ADIVASRO | 07-04-2017 12:42 | one plus frp Quote:
Originally Posted by JayDi
(Post 12547824)
World first and bla-bla-bla. Identify : Code:
Operation : Identify [ v1.14 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!
Brand : Xiaomi
ProdName : sagit
ProdModel : MI 6
Device : sagit
AndroidVer: 7.1.1
Manufact. : Xiaomi
SysPatch : NMF26X
QLMxCPU : MSM8998
Done!
Elapsed: 00:00:19
Reconnect Power/Cable! Factory FW Flashing : Code:
Loading firmware ...
Loading 6 program definition file(s) ...
Load Ok!
Operation : Flash [ v1.14 ]
ForceFlashing : Disabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!
Flash Chain : 90
Flashing now
Flashing : dummy.img
Flashing : misc.img
Flashing : logfs_ufs_8mb.bin
Flashing : recovery.img
Flashing : cache.img
Flashing : userdata.img
Flashing : gpt_main0.bin
Flashing : gpt_backup0.bin
Flashing : xbl.elf
Flashing : gpt_main1.bin
Flashing : gpt_backup1.bin
Flashing : xbl.elf
Flashing : gpt_main2.bin
Flashing : gpt_backup2.bin
Flashing : gpt_main3.bin
Flashing : gpt_backup3.bin
Flashing : dummy.img
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : pmic.elf
Flashing : pmic.elf
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : abl.elf
Flashing : abl.elf
Flashing : storsec.mbn
Flashing : storsec.mbn
Flashing : BTFM.bin
Flashing : logo.img
Flashing : adspso.bin
Flashing : splash.img
Flashing : boot.img
Flashing : NON-HLOS.bin
Flashing : cust.img
Flashing : system.img
Flashing : gpt_main4.bin
Flashing : gpt_backup4.bin
Flashing : gpt_main5.bin
Flashing : gpt_backup5.bin
Flash sequence completed!
Applying patches for storage # 0
Records : 26
Applying patches for storage # 1
Records : 26
Applying patches for storage # 2
Records : 26
Applying patches for storage # 3
Records : 26
Applying patches for storage # 4
Records : 26
Applying patches for storage # 5
Records : 26
Patch sequence completed!
BootConfig set to 0x01
Flashing done!
Done!
Elapsed: 00:04:41 FW reading : Code:
Operation : Read Flash [ v1.14 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!
Brand : Xiaomi
ProdName : sagit
ProdModel : MI 6
Device : sagit
AndroidVer: 7.1.1
Manufact. : Xiaomi
QLMxCPU : MSM8998
DevInfo : MSM8998__Xiaomi__Xiaomi__ANDR_v7.1.1__MI_6__sagit__sagit
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : misc.img
[Read Ok] : logfs.bin
[Read Ok] : persist.img
[Read Ok] : recovery.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main1.bin
[Read Ok] : xbl.elf
[Read Ok] : gpt_backup1.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : gpt_backup2.bin
[Read Ok] : gpt_main3.bin
[Read Ok] : ddr.bin
[Read Ok] : gpt_backup3.bin
[Read Ok] : gpt_main4.bin
[Read Ok] : devcfg.mbn
[Read Ok] : pmic.bin
[Read Ok] : rpm.mbn
[Read Ok] : hyp.mbn
[Read Ok] : tz.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : abl.elf
[Read Ok] : storesec.mbn
[Read Ok] : btfm.mbn
[Read Ok] : fs_gc.img
[Read Ok] : lsplash.img
[Read Ok] : adspso.bin
[Read Ok] : splash.img
[Read Ok] : boot.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : cust.img
[Read Ok] : system.img
[Read Ok] : gpt_backup4.bin
[Read Ok] : gpt_main5.bin
[Read Ok] : gpt_backup5.bin
Android Info saved!
Read finished!
Configuration : MSM8996 / UFS
Firmware Size : 3918 MiB
Done!
Elapsed: 00:08:18 Infinity FW flashing : Code:
Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : Xiaomi
Device Manufact.: Xiaomi
Device Model : sagit
Device CPU : MSM8998
Device IntName : sagit
Device Version : 7.1.1
CU_SWVer : Xiaomi
Device Compile : 04.05.2017 17:25:02
Device ExtInfo : MI 6
Load Ok!
Operation : Flash [ v1.14 ]
ForceFlashing : Disabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!
Flash Chain : 86
Flashing now
Flashing : gpt_main0.bin
Flashing : misc.img
Flashing : logfs.bin
Flashing : persist.img
Flashing : recovery.img
Flashing : cache.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Flashing : gpt_main1.bin
Flashing : xbl.elf
Flashing : gpt_backup1.bin
Flashing : gpt_main2.bin
Flashing : xbl.elf
Flashing : gpt_backup2.bin
Flashing : gpt_main3.bin
Flashing : gpt_backup3.bin
Flashing : gpt_main4.bin
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : pmic.bin
Flashing : pmic.bin
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : abl.elf
Flashing : abl.elf
Flashing : storesec.mbn
Flashing : storesec.mbn
Flashing : btfm.mbn
Flashing : lsplash.img
Flashing : adspso.bin
Flashing : splash.img
Flashing : boot.img
Flashing : NON-HLOS.bin
Flashing : cust.img
Flashing : system.img
Flashing : gpt_backup4.bin
Flashing : gpt_main5.bin
Flashing : gpt_backup5.bin
BootConfig set to 0x01
Flashing done!
Done! Elapsed: 00:05:42
Reconnect Power/Cable! Reset Settings : Code:
Operation : Reset Settings [ v1.14 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!
Repair block Ok!
Repair block Ok!
Repair block Ok!
Forced Fix Ok!
Done!
Elapsed: 00:00:20
Reconnect Power/Cable! Reset FRP : Code:
Operation : Reset Settings [ v1.14 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!
Remove FRP
Reset Ok!
Done!
Elapsed: 00:00:12 MemoryTool and rest operations supported as well. ;) | Operation : Reset Settings [ v1.14 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : E78EC7D8
ID_BLOCK_I : 0005E0E1
ID_BLOCK_E : 2A7041DB
ID_BLOCK_L : FF5C637BD668CE97EEE304F0F7D333EE
ID_BLOCK_L : 978631A02624A40D2C8CBA0C103CBD30
Use CM2 Internal Loader
Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!
Reconnect Power/Cable! |