GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 06-15-2017, 15:57   #1 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 15,938
Member: 462970
Status: Offline
Thanks Meter: 15,624
SnapDragon 835 ( MSM8998 ) Support with CM2QLM!


World first and bla-bla-bla.
Identify :
Code:
Operation : Identify [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!


Brand     : Xiaomi
ProdName  : sagit
ProdModel : MI 6
Device    : sagit
AndroidVer: 7.1.1
Manufact. : Xiaomi
SysPatch  : NMF26X
QLMxCPU   : MSM8998

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
Factory FW Flashing :
Code:
Loading firmware ... 
Loading 6 program definition file(s) ... 
Load Ok!

Operation : Flash [ v1.14 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Flash Chain : 90
Flashing now

Flashing : dummy.img
Flashing : misc.img
Flashing : logfs_ufs_8mb.bin
Flashing : recovery.img
Flashing : cache.img
Flashing : userdata.img
Flashing : gpt_main0.bin
Flashing : gpt_backup0.bin
Flashing : xbl.elf
Flashing : gpt_main1.bin
Flashing : gpt_backup1.bin
Flashing : xbl.elf
Flashing : gpt_main2.bin
Flashing : gpt_backup2.bin
Flashing : gpt_main3.bin
Flashing : gpt_backup3.bin
Flashing : dummy.img
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : pmic.elf
Flashing : pmic.elf
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : abl.elf
Flashing : abl.elf
Flashing : storsec.mbn
Flashing : storsec.mbn
Flashing : BTFM.bin
Flashing : logo.img
Flashing : adspso.bin
Flashing : splash.img
Flashing : boot.img
Flashing : NON-HLOS.bin
Flashing : cust.img
Flashing : system.img
Flashing : gpt_main4.bin
Flashing : gpt_backup4.bin
Flashing : gpt_main5.bin
Flashing : gpt_backup5.bin

Flash sequence completed!

Applying patches for storage # 0
Records : 26
Applying patches for storage # 1
Records : 26
Applying patches for storage # 2
Records : 26
Applying patches for storage # 3
Records : 26
Applying patches for storage # 4
Records : 26
Applying patches for storage # 5
Records : 26
Patch sequence completed!

BootConfig set to 0x01

Flashing done!

Done!
Elapsed: 00:04:41
FW reading :
Code:
Operation : Read Flash [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!


Brand     : Xiaomi
ProdName  : sagit
ProdModel : MI 6
Device    : sagit
AndroidVer: 7.1.1
Manufact. : Xiaomi
QLMxCPU   : MSM8998

DevInfo : MSM8998__Xiaomi__Xiaomi__ANDR_v7.1.1__MI_6__sagit__sagit

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : misc.img
[Read Ok] : logfs.bin
[Read Ok] : persist.img
[Read Ok] : recovery.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main1.bin
[Read Ok] : xbl.elf
[Read Ok] : gpt_backup1.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : gpt_backup2.bin
[Read Ok] : gpt_main3.bin
[Read Ok] : ddr.bin
[Read Ok] : gpt_backup3.bin
[Read Ok] : gpt_main4.bin
[Read Ok] : devcfg.mbn
[Read Ok] : pmic.bin
[Read Ok] : rpm.mbn
[Read Ok] : hyp.mbn
[Read Ok] : tz.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : abl.elf
[Read Ok] : storesec.mbn
[Read Ok] : btfm.mbn
[Read Ok] : fs_gc.img
[Read Ok] : lsplash.img
[Read Ok] : adspso.bin
[Read Ok] : splash.img
[Read Ok] : boot.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : cust.img
[Read Ok] : system.img
[Read Ok] : gpt_backup4.bin
[Read Ok] : gpt_main5.bin
[Read Ok] : gpt_backup5.bin

Android Info saved!
Read finished!
Configuration : MSM8996 / UFS
Firmware Size : 3918 MiB

Done!
Elapsed: 00:08:18
Infinity FW flashing :
Code:
Loading firmware ... 
Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : sagit
Device CPU      : MSM8998
Device IntName  : sagit
Device Version  : 7.1.1
CU_SWVer        : Xiaomi
Device Compile  : 04.05.2017 17:25:02
Device ExtInfo  : MI 6
Load Ok!

