gnd, Rx, Tx pins for flash/unlock operations. What do do if you don't have cable or you have new phone model:

1. find Gnd pin (it's required step, you can't continue until you will know Gnd pin location)
2. find Charge pins (it's optional step, just to save your time during future research)
3. find +Battery pins (it's optional step, just to save your time during future research)
4. connect cable Gnd to phone Gnd
5. try to connect cable Rx/Tx wires to all phone contacts one by one (except Gnd, Charge, +Battery pins) and try to read flash from phone
6. if flash read procedure can start this means that pinout found Ok and you can make
INFINITY TEAM PLEASE HELP US, show us pic or good schimatics even video clips.

joe 1 · 06-20-2007, 13:36

we need solutions not discaution infinity supporter please help us with this problem, we are closing our shops because of this problem, if there is any cable to buy just to get out of this mess please do

kaino147 · 06-20-2007, 14:29

I've come to know infinity team is not explanatory enough. They're trying to escape questions that needs answers. You guy should have come up with total solution before adding this **** of chinese miracle to your softwares. Its making alot of us that bought infinity becos of chinese miracle to suffer.

Santehnik · 06-29-2007, 21:26

I bought a box to repair China miracle phones. but I bought a lot of problem to myself. Beacause I have no time to make and test cable with out any schematics or pic. just I found text format instruction (It is no good, and no good busines). Where are you Infinity team? It is realy no good.
Beacuse when I just planing to buy a box to repair china miracle phones I visited to support site and I saw that Infinity is rapiring this phones but I don't see that problems with cable package.
I'm so angry and confused with this.
I'm using MTK box but I had no any problems with cables, because to dificult find good connectors for this phones.

nishaon · 06-30-2007, 10:12

That is true, have to work hard to make cable

kaino147 · 07-01-2007, 16:16

Nobody should buy infinity if its all becos of chinese miracle. Infinity ***** on that aspect. D advice is "Get mtk box and be free from all infinity team hassles".

ali280 · 08-26-2007, 00:33

1.find GND
2.CHECK VOLT BY MULTIMETER MUST BETWEEN 2.76 OR 2.89

CPUKILLER · 08-26-2007, 04:31

Quote:

Originally Posted by ali280

1.find GND
2.CHECK VOLT BY MULTIMETER MUST BETWEEN 2.76 OR 2.89

to be checked powered on or while powering on

06-20-2007, 10:33	#1 (permalink)
joe 1 Insane Poster Join Date: Jun 2004 Posts: 65 Member: 68359 Status: Offline Thanks Meter: 0	Problem with tx and rx!!!!!!!!!!!!!! I'm a new user of infinity box, now i have a digital and analog multimeter, My problem now is this: 1 How do i adjust the digital and analog which so ever? is it to continouity or to a stop? 2 Where do i place the tips of the meter on the phone to give me d value tx and rx? 3 How do i know the difference between the tx and rx? is it by icon or by number? 4 What is the value it will give for me to know its Tx and also what's the value it will give for me to know its Rx. These are my questions, Pls infinity we need answers as most of us in this forum are stuck with these phones. All comments are welcome. Thanks in advance.

06-20-2007, 13:30	#4 (permalink)
joe 1 Insane Poster Join Date: Jun 2004 Posts: 65 Member: 68359 Status: Offline Thanks Meter: 0	In most cases you need to know Gnd, Rx, Tx pins for flash/unlock operations. What do do if you don't have cable or you have new phone model: 1. find Gnd pin (it's required step, you can't continue until you will know Gnd pin location) 2. find Charge pins (it's optional step, just to save your time during future research) 3. find +Battery pins (it's optional step, just to save your time during future research) 4. connect cable Gnd to phone Gnd 5. try to connect cable Rx/Tx wires to all phone contacts one by one (except Gnd, Charge, +Battery pins) and try to read flash from phone 6. if flash read procedure can start this means that pinout found Ok and you can make INFINITY TEAM PLEASE HELP US, show us pic or good schimatics even video clips. Last edited by joe 1; 06-20-2007 at 13:43.

