Sigmatel FXD6100 Usercode - GSM-Forum

Dodger · 02-07-2011, 13:34

Hello

I`ve sigmatel FXD6100 with unknown usercode. Fw is not supported (but already sent to support).

Is there any other chance to get Usercode/Reset it? Or do I have to wait for Update...

Haider Ali · 02-07-2011, 15:58

Not possible........

InfinityHelp · 02-07-2011, 21:39

hello!

did you try to make format FFS complete?

Dodger · 02-07-2011, 22:55

No... ithought I`d delete files on the phone. or is that wrong?

Dodger · 02-08-2011, 20:11

Formating FFS worked... but now I get "unlawful" on startup? What does this means?

InfinityHelp · 02-08-2011, 21:49

hello!

i have no idea...

Dodger · 02-09-2011, 15:56

I already sent Flash to your support... but no one seems to be interested?

I tried formatting FFS as I told... but formating FFS also deletes IMEIs.... the same happens if I flash other Firmware... even though Usercode is set to "1122" again with new/old FW... is there any chance you support new FW... or can I download "FFS-Content" and search for usercode (Ifinity-readouts are crypted...) ?

InfinityHelp · 02-09-2011, 21:10

hello!

which format method did you try?
safe or complete?

Dodger · 02-09-2011, 21:43

Both... even manual Format (where you can selebct Items to be deleted...).

I tried even other FW from support...

azadsoft · 02-10-2011, 17:10

* *983*7469# version
* *983*1688# batterie temperature
* *983*5391# keypad test
* *983*5651# phone reset and user code reset also
* *983*757# sim lock info
* *983*22387# master reset
* *983*2831# audio test
__________________try with this code.i think it will work.........

Dodger · 02-10-2011, 20:42

I cant enter codes... only Phonecode... _

InfinityHelp · 02-10-2011, 21:28

hello!

please show format FFS complete log.
maybe this phone has double CPU and you work with second (slave) one

Dodger · 02-12-2011, 17:14

COM3 [VCP0] selected
module v3.26
Action: reset settings ("format ffs")
Model: Autodetect 6205-6239 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:2603:0009
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: FXD-6100_01_V1.0.018_090421
Version: PCBAV2.1
detecting structure #2...
1 2 3 5 7 8 9 11 13 done
80 byte(s) read
imei: 35350303024878
connection Ok
building list...
done
items to clear: 141
warning: wrong packet cs
warning: wrong packet cs
items cleared: 141 of 141
building list...
done
items remains: 0
Finished, time used: 27 sec
Remove/Install battery now !

Here is log of FFS (Safe mode)

InfinityHelp · 02-13-2011, 19:47

hello!

i still insist on posting "Complete" format Log, not "safe"

Dodger · 02-16-2011, 22:49

COM7 [VCP0] selected
module v3.26
Device: Autodetect 6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset settings ("format ffs")
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:2603:0009
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
otp offset: 00FE0000
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
otp offset: 00FE0000
detecting chip #02 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
otp offset: 00FE0000
detecting chip #03 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
otp offset: 00FE0000
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
otp offset: 00FE0000
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
otp offset: 00FE0000
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: c:\Programme\InfinityBox\ChineseMiracle\backup_sec urity\id.3A10690F.[GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421.BIN_233E403E].rpl
====================
New firmware found (v.3.26, database date: 13.01.2011):
GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
device-id: 3A10690F
rom info ver: 05
sw version: GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421.BIN
project-id: FXD-6100_01_V1.0.018_090421, 3E403E23
code offset: 00000000
ffs offset/size [01]: 00E00000/00200000
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
firmware area: 00000000-00DFFFFF
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421__ffs...
file saved: C:\Programme\InfinityBox\ChineseMiracle\GINWAVE25_ 08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421__ffs_20110216-095829.B0E.bin
flash: 98000300000001:18E59F00000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 98000300000001:18E59F00000000
Finalization Done
file saved: c:\Programme\InfinityBox\ChineseMiracle\backup_sec urity\GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.F XD-6100_01_V1_0_018_090421__system_log_3A10690F_233E4 03E_20110216-095850.B0X.bin
Finished, time used: 4 min 50 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

Here we go

02-07-2011, 13:34	#1 (permalink)
Dodger Freak Poster Join Date: Aug 2004 Location: Germany Posts: 369 Member: 76018 Status: Offline Thanks Meter: 59	Sigmatel FXD6100 Usercode Hello I`ve sigmatel FXD6100 with unknown usercode. Fw is not supported (but already sent to support). Is there any other chance to get Usercode/Reset it? Or do I have to wait for Update...