Operation : Flash [ v1.14 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Flash Chain : 86
Flashing now

Flashing : gpt_main0.bin
Flashing : misc.img
Flashing : logfs.bin
Flashing : persist.img
Flashing : recovery.img
Flashing : cache.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Flashing : gpt_main1.bin
Flashing : xbl.elf
Flashing : gpt_backup1.bin
Flashing : gpt_main2.bin
Flashing : xbl.elf
Flashing : gpt_backup2.bin
Flashing : gpt_main3.bin
Flashing : gpt_backup3.bin
Flashing : gpt_main4.bin
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : pmic.bin
Flashing : pmic.bin
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : abl.elf
Flashing : abl.elf
Flashing : storesec.mbn
Flashing : storesec.mbn
Flashing : btfm.mbn
Flashing : lsplash.img
Flashing : adspso.bin
Flashing : splash.img
Flashing : boot.img
Flashing : NON-HLOS.bin
Flashing : cust.img
Flashing : system.img
Flashing : gpt_backup4.bin
Flashing : gpt_main5.bin
Flashing : gpt_backup5.bin

BootConfig set to 0x01

Flashing done!

Done!
Elapsed: 00:05:42

Reconnect Power/Cable!
Reset Settings :
Code:
Operation : Reset Settings [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Repair block Ok!
Repair block Ok!
Repair block Ok!
Forced Fix Ok!

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!
Reset FRP :
Code:
Operation : Reset Settings [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:12
MemoryTool and rest operations supported as well.
  Reply With Quote
The Following 33 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 06-15-2017, 16:03   #2 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,708
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,553
World first and bla-bla-bla
  Reply With Quote
The Following 3 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 06-15-2017, 16:24   #3 (permalink)
No Life Poster
 
.:Sanjh Phoenix:.'s Avatar
 
Join Date: Mar 2012
Location: India
Posts: 1,288
Member: 1728736
Status: Offline
Sonork: 100.1615042
Thanks Meter: 1,088
Donate money to this user
YO YO @ JayDi We Love Cm2 And You
  Reply With Quote
Old 06-15-2017, 16:53   #4 (permalink)
No Life Poster
 
rebainoor's Avatar
 
Join Date: Feb 2006
Posts: 2,253
Member: 231728
Status: Offline
Thanks Meter: 1,295
boom boom boom this is a real world first not a bla bla bla .....
  Reply With Quote
Old 06-15-2017, 22:43   #5 (permalink)
Freak Poster
 
mashigo's Avatar
 
Join Date: Dec 2012
Location: SOUTH AFRICA
Posts: 231
Member: 1853465
Status: Offline
Sonork: 100.1659145
Thanks Meter: 17
this vession 1.14 is not installing pls help
  Reply With Quote
Old 06-15-2017, 22:52   #6 (permalink)
No Life Poster
 
sky73's Avatar
 
Join Date: Jan 2013
Location: gsmhosting
Age: 24
Posts: 638
Member: 1876736
Status: Online
Thanks Meter: 362
Quote:
Originally Posted by mashigo View Post
this vession 1.14 is not installing pls help
Wait upload complete: )
Then download it
  Reply With Quote
The Following User Says Thank You to sky73 For This Useful Post:
Old 06-15-2017, 23:44   #7 (permalink)
No Life Poster
 
hitech care's Avatar
 
Join Date: Nov 2012
Location: Ek India Happy Wala.. :-)
Posts: 2,561
Member: 1834832
Status: Offline
Thanks Meter: 1,233
Great Move Friend...Keep Rocking ...Keep Going

I Am Having Some Suggestion N Hope It Will Consider In Upcoming Future Update...

*Custom Flash Option For Qcom Module....
*Read/Write QCN In EDL Mode... [I Heard Some Paid Private Tools Have This So Better If Added In Cm2 As Now Days Phone Came With Bootloader Lock Not Easy To Root (For Diag. Enable)]
*Add IMEI N Ram Size Also Show In Info (Optional Only If Possible)
*Add App Manager Like MTK So We Can Remove Custom APK From System Or User Area.
*Add Oppo Flash (Encrypted Own Format) Oppo Factory File New Model (.OFP Files MTK/QCom) If U Need Files For Check Let Me Know..

Last edited by hitech care; 06-15-2017 at 23:50.
  Reply With Quote
Old 06-16-2017, 00:00   #8 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 15,938
Member: 462970
Status: Offline
Thanks Meter: 15,624
1. MemoryTool provide all what need.
2. Impossible for 90% devices, rest 10 with generic keys ( if they really so generic ) - not a way.
3. Not possible.
4. Will be.
5. Not have phones, so not have idea at all.
  Reply With Quote
The Following User Says Thank You to JayDi For This Useful Post:
Old 06-17-2017, 00:43   #9 (permalink)
Freak Poster
 
