se x10 processor 6235B 2 sim imei problem

[Dasha2006]

Came the challenge does not work the second sim.
Spider was merged backup, then format - as a result do not work either sim,
* # 06 # - instead of imei void (on the same phone - 2 different normal).
Pouring some backup imei is not returned, spider or 2.68 or 2.69 or 2.70 Have not prescribe - error.
HyperTerminal port spider on the AT command writes ok, but the command change imei - error.
Infinity: "imei # 1 for 2-sim/one CPU " through type-2 ordered (type-1 did not see the type-3 wrote is not supported), recording "imei # 2 for 2-sim/one CPU " second imei written on top of the first.

COM9 [VCP0] selected
Module v3.26
Action: "repair imei"
recording method imei: Type-2
channel recording imei: imei # 2 for 2-sim/odin CPU
new imei: 355263410117969
Model: Autodetect 6205-6239 NOR
Checking data, wait ...
The device must be switched off!
Press and HOLD Power button now!
19200 autodetect
Initializing [6235:8 A04: 8A01] ...
CPU: MT6235
High speed downloads On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19,200, wait ...
Release Power button!
The device is found, wait ...
Hardware: MT6235, E04
Date: 2000.00.00
Version: 1.0
Version: H3506_V1.7_RELEASE
Version: Z35_09A_HW
structure definition # 2 ...
1 4 5 8 September 1911 12preduprezhdenie: wrong packet cs
Ready
90 byte (s) read
imei: 35526341001696
Contact Ok
structure definition # 2 ...
1 4 5 8 September 1911 12Gotov
90 byte (s) read
checking ...
the check is: 35526341011796
Completed, it took time: 17 sec
Unplug / plug the battery!

The result: one is prescribed and imei change, and the second is always empty, and as a consequence does not work the second sim!
Anybody got cured? And how? (MTK 6235B)

[InfinityHelp]

hello!

please try mode-2 for IMEI#2 change

[Dasha2006]

Thanks, but it works well only through the mode-2.
I write imei#2 - change 1-imei, and 2-imei is empty! : (

[Dasha2006]

up
Help me!
I have Infinity-box and Spiderman-box

[InfinityHelp]

hello!

try IMEI changing via Bluetooth, Mode-1
IMEI change without cable over Bluetooth link step-by-step tutorial - GSM-Forum

[Dasha2006]

Thank you all, Done!
Method:
through the engineering menu configurable UART:

1. TST-PS Config
UART2
AUTO

2. OPTIONS PS
UART1
AUTO

3. TST-L1 Config
NOT

below:

INFINITY-BOX:
Model: Autodetect 6228-6253 NAND

* recording method imei: Type-1 choose imei#1
phone off, press the RECORD and include your phone
1 imei - ready

recording method imei: Type-1 choose imei#2
phone off, press the RECORD and include your phone
2 imei - ready

[InfinityHelp]

hello!

yes, engeneering menu is another option for making phone detected in mode-1.