***MT6260 BLU JENNY TV 2.8 [User Report]***

[maomatrix]

MTK6260 BLU JENNY TV 2.8




FORMAT FS

Phone whit user password....

Operation : Format FileSystem [ v1.01 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 17 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 0817AD7C387E1AFBD2B781CA43753B5E
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00400000
SDS : 0x00000000 , 0x00000000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x003BA000-0x003FFFFF , LEN : 0x00046000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

WRITE IMEI [FOR SAME]

After FORMAT FS, IMEI remains blank, so is necessary to write it

Operation : Repair Security [ v1.01 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 17 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 0817AD7C387E1AFBD2B781CA43753B5E
BROM Protocol Version : 05
Setting Service Mode ...
Init Ok, waiting for phone ...
Phone Initial Info :
BB : MT6260
SW : MAUI.11B.W13.08.MP.V1.F52
HW : 60D_11B_HW
IMEI[1] read error
IMEI[2] info not exist
Update IMEI[1] to : 352361055764633
Update IMEI[2] to : 352361056964638
Done!

Done!
Elapsed: 00:00:38
Reconnect Power/Cable!

B.R.

MaoMaTriX

[maomatrix]

READ FULL FLASH [SO FAST]

Operation : Read Flash [ v1.01 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 17 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 0150EB25283D6F4FC4F6463576DC66AA
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 4000 1600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS : 0x00000000 , 0x00000000
Reading Flash Conent now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F52.bin
FileVersion : MAUI.11B.W13.08.MP.V1.F52
Saved to : C:\InfinityBox\CM2MTK\Read_out\HEXING60D_11B_PCB01 _gprs_MT6260_S00.MAUI_11B_W13_08_MP_V1_F52.bin

Done!
Elapsed: 00:00:55
Reconnect Power/Cable!

B.R.

MaoMaTriX

[YellowBoss]

@maomatrix
Please upload flash file somewhere if possible.
Thanks !

[maomatrix]

HERE FLASH !!!!

BLU JENNY TY_2.8