Rivo B50 RDA cpu not supported - GSM-Forum

unlockworld · 05-28-2018, 17:00

Need to read cecurity code this phone what is solution

Operation : Check Device / Info
======= Settings
Settings : Read AllInfo is On
Settings : Full Boot disabled by default

Waiting phone ...
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
ClIntf : 0xFFFFFFFB
Init : 169FFD0C
Settings registers ...
1st boot Ok
==== CPU
CPU_ID : 0809 , rev : 0007
CPU_CN :
==== FLASH
FL_VEN : 0000 , rev : 0000
FL_CNM :
FL_CAP : 00000000
Initial : 99335D2B
Boot Done!

Elapsed: 00:00:10
Done
Reconnect Power/Cable!

unlockworld · 05-28-2018, 17:09

Problem solved with scr tool

1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x993B5D27
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Preparing PMT
Verifying PMT
Erasing 1474560 bytes

FileSystem format done!

Done!
Elapsed: 00:00:30

Reconnect Power/Cable!

05-28-2018, 17:00	#1 (permalink)
unlockworld No Life Poster Join Date: Dec 2010 Location: pakistan Posts: 855 Member: 1466124 Status: Offline Thanks Meter: 116	Rivo B50 RDA cpu not supported Need to read cecurity code this phone what is solution Operation : Check Device / Info ======= Settings Settings : Read AllInfo is On Settings : Full Boot disabled by default Waiting phone ... Connect battery, press and hold '0' button Connect USB cable and keep hold button, until phone will be detected ClIntf : 0xFFFFFFFB Init : 169FFD0C Settings registers ... 1st boot Ok ==== CPU CPU_ID : 0809 , rev : 0007 CPU_CN : ==== FLASH FL_VEN : 0000 , rev : 0000 FL_CNM : FL_CAP : 00000000 Initial : 99335D2B Boot Done! Elapsed: 00:00:10 Done Reconnect Power/Cable!

05-28-2018, 17:09	#2 (permalink)
unlockworld No Life Poster Join Date: Dec 2010 Location: pakistan Posts: 855 Member: 1466124 Status: Offline Thanks Meter: 116	Problem solved with scr tool 1. Insert USB cable 2. Wait when device show Charge icon 3. When device show StorageMode : Press '0' button for a 5 second! Wait for device ... Device Connected! BOOT_PWR0 : 0x00200000 BOOT_INIT : 0x993B5D27 BOOT_MODE : BOOTROM Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G MEMD for flsh_spi32m Branch: none Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ] Performing MemoryInit Selecting RL Sending RL Config : MemoryInit Config : Loader BOOT_MODE : RLOADER Boot IV : 0xFBA2A250 Boot done! Preparing PMT Verifying PMT Erasing 1474560 bytes FileSystem format done! Done! Elapsed: 00:00:30 Reconnect Power/Cable!