Repair imei ok, but after reset back invalid imei - GSM-Forum

turca · 01-07-2015, 00:48

Repair imei ok, but after reset back invalid imei

Operation : Check / Read Info [ v1.08 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 144 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 002C00BC009000660054000000000000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x007A , [Micron] NAND_MT29C4G48MAAHBAAKS
[NAND] : FLASH_DIE : 002C 00BC 0090 0066 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

NAND : Detecting structure now... Please, wait.
NAND : Structure detect done

Initial info read Ok!

Done!
Elapsed: 00:03:23
Reconnect Power/Cable!

Operation : Repair Security [ v1.08 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 144 ]
Sync...
Init Ok, waiting for phone ...
Reading initial info, wait...
Phone Info :
BB : MT6571, E00
HW : BENRUI71_E_JB7_GPRS_HW
SW : MOLY.WR8.W1315.MD.WG.MP.V38
MM : 2000.00.00
VR : 1.0
SN : 080501MT0123457068_224041 10
Security Info :
IMEI [1] : 356558151483648
IMEI [2] : Damaged or not exists
Read Ok!
Update IMEI[1] to : 35820090XXXXX50 done!

Done!
Elapsed: 00:01:25
Reconnect Power/Cable!

turca · 01-08-2015, 18:22

Waiting help with bug.

Dzirt · 01-08-2015, 18:44

Nothing can say yet. Will check and try make something, or make via ADB as well. At now I concentrated on eMMC phones. Some stuff will follow.

01-07-2015, 00:48	#1 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,379 Member: 211017 Status: Offline Thanks Meter: 312	Repair imei ok, but after reset back invalid imei Repair imei ok, but after reset back invalid imei Operation : Check / Read Info [ v1.08 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 144 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6571 BB_CPU_HW : CA00 BB_CPU_SW : 8D00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6571_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending NAND_ID : 002C00BC009000660054000000000000 eMMC_ID : 00000000000000000000000000000000 DA Stat : v4.2 on BBID : 0x8B DA Sent. Configure setting now ... NAND FlashIC initialized [NAND] : FLASH_VEN : 0x007A , [Micron] NAND_MT29C4G48MAAHBAAKS [NAND] : FLASH_DIE : 002C 00BC 0090 0066 0054 0000 0000 [NAND] : FLASH_LEN : 0x20000000 INT RAM : 0x00020000 EXT RAM : 0x10000000 BOOT TYPE : NAND_FLASH_BOOT SOC VERIFY : C1 Boot Ok! NAND : Detecting structure now... Please, wait. NAND : Structure detect done Initial info read Ok! Done! Elapsed: 00:03:23 Reconnect Power/Cable! Operation : Repair Security [ v1.08 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 144 ] Sync... Init Ok, waiting for phone ... Reading initial info, wait... Phone Info : BB : MT6571, E00 HW : BENRUI71_E_JB7_GPRS_HW SW : MOLY.WR8.W1315.MD.WG.MP.V38 MM : 2000.00.00 VR : 1.0 SN : 080501MT0123457068_224041 10 Security Info : IMEI [1] : 356558151483648 IMEI [2] : Damaged or not exists Read Ok! Update IMEI[1] to : 35820090XXXXX50 done! Done! Elapsed: 00:01:25 Reconnect Power/Cable!

01-08-2015, 18:22	#2 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,379 Member: 211017 Status: Offline Thanks Meter: 312	Waiting help with bug.

01-08-2015, 18:44	#3 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Nothing can say yet. Will check and try make something, or make via ADB as well. At now I concentrated on eMMC phones. Some stuff will follow.