02-09-2011, 21:10	#8 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! which format method did you try? safe or complete? Last edited by InfinityHelp; 02-09-2011 at 21:35.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Siemens C25 UserCode?	kostin	x1x to x45/x50	3	02-19-2002 23:28
mc930 usercode problem	bojans	Infineon C16X M51 & ARM7 M52 BASED	1	10-31-2001 11:22
How to unlock usercode Siemens S35 v18 ??	sp-lox	x1x to x45/x50	1	10-11-2001 07:34
Tool for usercode?	Blu3fish	Alcatel & TCL Old Models	3	01-14-2001 22:18
usercode on siemensc25	mobileinfo	x1x to x45/x50	0	05-24-1999 01:17

02-07-2011, 15:58	#2 (permalink)
Haider Ali Freak Poster Join Date: Apr 2008 Location: Pakistan Age: 38 Posts: 379 Member: 756333 Status: Offline Thanks Meter: 152	Not possible........

02-07-2011, 21:39	#3 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! did you try to make format FFS complete?

02-07-2011, 22:55	#4 (permalink)
Dodger Freak Poster Join Date: Aug 2004 Location: Germany Posts: 369 Member: 76018 Status: Offline Thanks Meter: 59	No... ithought I`d delete files on the phone. or is that wrong?

02-08-2011, 20:11	#5 (permalink)
Dodger Freak Poster Join Date: Aug 2004 Location: Germany Posts: 369 Member: 76018 Status: Offline Thanks Meter: 59	Formating FFS worked... but now I get "unlawful" on startup? What does this means?

02-08-2011, 21:49	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! i have no idea...

02-09-2011, 15:56	#7 (permalink)
Dodger Freak Poster Join Date: Aug 2004 Location: Germany Posts: 369 Member: 76018 Status: Offline Thanks Meter: 59	I already sent Flash to your support... but no one seems to be interested? I tried formatting FFS as I told... but formating FFS also deletes IMEIs.... the same happens if I flash other Firmware... even though Usercode is set to "1122" again with new/old FW... is there any chance you support new FW... or can I download "FFS-Content" and search for usercode (Ifinity-readouts are crypted...) ?

02-09-2011, 21:43	#9 (permalink)
Dodger Freak Poster Join Date: Aug 2004 Location: Germany Posts: 369 Member: 76018 Status: Offline Thanks Meter: 59	Both... even manual Format (where you can selebct Items to be deleted...). I tried even other FW from support...

02-10-2011, 17:10	#10 (permalink)
azadsoft Freak Poster Join Date: Mar 2007 Location: india.china Posts: 285 Member: 462514 Status: Offline Sonork: 100.1596836 Thanks Meter: 602	* 9837469# version * 9831688# batterie temperature * 9835391# keypad test * 9835651# phone reset and user code reset also * 983757# sim lock info * 98322387# master reset * 9832831# audio test __________________try with this code.i think it will work.........

02-10-2011, 20:42	#11 (permalink)
Dodger Freak Poster Join Date: Aug 2004 Location: Germany Posts: 369 Member: 76018 Status: Offline Thanks Meter: 59	I cant enter codes... only Phonecode... _

02-10-2011, 21:28	#12 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! please show format FFS complete log. maybe this phone has double CPU and you work with second (slave) one

02-12-2011, 17:14	#13 (permalink)
Dodger Freak Poster Join Date: Aug 2004 Location: Germany Posts: 369 Member: 76018 Status: Offline Thanks Meter: 59	COM3 [VCP0] selected module v3.26 Action: reset settings ("format ffs") Model: Autodetect 6205-6239 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6225:8A05:8A00]... CPU: MT6225 high speed boot On chip: 0001:2603:0009 status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6225,E05 Date: 2006.06.14 Version: 1.0 Version: FXD-6100_01_V1.0.018_090421 Version: PCBAV2.1 detecting structure #2... 1 2 3 5 7 8 9 11 13 done 80 byte(s) read imei: 35350303024878 connection Ok building list... done items to clear: 141 warning: wrong packet cs warning: wrong packet cs items cleared: 141 of 141 building list... done items remains: 0 Finished, time used: 27 sec Remove/Install battery now ! Here is log of FFS (Safe mode)