Join Date: May 2017
Posts: 192
Member: 2718897
Status: Offline
Thanks Meter: 32
How do I find the firehose file? Do I have to purchase an infinity box to get it?
  Reply With Quote
Old 06-17-2017, 02:01   #10 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 15,938
Member: 462970
Status: Offline
Thanks Meter: 15,624
Quote:
Originally Posted by elliwigy View Post
How do I find the firehose file? Do I have to purchase an infinity box to get it?
Infinity can use "firehose" files, but own files is encrypted and you can't use them without Infinity.
  Reply With Quote
Old 06-17-2017, 02:19   #11 (permalink)
Freak Poster
 
Join Date: May 2017
Posts: 192
Member: 2718897
Status: Offline
Thanks Meter: 32
do you happen to know where i can find the firehose file for a ufs snapdragon 835 msm8998 ddr elf? i am needing it to flash in edl mode using QFIL on an S8+ (G955U)
  Reply With Quote
Old 06-17-2017, 02:23   #12 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 15,938
Member: 462970
Status: Offline
Thanks Meter: 15,624
Quote:
Originally Posted by elliwigy View Post
do you happen to know where i can find the firehose file for a ufs snapdragon 835 msm8998 ddr elf? i am needing it to flash in edl mode using QFIL on an S8+ (G955U)
Nowhere. Except a try to steal it from factory in south korea. Let us know results after
  Reply With Quote
Old 06-17-2017, 02:52   #13 (permalink)
Freak Poster
 
Join Date: May 2017
Posts: 192
Member: 2718897
Status: Offline
Thanks Meter: 32
Quote:
Originally Posted by JayDi View Post
Nowhere. Except a try to steal it from factory in south korea. Let us know results after
Would you happen to know a good way to flash files in EDL mode? Preferably one that doesn't involve having the firehose elf lol or any boxes as I do not have any at the moment...

Keep in mind I do have ODIN and Comsey ODIN but I am specifically referencing flashing in EDL mode.. All the programs so far seem to require the program/elf file to be flashed while the device in EDL.

It's also a Sammy phone so it does not contain fastboot as we all know it lol. I did however see over on XD A on the Axon 7 device they were able to use EDL to pretty much flash what they want, even TWRP on a locked bootloader.. They used a modified fastboot that essentially can only pull the boot/recovery or flash boot/recovery but it does not work on the S8 (different devices I suppose?)
  Reply With Quote
Old 07-04-2017, 13:42   #14 (permalink)
Freak Poster
 
Join Date: Jan 2009
Posts: 299
Member: 956406
Status: Online
Thanks Meter: 42
one plus frp

Quote:
Originally Posted by JayDi View Post
World first and bla-bla-bla.
Identify :
Code:
Operation : Identify [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!


Brand     : Xiaomi
ProdName  : sagit
ProdModel : MI 6
Device    : sagit
AndroidVer: 7.1.1
Manufact. : Xiaomi
SysPatch  : NMF26X
QLMxCPU   : MSM8998

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
Factory FW Flashing :
Code:
Loading firmware ... 
Loading 6 program definition file(s) ... 
Load Ok!

Operation : Flash [ v1.14 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Flash Chain : 90
Flashing now

Flashing : dummy.img
Flashing : misc.img
Flashing : logfs_ufs_8mb.bin
Flashing : recovery.img
Flashing : cache.img
Flashing : userdata.img
Flashing : gpt_main0.bin
Flashing : gpt_backup0.bin
Flashing : xbl.elf
Flashing : gpt_main1.bin
Flashing : gpt_backup1.bin
Flashing : xbl.elf
Flashing : gpt_main2.bin
Flashing : gpt_backup2.bin
Flashing : gpt_main3.bin
Flashing : gpt_backup3.bin
Flashing : dummy.img
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : pmic.elf
Flashing : pmic.elf
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : abl.elf
Flashing : abl.elf
Flashing : storsec.mbn
Flashing : storsec.mbn
Flashing : BTFM.bin
Flashing : logo.img
Flashing : adspso.bin
Flashing : splash.img
Flashing : boot.img
Flashing : NON-HLOS.bin
Flashing : cust.img
Flashing : system.img
Flashing : gpt_main4.bin
Flashing : gpt_backup4.bin
Flashing : gpt_main5.bin
Flashing : gpt_backup5.bin

Flash sequence completed!

Applying patches for storage # 0
Records : 26
Applying patches for storage # 1
Records : 26
Applying patches for storage # 2
Records : 26
Applying patches for storage # 3
Records : 26
Applying patches for storage # 4
Records : 26
Applying patches for storage # 5
Records : 26
Patch sequence completed!

