Qmobile M95 Fixed Firmware 100% tested - GSM-Forum

Nasir Mobiles · 09-25-2016, 20:57

Qmobile M95 Fixed Firmware 100% working solution.

If your phone sleep while flashing here is final and working solution.

there are 2 states of M95 after going sleep any way.

1. Vibrate only
2. nothing .... fully dead.

so for 1st option simply download given firmware and phone will get life.
for 2nd option there can be 3 reasons.

1. Battery dead ( please charge battery and flash phone with given file)
2. Partitions required to reconfigured ( erase phone again with cm2spd 1.20 and flash with given firmware.
3. hardware / emmc / damage ( you know better what to do )

this is what I discovered while my expirement please correct me if you found something wrong.

Download Link.
https://www.facebook.com/Testedsolut...97077603839628

khanzada606 · 09-26-2016, 07:15

there i two version for M95, which one you have shared ?
is this work on both versions?

asad_nomy7 · 09-26-2016, 09:28

3 versions of software and 2 versions of hardware.

M95_03_07
M95 15_01
M95_MP_11_20_HD V2

Nasir Mobiles · 09-26-2016, 09:49

this is v1
v2 is also ready I'll post today.

naveedullah0044 · 09-26-2016, 16:52

Quote:

Originally Posted by Nasir Mobiles

Qmobile M95 Fixed Firmware 100% working solution.

If your phone sleep while flashing here is final and working solution.

there are 2 states of M95 after going sleep any way.

1. Vibrate only
2. nothing .... fully dead.

so for 1st option simply download given firmware and phone will get life.
for 2nd option there can be 3 reasons.

1. Battery dead ( please charge battery and flash phone with given file)
2. Partitions required to reconfigured ( erase phone again with cm2spd 1.20 and flash with given firmware.
3. hardware / emmc / damage ( you know better what to do )

this is what I discovered while my expirement please correct me if you found something wrong.

Download Link.
https://www.facebook.com/Testedsolut...97077603839628

thanks sharing this file my dead phone many days ok---

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 13 ]
Port Opened
Sync...
Initial Boot Failed!

Reconnect Power/Cable!

Operation : Check/Read Info [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 13 ]
Port Opened
Sync...
Initial Boot Failed!

Reconnect Power/Cable!

Operation : Check/Read Info [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : scx35_sp7731geaplus_dt
Model Brand : QMobile
Model Device: scx35_sp7731gea
AndrVersion : 4.4.3
BaseBand CPU: SP7731GEA
CompileDate : 7/3/2015 2:38:50 PM
Project Ver : KOT49H 14B_test-keys
Model Ext : QMobile M95

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:13

Reconnect Power/Cable!

Loading : M95 v1 by Nasir Mobiles.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : M95 v1 by Nasir Mobiles
FastCheck : 0x00537684CD

Loading files ...

File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731g_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
File : logo_540x960.bin
File : fblogo_540x960.bin
File : boot.img
File : system.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin
File : SC77xx.xml

Load Ok!

Operation : Flash [ v1.21 ]

======= Flash
Files set for flashing :
[ MCU ] : M95 v1 by Nasir Mobiles.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : M95 v1 by Nasir Mobiles
File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731g_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
File : logo_540x960.bin
File : fblogo_540x960.bin
File : boot.img
File : system.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : User decide to make whole erase
[FL] : FLASH_FULL_FORMAT executing , wait ...
[FL] : FLASH_FULL_FORMAT Ok!

PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_W
Current File : sc7731g_CP0_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_Gx.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo_540x960.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : fblogo_540x960.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!

Elapsed: 00:04:28

Reconnect Power/Cable!

khanzada606 · 09-26-2016, 19:51

When M95 Was first Released , i read firmware that Time For version 1
is this your firmware same as mine OR you have improved or modified Firmware .
Thanks!!

Nasir Mobiles · 09-28-2016, 14:51

yes this is modified fixed firmware which is read by CM2SPD.

M95 v2 link updated...

https://www.facebook.com/Testedsolut...98263913720997

3214144478 · 10-02-2016, 15:15

thank you so much bro
my problem solve with your file

khanzada606 · 10-14-2016, 21:16

Quote:

Originally Posted by Nasir Mobiles

yes this is modified fixed firmware which is read by CM2SPD.

M95 v2 link updated...

https://www.facebook.com/Testedsolut...98263913720997

i receive phone which stuck on logo it cant boot inside of menu
ho do i know its version 1 or version 2 ,
which file should i flash on faulty phone Version 1 Or version 2?
Thanks!

Nasir Mobiles · 10-14-2016, 21:54

look at back sticker of phone.
V1 has nothing except IMEI.
v2 has printed clearly V2.

so very easy to identify.

below is v2 example:

YellowBoss · 10-14-2016, 22:10

Quote:

Originally Posted by Nasir Mobiles

yes this is modified fixed firmware which is read by CM2SPD.

M95 v2 link updated...

....

