GSM-Forum - PxPhone i9220 MT625a - problem with reading full flash

Hello.
I have PxPhone i9220 with MT625A CPU, and I'd like to translate, but I can not read backup.

How can I read backup?

Code:

[Infinity Box] MModule v4.45

smart-card: connected (Axalto e-gate 0)

S/N: 0694:0120:00

Wait...

trying to select model: /AUTODETECT

model selected via command line: _Autodetect MT6205-6239 NOR

Device: _Autodetect MT6205-6239 NOR

Initialization done

Device: _Autodetect MT6250-6253 etc.
 

==== [2013-07-18 16:42:59] ====

COM98 [VCP1] selected

module  v4.45

Device: _Autodetect MT6250-6253 etc.

Checking data, wait...

Action: read flash NAND

interface: BROM_DLL_v3.1108.00

Connect...

Phone should be Switched OFF !

Press and HOLD Power button now !

bootcode current/expected: 0.0/3.2

CPU: 0000:0000:0000

status: 00

bbchip bl ver: 00

NOR chip is not detected

NAND chip is not detected

Repeat operation, Press and HOLD Power button more long time !

internal RAM size: 00000000

external RAM [HW_RAM_UNKNOWN, CS0] size: 00000000

sec error code: 00

error: can not boot device: 07E6:S_BROM_FAIL_TO_GET_BBCHIP_HW_VER

error: last error: 07E6:S_BROM_FAIL_TO_GET_BBCHIP_HW_VER

Disconnect...

done

Finished, time used: 1 min 5 sec

Remove/Install battery now !

Device: _Autodetect MT6228-6276 NAND

In most cases you can read "firmware" instead of "full flash",

it may helps to save a lot of time with the same functionality.

Suggestion: read "firmware" now

Do you want to read "firmware" instead of "full flash" ?
 

==== [2013-07-18 16:44:31] ====

COM98 [VCP1] selected

module  v4.45

Device: _Autodetect MT6228-6276 NAND

Checking data, wait...

Action: read flash NAND

interface: BROM_DLL_v3.1108.00

Connect...

Phone should be Switched OFF !

Press and HOLD Power button now !

bootcode current/expected: 0.0/3.2

CPU: 0000:0000:0000

status: 00

bbchip bl ver: 00

NOR chip is not detected

NAND chip is not detected

Repeat operation, Press and HOLD Power button more long time !

internal RAM size: 00000000

external RAM [HW_RAM_UNKNOWN, CS0] size: 00000000

sec error code: 00

error: can not boot device: 07E6:S_BROM_FAIL_TO_GET_BBCHIP_HW_VER

error: last error: 07E6:S_BROM_FAIL_TO_GET_BBCHIP_HW_VER

Disconnect...

done

Finished, time used: 38 sec

Remove/Install battery now !

Device: _Autodetect MT6205-6239 NOR
 

==== [2013-07-18 16:45:21] ====

COM98 [VCP1] selected

module  v4.45

Device: _Autodetect MT6205-6239 NOR

Checking data, wait...

advanced flash detection enabled

Action: read flash

====>  Boot ...

Press and HOLD Power button now !

error: can't detect device

Release Power button now !

in case of initial connection problem: on/off "Boot baudrate autoselect"

Boot Fail

Finished, time used: 22 sec

Remove/Install battery now !

Pictures:
http://gsmpro.com.pl/data/PxPhone_3.jpg
http://gsmpro.com.pl/data/PxPhone_2.jpg
http://gsmpro.com.pl/data/PxPhone_1.jpg