GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   QMobileJ1 Read Flash file done with hreat tool cm2 by .::Mustafa::. (https://forum.gsmhosting.com/vbb/f296/qmobilej1-read-flash-file-done-hreat-tool-cm2-mustafa-2378075/)

.::Mustafa::. 04-07-2018 08:31

QMobileJ1 Read Flash file done with hreat tool cm2 by .::Mustafa::.
 
Chinese Miracle II [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 28 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019061344738694CA532ABBCF382
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4G8
[eMMC] : FLASH_CID : 90014A483847346132A54C6982F334AB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xC3555188604FA3A6EFBF48B9F6425B21
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : QMobile
ProdName : J1
ProdModel : QMobile J1
Device : J1
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-n0.mp1-V1.0.2_tinno6737m.35.n_P126


[Read Ok] : preloader_v3913.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / v3913 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3162 MiB
Scatter saved to : E:\MT6737M__QMobile__QMobile_J1__J1__7.0__alps-mp-n0.mp1-V1.0.2_tinno6737m.35.n_P126\

All done!

Done!
Elapsed: 00:08:34
Reconnect Power/Cable!

shazzmob 04-07-2018 08:52

Quote:

Originally Posted by .::mustafa::. (Post 13065093)
chinese miracle ii [mtk module] v 1.58

operation : Read flash [ v1.58 ]

1. Power off phone , remove battery , insert back
2. Insert usb cable. In some cases require hold bootkey

wait for phone...
Phone found! [ 28 ]
sync...
Inital boot ok!
Bb_cpu_pid : 6737
bb_cpu_nme : [mediatek] mt6737m|mt6737_s00
bb_cpu_ext : 0xcb00 , 0x8a00 , 0x0000
processing brom stage
settings for brom configured!
Seccfgval : 0x01000000
bromver : 0x00ff
blversion : 0x0001
preloader : Active [ boot with pl ]
bootldrss : Signed with spreloader
processing da stage
da select done, will use mtk_allinone_da_v3.3001.00.00
sending and initialize da ...
Running da ver.4.2 on bbid : 0x9b
nand flash : Not installed
emmc flash : 484a019061344738694ca532abbcf382
initialize memory ...
Dram already initialized by preloader
dagent sent , init hw now
emmc flashic initialized
[emmc] : Flash_ven : 0x90 , oem : 014a
[emmc] : Flash_inf : [hynix] , 2a4g8
[emmc] : Flash_cid : 90014a483847346132a54c6982f334ab
[emmc] : Flash_brt : 0x00400000 , 0x00400000 , 0x00400000
[emmc] : Flash_len : 0x00000001d2000000
[emmc] : Flash_ucp : 7456 mib [emmc 8 gib]
dev rid : 0xc3555188604fa3a6efbf48b9f6425b21
int ram : 0x00020000
ext ram : 0x40000000 [1 gib]
boot type : Emmc_flash_boot
soc verify : C1
boot ok!

Reading flash content now ...

Xgpt : Normalize settings ok!

brand : Qmobile
prodname : J1
prodmodel : Qmobile j1
device : J1
androidver: 7.0
mtkxcpu : Mt6737m
mtkxprj : Alps-mp-n0.mp1-v1.0.2_tinno6737m.35.n_p126


[read ok] : Preloader_v3913.bin
[read ok] : Lk.bin
[read ok] : Boot.img
[read ok] : Recovery.img
[read ok] : Logo.bin
[read ok] : Secro.img
[read ok] : Tz1.img
[read ok] : Tz2.img
[read ok] : System.img
[read ok] : Cache.img
[read ok] : Userdata.img

[scatcfg] : Mt6737m / v1.1.2 / v3913 / emmc
android info saved
hwconfig info saved
fw size : 3162 mib
scatter saved to : E:\mt6737m__qmobile__qmobile_j1__j1__7.0__alps-mp-n0.mp1-v1.0.2_tinno6737m.35.n_p126\

all done!

Done!
Elapsed: 00:08:34
reconnect power/cable!

bro can you share yore da file????

ahmer5050 04-07-2018 09:23

Quote:

Originally Posted by shazzmob (Post 13065118)
bro can you share yore da file????

Try This One Bro.
https://mega.nz/#!k5oRGK7a!V2H0Hg-RU...oamXKHu5yi8dC4

raza ahmad 06-06-2018 13:28

Quote:

Originally Posted by .::Mustafa::. (Post 13065093)
Chinese Miracle II [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 28 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019061344738694CA532ABBCF382
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4G8
[eMMC] : FLASH_CID : 90014A483847346132A54C6982F334AB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xC3555188604FA3A6EFBF48B9F6425B21
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : QMobile
ProdName : J1
ProdModel : QMobile J1
Device : J1
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-n0.mp1-V1.0.2_tinno6737m.35.n_P126


[Read Ok] : preloader_v3913.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / v3913 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3162 MiB
Scatter saved to : E:\MT6737M__QMobile__QMobile_J1__J1__7.0__alps-mp-n0.mp1-V1.0.2_tinno6737m.35.n_P126\

All done!

Done!
Elapsed: 00:08:34
Reconnect Power/Cable!


if you have da file plz share if it is real

Yusuf Lawal 06-06-2018 18:21

Dear Sirs,

If you have good flash files and if you want to share it with other users please use IOS File Uploader Tool

Please do not upload password protected or damaged files, all of them will be deleted after upload.
Thank you !


All times are GMT +1. The time now is 19:43.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.11037 seconds with 6 queries

SEO by vBSEO