If you have good flash files and if you want to share it with other users please use IOS File Uploader Tool

Thank you !

khanzada606 · 10-15-2016, 08:06

now i see completely About Qmobile M95
thanks! for helping
appreciated work

Tabu43 · 10-15-2016, 11:30

Operation : Format File System / Reset Settings [ v1.22 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 197 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

UserData : PART_MOUNT failed! Part Damaged! Will use Repair Mode!

Cache : PART_MOUNT failed! Part Damaged! Will use Repair Mode!

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:34

Reconnect Power/Cable!

set have blue display

Tabu43 · 10-15-2016, 12:14

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 197 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Failed!!!
Selected firmware doesn't match to current HW or EMPTY battery!
Flashing terminated!

Elapsed: 00:00:00

Reconnect Power/Cable!

khanzada606 · 10-15-2016, 18:08

mr jaydi Please think of Qmobile M95 and Qmobile T480
no one can do as you can
more than 100 hair fall in one night but Qmobile t480 still dancing on bolt LOgo

09-25-2016, 20:57	#1 (permalink)
Nasir Mobiles No Life Poster Join Date: Sep 2006 Location: ---> Hope Posts: 2,028 Member: 355782 Status: Offline Thanks Meter: 1,265	Qmobile M95 Fixed Firmware 100% tested Qmobile M95 Fixed Firmware 100% working solution. If your phone sleep while flashing here is final and working solution. there are 2 states of M95 after going sleep any way. 1. Vibrate only 2. nothing .... fully dead. so for 1st option simply download given firmware and phone will get life. for 2nd option there can be 3 reasons. 1. Battery dead ( please charge battery and flash phone with given file) 2. Partitions required to reconfigured ( erase phone again with cm2spd 1.20 and flash with given firmware. 3. hardware / emmc / damage ( you know better what to do ) this is what I discovered while my expirement please correct me if you found something wrong. Download Link. https://www.facebook.com/Testedsolut...97077603839628

09-26-2016, 07:15	#2 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	there i two version for M95, which one you have shared ? is this work on both versions?

09-26-2016, 09:28	#3 (permalink)
asad_nomy7 No Life Poster Join Date: Aug 2007 Location: Pakistan Posts: 2,306 Member: 570093 Status: Offline Thanks Meter: 1,067	3 versions of software and 2 versions of hardware. M95_03_07 M95 15_01 M95_MP_11_20_HD V2

09-26-2016, 09:49	#4 (permalink)
Nasir Mobiles No Life Poster Join Date: Sep 2006 Location: ---> Hope Posts: 2,028 Member: 355782 Status: Offline Thanks Meter: 1,265	this is v1 v2 is also ready I'll post today.

09-26-2016, 19:51	#6 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	When M95 Was first Released , i read firmware that Time For version 1 is this your firmware same as mine OR you have improved or modified Firmware . Thanks!!

09-28-2016, 14:51	#7 (permalink)
Nasir Mobiles No Life Poster Join Date: Sep 2006 Location: ---> Hope Posts: 2,028 Member: 355782 Status: Offline Thanks Meter: 1,265	yes this is modified fixed firmware which is read by CM2SPD. M95 v2 link updated... https://www.facebook.com/Testedsolut...98263913720997

10-02-2016, 15:15	#8 (permalink)
3214144478 Freak Poster Join Date: Oct 2012 Location: sadar cantt lahore Posts: 315 Member: 1821487 Status: Offline Thanks Meter: 18	thank you so much bro my problem solve with your file

10-14-2016, 21:54	#10 (permalink)
Nasir Mobiles No Life Poster Join Date: Sep 2006 Location: ---> Hope Posts: 2,028 Member: 355782 Status: Offline Thanks Meter: 1,265	look at back sticker of phone. V1 has nothing except IMEI. v2 has printed clearly V2. so very easy to identify. below is v2 example:

10-15-2016, 08:06	#12 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	now i see completely About Qmobile M95 thanks! for helping appreciated work

10-15-2016, 11:30	#13 (permalink)
Tabu43 No Life Poster Join Date: May 2014 Posts: 1,003 Member: 2195211 Status: Offline Thanks Meter: 4,294,967,295	Operation : Format File System / Reset Settings [ v1.22 ] Settings : SmartFormat is On 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 197 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! eMMC phone detected! Will use 'Safe Format' mode! UserData : PART_MOUNT failed! Part Damaged! Will use Repair Mode! Cache : PART_MOUNT failed! Part Damaged! Will use Repair Mode! Prepare Ok! Format Ok! Don't touch phone, until it fully bootup to "Welcome Screen"! Done! Elapsed: 00:00:34 Reconnect Power/Cable! set have blue display

10-15-2016, 12:14	#14 (permalink)
Tabu43 No Life Poster Join Date: May 2014 Posts: 1,003 Member: 2195211 Status: Offline Thanks Meter: 4,294,967,295	1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 197 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! PMTManager : Load 0x17 records PMTManager : PMT Update Failed!!! Selected firmware doesn't match to current HW or EMPTY battery! Flashing terminated! Elapsed: 00:00:00 Reconnect Power/Cable!

10-15-2016, 18:08	#15 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	mr jaydi Please think of Qmobile M95 and Qmobile T480 no one can do as you can more than 100 hair fall in one night but Qmobile t480 still dancing on bolt LOgo