BootConfig set to 0x01

Flashing done!

Done!
Elapsed: 00:04:41
FW reading :
Code:
Operation : Read Flash [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!


Brand     : Xiaomi
ProdName  : sagit
ProdModel : MI 6
Device    : sagit
AndroidVer: 7.1.1
Manufact. : Xiaomi
QLMxCPU   : MSM8998

DevInfo : MSM8998__Xiaomi__Xiaomi__ANDR_v7.1.1__MI_6__sagit__sagit

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : misc.img
[Read Ok] : logfs.bin
[Read Ok] : persist.img
[Read Ok] : recovery.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main1.bin
[Read Ok] : xbl.elf
[Read Ok] : gpt_backup1.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : gpt_backup2.bin
[Read Ok] : gpt_main3.bin
[Read Ok] : ddr.bin
[Read Ok] : gpt_backup3.bin
[Read Ok] : gpt_main4.bin
[Read Ok] : devcfg.mbn
[Read Ok] : pmic.bin
[Read Ok] : rpm.mbn
[Read Ok] : hyp.mbn
[Read Ok] : tz.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : abl.elf
[Read Ok] : storesec.mbn
[Read Ok] : btfm.mbn
[Read Ok] : fs_gc.img
[Read Ok] : lsplash.img
[Read Ok] : adspso.bin
[Read Ok] : splash.img
[Read Ok] : boot.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : cust.img
[Read Ok] : system.img
[Read Ok] : gpt_backup4.bin
[Read Ok] : gpt_main5.bin
[Read Ok] : gpt_backup5.bin

Android Info saved!
Read finished!
Configuration : MSM8996 / UFS
Firmware Size : 3918 MiB

Done!
Elapsed: 00:08:18
Infinity FW flashing :
Code:
Loading firmware ... 
Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : sagit
Device CPU      : MSM8998
Device IntName  : sagit
Device Version  : 7.1.1
CU_SWVer        : Xiaomi
Device Compile  : 04.05.2017 17:25:02
Device ExtInfo  : MI 6
Load Ok!

Operation : Flash [ v1.14 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Flash Chain : 86
Flashing now

Flashing : gpt_main0.bin
Flashing : misc.img
Flashing : logfs.bin
Flashing : persist.img
Flashing : recovery.img
Flashing : cache.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Flashing : gpt_main1.bin
Flashing : xbl.elf
Flashing : gpt_backup1.bin
Flashing : gpt_main2.bin
Flashing : xbl.elf
Flashing : gpt_backup2.bin
Flashing : gpt_main3.bin
Flashing : gpt_backup3.bin
Flashing : gpt_main4.bin
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : pmic.bin
Flashing : pmic.bin
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : abl.elf
Flashing : abl.elf
Flashing : storesec.mbn
Flashing : storesec.mbn
Flashing : btfm.mbn
Flashing : lsplash.img
Flashing : adspso.bin
Flashing : splash.img
Flashing : boot.img
Flashing : NON-HLOS.bin
Flashing : cust.img
Flashing : system.img
Flashing : gpt_backup4.bin
Flashing : gpt_main5.bin
Flashing : gpt_backup5.bin

BootConfig set to 0x01

Flashing done!

Done!
Elapsed: 00:05:42

Reconnect Power/Cable!
Reset Settings :
Code:
Operation : Reset Settings [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Repair block Ok!
Repair block Ok!
Repair block Ok!
Forced Fix Ok!

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!
Reset FRP :
Code:
Operation : Reset Settings [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : 15249608
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : F6EEF67413F8D2AB169CBE7003F92D03
ID_BLOCK_L : E069324554247B394AB883B12F8AA601
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUDG8V1EE-B0C1 0200
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:12
MemoryTool and rest operations supported as well.
Operation : Reset Settings [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : E78EC7D8
ID_BLOCK_I : 0005E0E1
ID_BLOCK_E : 2A7041DB
ID_BLOCK_L : FF5C637BD668CE97EEE304F0F7D333EE
ID_BLOCK_L : 978631A02624A40D2C8CBA0C103CBD30
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!
  Reply With Quote
Old 08-19-2017, 14:03   #15 (permalink)
No Life Poster
 
sirnavid2010's Avatar
 
Join Date: May 2008
Location: persian
Age: 39
Posts: 3,700
Member: 777729
Status: Offline
Sonork: 100.1616470
Thanks Meter: 804
hi need test point or edl cable or witout edl cable connect ?
  Reply With Quote
The Following User Says Thank You to sirnavid2010 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 09:15.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.51479 seconds with 7 queries

SEO by vBSEO