Qmobile A500 write flash error - GSM-Forum

sanyomobile · 06-06-2015, 11:34

bin file

Wait for phone...
Phone found! [ 47 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 4E0001154D5A5735058201424D803145
DA Stat : v3.2 on BBID : 0x86
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00B8

Error : DA init Failed! Error code : 0x5
LErr : EMICFG_NOT_FOUND

Boot Error!

Operation Failed
Elapsed: 00:00:07

scatter file

Wait for phone...
Phone found! [ 47 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 4E0001154D5A5735058201424D803145
DA Stat : v3.2 on BBID : 0x86
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00B8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...

DA start Failed!
Check battery , cable , drivers and try try again

Boot Error!

Operation Failed
Elapsed: 00:00:07
Reconnect Power/Cable!

with sp tool write flash done

JayDi · 06-06-2015, 11:51

It is really hard connect without holding keys? If yes - nothing more to help.

sanyomobile · 06-06-2015, 11:57

yes connect without holding keys but same problem

i flash with sp tool and now phone 100% ok

JayDi · 06-06-2015, 12:01

Ok, that is great then.

saadkanwar · 09-07-2015, 08:22

mera qa500 bhi dead ho gya h ap ne sp tool sy kese kiya flash plzz tell me

06-06-2015, 11:34	#1 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	Qmobile A500 write flash error bin file Wait for phone... Phone found! [ 47 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6583 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0001 BB_CPU_NM : [MediaTek] MT6583\|6589_S00 Processing BROM stage SecCfgVal : 0x00000000 BromVersion : 0x05 BLVersion : 0xFE Preloader Status : Not active (Erased) Processing DA stage DA Select done , sending NAND_ID : 00000000000000000000000000000000 eMMC_ID : 4E0001154D5A5735058201424D803145 DA Stat : v3.2 on BBID : 0x86 DRAM not initialized , configure DRAM Settings DRAM EmiReq Ok , 0x00B8 Error : DA init Failed! Error code : 0x5 LErr : EMICFG_NOT_FOUND Boot Error! Operation Failed Elapsed: 00:00:07 scatter file Wait for phone... Phone found! [ 47 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6583 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0001 BB_CPU_NM : [MediaTek] MT6583\|6589_S00 Processing BROM stage SecCfgVal : 0x00000000 BromVersion : 0x05 BLVersion : 0xFE Preloader Status : Not active (Erased) Processing DA stage DA Select done , sending NAND_ID : 00000000000000000000000000000000 eMMC_ID : 4E0001154D5A5735058201424D803145 DA Stat : v3.2 on BBID : 0x86 DRAM not initialized , configure DRAM Settings DRAM EmiReq Ok , 0x00B8 DRAM Init Ok , 0x20000000 DA Sent. Configure setting now ... DA start Failed! Check battery , cable , drivers and try try again Boot Error! Operation Failed Elapsed: 00:00:07 Reconnect Power/Cable! with sp tool write flash done

09-07-2015, 08:22	#5 (permalink)
saadkanwar Junior Member Join Date: Sep 2015 Posts: 1 Member: 2455470 Status: Offline Sonork: snoker.com Thanks Meter: 0	error mera qa500 bhi dead ho gya h ap ne sp tool sy kese kiya flash plzz tell me

06-06-2015, 11:51	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	It is really hard connect without holding keys? If yes - nothing more to help.

06-06-2015, 11:57	#3 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	yes connect without holding keys but same problem i flash with sp tool and now phone 100% ok

06-06-2015, 12:01	#4 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Ok, that is great then.