S660 boot phase#1 Failed on SP-Unlock - GSM-Forum

gesundheit · 06-09-2007, 06:21

Quote:

COM14 selected
Device: Philips S660
Checking data, wait...
Action: Unlock
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
In case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !

On/off boot baudrate autoselect: same error
tried to changed comport baudrate to no avail.
tested almost all settings: still same error

cable used: modified to infinity specs
KEYBOARD TOP
1.........18
7: Rx
8: Gnd
9: Tx

connected to rj45 pin2=pin7(fone connector)
rj45 pin3=pin9(fone connector)
rj45 pin 7=pin8(fone connector)

what's wrong with me

any suggestions?
TIA

btw i'm using the slim version of infinity with pure usb connection

**InfinitySupport** · 06-09-2007, 11:18

Hi,

try to change rx <-> tx wires

engendro · 11-08-2008, 18:06

is somewhat late, but you are serving, hold the power and do not let go and it is hooked to the phone software

Note: excuse my English but did not manage well

lucky

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6300 china error: boot phase#1 failed	ufsx002	Infinity-Box	1	01-20-2010 18:05
Benq-s660 sp-unlock and lock code here	ufuktakiadam	x6x and x7x Flashpatching	1	07-05-2009 19:36
error: boot phase#1 failed	aikonmani	Infinity-Box	2	03-24-2009 11:11
Fail To Sp Unlock C261	pixel	Infinity-Box	2	08-20-2006 19:06

06-09-2007, 11:18	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hi, try to change rx <-> tx wires

11-08-2008, 18:06	#3 (permalink)
engendro Freak Poster Join Date: Nov 2006 Posts: 196 Member: 389266 Status: Offline Thanks Meter: 17	is somewhat late, but you are serving, hold the power and do not let go and it is hooked to the phone software Note: excuse my English but did not manage well lucky