08-26-2007, 00:33	#10 (permalink)
ali280 Freak Poster Join Date: Sep 2004 Age: 58 Posts: 113 Member: 81104 Status: Offline Thanks Meter: 25	100% working solution for finding tx rx 1.find GND 2.CHECK VOLT BY MULTIMETER MUST BETWEEN 2.76 OR 2.89

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Second and tested way to find Tx and Rx signal via pic!	Santehnik	Infinity-Box	88	04-22-2016 20:30
Finding TX and RX with Infinity BOX and Multimeter	pager12	Infinity-Box	1	07-06-2008 23:04
Electrical question 1. About tx and rx	elforodelmovil	GSM Programming & Reverse Engineering	11	05-25-2007 20:12
philips 630, has signal but no tx and rx	peci_rs	Philips	2	03-16-2006 12:42
What is TX and RX?????????	Shahrukh	Nokia Hardware & Hardware Repair	1	06-29-2003 10:45

06-20-2007, 12:00	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Please, see instruction here, I hope it helps: http:///vbb/showpo...36&postcount=7

06-20-2007, 12:56	#3 (permalink)
kaino147 No Life Poster Join Date: Feb 2004 Location: NIGERIA, DELTA STATE, WARRI Posts: 867 Member: 53891 Status: Offline Thanks Meter: 41	don't think that will help most of us. The explanation is not satisfactory, the question still remains HOW DO WE FIND TX, RX, AND GND. WHAT ARE THE PROCEDURES. these are the questions we need answers to.

06-20-2007, 13:36	#5 (permalink)
joe 1 Insane Poster Join Date: Jun 2004 Posts: 65 Member: 68359 Status: Offline Thanks Meter: 0	we need solutions not discaution infinity supporter please help us with this problem, we are closing our shops because of this problem, if there is any cable to buy just to get out of this mess please do

06-20-2007, 14:29	#6 (permalink)
kaino147 No Life Poster Join Date: Feb 2004 Location: NIGERIA, DELTA STATE, WARRI Posts: 867 Member: 53891 Status: Offline Thanks Meter: 41	I've come to know infinity team is not explanatory enough. They're trying to escape questions that needs answers. You guy should have come up with total solution before adding this **** of chinese miracle to your softwares. Its making alot of us that bought infinity becos of chinese miracle to suffer.

06-29-2007, 21:26	#7 (permalink)
Santehnik Freak Poster Join Date: Jul 2005 Location: Tajikistan Age: 43 Posts: 109 Member: 161985 Status: Offline Thanks Meter: 59	I bought a box to repair China miracle phones. but I bought a lot of problem to myself. Beacause I have no time to make and test cable with out any schematics or pic. just I found text format instruction (It is no good, and no good busines). Where are you Infinity team? It is realy no good. Beacuse when I just planing to buy a box to repair china miracle phones I visited to support site and I saw that Infinity is rapiring this phones but I don't see that problems with cable package. I'm so angry and confused with this. I'm using MTK box but I had no any problems with cables, because to dificult find *good connectors* for this phones.

06-30-2007, 10:12	#8 (permalink)
nishaon No Life Poster Join Date: Jan 2006 Location: Deep Blue G.S.M. Posts: 2,369 Member: 225229 Status: Offline Thanks Meter: 90	That is true, have to work hard to make cable

07-01-2007, 16:16	#9 (permalink)
kaino147 No Life Poster Join Date: Feb 2004 Location: NIGERIA, DELTA STATE, WARRI Posts: 867 Member: 53891 Status: Offline Thanks Meter: 41	Nobody should buy infinity if its all becos of chinese miracle. Infinity ***** on that aspect. D advice is "Get mtk box and be free from all infinity team hassles".