02-13-2011, 19:47	#14 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! i still insist on posting "Complete" format Log, not "safe"

02-16-2011, 22:49	#15 (permalink)
Dodger Freak Poster Join Date: Aug 2004 Location: Germany Posts: 369 Member: 76018 Status: Offline Thanks Meter: 59	COM7 [VCP0] selected module v3.26 Device: Autodetect 6205-6239 NOR Checking data, wait... advanced flash detection enabled Action: reset settings ("format ffs") ffs/eeprom backup enabled, it may takes several minutes ! ====> Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6225:8A05:8A00]... CPU: MT6225 high speed boot On chip: 0001:2603:0009 status: FF boot packet size: 0400 Release Power button now ! Boot Done ====> Initialize ... detecting chip #00 in region #00... flash: 98000300000001:18E59F00000000 flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb otp offset: 00FE0000 detecting chip #01 in region #00... flash: 98000300000001:18E59F00000000 flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb otp offset: 00FE0000 detecting chip #02 in region #00... flash: 98000300000001:18E59F00000000 flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb otp offset: 00FE0000 detecting chip #03 in region #00... flash: 98000300000001:18E59F00000000 flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb otp offset: 00FE0000 number of flash chip/regions detected: 04/01 Initialize Done ====> Set baud ... 115200 Set baud Done ====> Initialize bootcode ... Initialize bootcode Done ====> Check firmware integrity ... device parameters detection in progress... detecting chip #00 in region #00... flash: 98000300000001:18E59F00000000 flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb otp offset: 00FE0000 detecting chip #01 in region #00... flash: 98000300000001:18E59F00000000 flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb otp offset: 00FE0000 it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5 number of flash chip/regions detected: 01/01 total flash region size: 01000000 usb bootloader detect... .. usb bootloader detect (phase #2)... .. usb bootloader (chip) is absent searching rom info... search rom info finished rom info structure: [protected] type (05), 1 record(s) TCL-ID is absent startup code area #1 is Ok startup code area #1 backup saved: c:\Programme\InfinityBox\ChineseMiracle\backup_sec urity\id.3A10690F.[GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421.BIN_233E403E].rpl ==================== New firmware found (v.3.26, database date: 13.01.2011): GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421.BIN This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or http://4shared.com - include in your e-mail full text from phone back label (phone name etc.) ==================== rom info detection finished device-id: 3A10690F rom info ver: 05 sw version: GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421.BIN project-id: FXD-6100_01_V1.0.018_090421, 3E403E23 code offset: 00000000 ffs offset/size [01]: 00E00000/00200000 rom info structure: [protected] type (05), 1 record(s) TCL-ID is absent detecting ffs/eeprom area in 1 chip(s)... standard ffs/eeprom offset detected: 00E00000 standard ffs/eeprom offset confirmed: 00E00000 detecting ffs/eeprom size... ffs/eeprom size: 00200000 ffs/eeprom chip: 00 ffs/eeprom area: 00000000:00E00000-00FFFFFF firmware area: 00000000-00DFFFFF sec info (detailed) detection... searching sec info#1... . search sec info#1 finished Check firmware integrity Done ====> Check firmware content ... Check firmware content Done ====> Backup required data ... reading: GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421__ffs... file saved: C:\Programme\InfinityBox\ChineseMiracle\GINWAVE25_ 08A_GEMINI_PCB01_GPRS_MT6225_S00.FXD-6100_01_V1_0_018_090421__ffs_20110216-095829.B0E.bin flash: 98000300000001:18E59F00000000 Backup required data Done ====> Patch required data ... Patch required data Done ====> Special operation ... Special operation Done ====> Write ... Write Done ====> Finalization ... ffs formatting... flash: 98000300000001:18E59F00000000 Finalization Done file saved: c:\Programme\InfinityBox\ChineseMiracle\backup_sec urity\GINWAVE25_08A_GEMINI_PCB01_GPRS_MT6225_S00.F XD-6100_01_V1_0_018_090421__system_log_3A10690F_233E4 03E_20110216-095850.B0X.bin Finished, time used: 4 min 50 sec Remove/Install battery now ! File system has been modified ! It is need to press and HOLD phone "Power" button during long time (up to 1 min) to make phone Powered-On ! Here we go