GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   SC7731 firmware error.. (https://forum.gsmhosting.com/vbb/f296/sc7731-firmware-error-2063477/)

iqballk 03-10-2016 11:39
SC7731 firmware error..
 
Code:
====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC v2.0 Loader Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name  : A1000
Model Brand : Lenovo
Model Device: A1000
AndrVersion : 5.0
BaseBand CPU: A1000
CompileDate : 9/6/2015 3:36:52 AM
Project Ver : A1000_USR_S26632_1509061131_SPRD7731_ROW
Model Ext  : Lenovo A1000

ExtraInfo : HWInfo not exists, normal phone
ExtraInfo : GSM Phone

Elapsed: 00:00:13
http://i63.tinypic.com/2hp1749.png

PAC file size is 2.45GB

JayDi 03-10-2016 15:48
http://forum.gsmhosting.com/vbb/f296...fixes-2062286/

iqballk 03-11-2016 12:43
Code:
Operation : Flash [ v1.16 ]

======= Flash
Files set for flashing :
[ MCU ] : A1000_USR_S29644_1510281850_SPRD7731_SINGLE_ROW.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : A1000_USR_S29644_1510281850_SPRD7731_SINGLE_ROW
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : boot_logo.bmp
File : boot_logo.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
File : oem.img

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x18 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : ERASE
Current ID  : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID  : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Error with code 0x0002
phone comes in dead . boot with SC7730..SC7731 emmc generic (alternative loader mode).

JayDi 03-11-2016 17:25
Alive by HW A1000 log :
Code:
Operation : Flash [ v1.16 ]

======= Flash
Files set for flashing :
[ MCU ] : A1000_USR_S29576_1510212227_SPRD7731_ROW.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : A1000_USR_S29576_1510212227_SPRD7731_ROW
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : boot_logo.bmp
File : boot_logo.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
File : oem.img

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x18 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : ERASE
Current ID  : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID  : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : BOOTLOGO
Current File : boot_logo.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : FASTBOOT_LOGO
Current File : boot_logo.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID  : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : OEM
Current File : oem.img
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:08:13

Reconnect Power/Cable!
Check battery, charge it completely by some other way, instead of phone ( cos dead phone will not charge battery in most cases )

IMRAN SHAIK 03-14-2016 08:10
lenovo a1000 flash success logo hang
 
http://www.youtube.com/watch?v=eC0MBk4e_-g



lenovo a1000 flash success logo hang:eek::eek::eek::eek::eek::eek:

tinotendag 10-04-2016 23:45
sm-g920 cert write done 100%
 
:)
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore.
7. Press 'Write NV DATA' if you need to restore NV backup.

Operation: Write CERT
Selected model: SM-G928C
Software version: 26.9

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G928C
Android version: 6.0.1
Product code: SM-G928CZKAXFA
Phone version: G928FXXU2BPDA
PDA version: G928CXXU2BPDB
CSC version: G928COJV2BPDA
CSC country code: SOUTH AFRICA
CSC sales code: XFA
HW version: MP 0.500
Phone SN: R58G80MY9DT
Modem board: SHANNON333
RF cal date: 20150811
IMEI:
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 48 10 AB 1F D4 07 00 00 00 00 00 00 00 00 00 00
Initialization AT RIL...
AT RIL stopped, restarting...
Checking for compatible phone and cert
Phone KEY ID: 0784
Checking certificate file... OK
KEY ID: 0784
Reading NV data... OK
Checking NV data... OK
Calculating... OK
Crypting CERT 1... OK
Writing NV data... OK
Rebooting phone... OK
Write CERT done

Done with Samsung Tool PRO v.26.9


All times are GMT +1. The time now is 09:44.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.12782 seconds with 7 queries

SEO by vBSEO