problem with unlocking Sagem (Vodafone) 226
 

COM5 [VCP2] selected
module v1.68
Device: Vodafone-226
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
e-gold: 820010
loading...
error: can't run preloader: FF
middle part...
error: can't run middle loader:
Finished, time used: 10 sec
Remove/Install battery now !


:/

Which cable r u using?

no it's not cable problem.
some sagem/vodafone phones - must be all time press power key for unlock. ;)

i think the cable u r using is bad,try change cable.cos i unlock vodafone 226 successfully

Press the power button until the end

dont do it with battery
give powr through powersupply at 4.8v
long press power button and hope u ll succeed....

dont do it with battery
give powr through powersupply at 4.8v
long press power button and hope u ll succeed....:)

tested:cool:
br
azeeM

Always i have this :
COM3 [VCP0] selected
module v1.69
Device: Sagem-my226
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
e-gold: 820010
loading...
error: can't run preloader: 01
middle part...
error: can't run middle loader: 0802
Finished, time used: 5 sec
Remove/Install battery now !

check full charged battery and press power button for a bit longer

Thanks freind to your reply ... Yes I always used a full charged 4.8v and 5.2v ... but the same result ... :confused:

change speed.
also way of unlocking, some times must be cable in phone and when i s/w want to power up phone put battery and press power :)