.::Successful Story For MTK Secure Boot Starts::. - Page 22 - GSM-Forum

Fragga · 04-14-2018, 19:19

Quote:

Originally Posted by amanvir

I just download and replaced this new update for MTK_AllInOne_DA_SP-k10a40 from support area which is uploaded on March-16-2018 and after that see the result below.....

Code:

Chinese Miracle II  [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 38 ]
Sync...
Sync Ok, read regs...
Initial Register Read Failed (HW/Connection Error)
Boot Error!

Operation Failed
Elapsed: 00:00:03
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 39 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 0000
BB_CPU_HW : 0000
BB_CPU_SW : 0000
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MTxxx
BROM Protocol Version : 05
Setting...
RTC/PowerLatch Settings Failed #1 (HW/Connection Error)
Boot Error!

Operation Failed
Elapsed: 00:00:11
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 39 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 450100444C32303136013F15E4A4649F
Initialize Memory ... 

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:07
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 39 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 450100444C32303136013F15E4A4649F
Initialize Memory ... 

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 38 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:10
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 39 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 450100444C32303136013F15E4A4649F
Initialize Memory ... 

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:07
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 39 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 450100444C32303136013F15E4A4649F
Initialize Memory ... 

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 39 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 450100444C32303136013F15E4A4649F
Initialize Memory ... 

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 38 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:11
Reconnect Power/Cable!

Which phone are you trying to service? Search for the DA of that phone on Support, if you can't find it, then you can try other DA, it is not like the latest uploaded file can do ALL phones, NO SIR!! You have to try many DA until you find the one that works for your phone

gracy_elec · 04-14-2018, 20:29

Hello I would like to say always post original infinity da file logs this logs is after da change and you using da file which is coded for MT6735/MT6735M so it will not work some old MT6580 work but not new MT6580 and one more thing I would like to say MT6580 new da file is not on iOS support area

Good Luck

faisal05 · 04-15-2018, 08:40

please can some one upload on forum hisense f10 da file

i did not find .....?

faisal05 · 04-17-2018, 06:19

i need hisense f10 boot file plz i did not find even on support area plz upload any one

i alredy tested many files but no sucess

here is log,

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:04
Reconnect Power/Cable!

Yusuf Lawal · 04-21-2018, 18:21

COOLPAD 8297 (INFINIX HOT V4 CLONE)
Card found : S/N : A6936825 , v0136
Chinese Miracle II [MTK module] v 1.58

Start at : [4/21/2018 / 5:57:54 PM]
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...

[DA_ERROR] : 00110000
Boot Error!

Operation Failed
Elapsed: 00:00:12
Reconnect Power/Cable!

PLEASE HELP ME FOR DA FILE

maxcer24 · 04-23-2018, 18:10

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:02
Reconnect Power/Cable!

Oppo_Tool · 04-23-2018, 18:40

Quote:

Originally Posted by maxcer24

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:02
Reconnect Power/Cable!

Hello can you will try to connect the phone while pressing both volume key till the operation end or volume up key check it if works post success log if not then tell will try to find some other options

elbasri73 · 04-27-2018, 13:55

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 14 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2017-06-20.16:16
Sending and initialize DA ...

[DA_ERROR] : 00007017
Boot Error!

Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable!

AQEEL22 · 05-02-2018, 11:57

Card found : S/N : CD543F2F , v0135
Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6580 , Project : d5110_qmobile , Storage : EMMC
Files found : 9 , Set to Flash : 8
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 47 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : NOT INSTALLED
Initialize Memory ...

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0xC40B0000
EMICFG_RET_FAILED
CodeDefine : DA_DEVICE_NOT_FOUND
Boot Error!

Operation Failed
Elapsed: 00:00:21
Reconnect Power/Cable!

what is this prob please help

sobujmolla · 05-03-2018, 17:04

No permission to downland bro thanks fix it

InfinityHelp · 05-03-2018, 19:34

Quote:

Originally Posted by sobujmolla

No permission to downland bro thanks fix it

you can download files from support area

InfinityHelp · 05-03-2018, 19:35

tools for DA files - http://forum.gsmhosting.com/vbb/f296...-58-a-2394792/

reports and suggestions are welcome

khanjan · 05-05-2018, 10:10

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 199 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!

Operation Failed
Elapsed: 00:00:26
Reconnect Power/Cable!

gracy_elec · 05-05-2018, 10:29

HELLO @khanjan YOUR PHONE CPU ALLREADY SUPPORT IN NEW UPDATE HERE IS THE LINK DOWNLOAD AND INSTALL THE NEW UPDATE SETUP CONNECT PHONE AND POST SUCCESS LOGS
LINK : http://dl1.infinity-box.com/download...T2_v2.00-r2.7z

GOOD LUCK

LEENO · 05-07-2018, 14:13

Quote:

Originally Posted by gracy_elec

HUAWEI LUA L21 MT6735 SECURE BOOT DA FILES

HERE IS YOUR FILE BUT THIS FILE IS MODIFIED SO YOU CANT FLASH IF YOU TRY TO FLASH YOUR PHONE WILL BRICK THIS FILE CAN BE USE FOR READ INFO,READ USER LOCK,READ PATTERN LOCK,REMOVE FRP

LINK : https://drive.google.com/open?id=1l7...bQ3A3U3qdv7xWB

1)NEED TO CHANGE DA FILES IN BOOT FOLDER AND MT6735M_Android_scatter.txt FILE IN FLASH TAB
2)VERY IMPORTAINT BEFORE DO ANY OPREATION MAKE READ INFO
3)NEED TO PRESS VOL "+" &"-" TILL THE END OPREATION AND YOU WILL SUCCESS
4)POST LOG OPREATION
5)IF ANY PROBLEM I CAN HELP YOU OK

GOOD LUCK

please authorize my email for download [email protected]

can i use this loader for TAG-L01?

04-23-2018, 18:10	#321 (permalink)
maxcer24 Insane Poster Join Date: Dec 2004 Location: Peru Callao Age: 45 Posts: 91 Member: 100918 Status: Offline Thanks Meter: 13	EKS S5US frp Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 15 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:02 Reconnect Power/Cable!

04-27-2018, 13:55	#323 (permalink)
elbasri73 Freak Poster Join Date: Sep 2006 Location: morrocco Posts: 149 Member: 345974 Status: Offline Thanks Meter: 23	1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 14 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x05000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : LOCKED with CERT Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.2017-06-20.16:16 Sending and initialize DA ... [DA_ERROR] : 00007017 Boot Error! Operation Failed Elapsed: 00:00:05 Reconnect Power/Cable! Last edited by elbasri73; 04-27-2018 at 14:04.

04-14-2018, 20:29	#317 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	Hello I would like to say always post original infinity da file logs this logs is after da change and you using da file which is coded for MT6735/MT6735M so it will not work some old MT6580 work but not new MT6580 and one more thing I would like to say MT6580 new da file is not on iOS support area Good Luck

04-15-2018, 08:40	#318 (permalink)
faisal05 Insane Poster Join Date: Aug 2014 Posts: 77 Member: 2234872 Status: Offline Thanks Meter: 4	please can some one upload on forum hisense f10 da file i did not find .....?

04-17-2018, 06:19	#319 (permalink)
faisal05 Insane Poster Join Date: Aug 2014 Posts: 77 Member: 2234872 Status: Offline Thanks Meter: 4	i need hisense f10 boot file plz i did not find even on support area plz upload any one i alredy tested many files but no sucess here is log, 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 15 ] Sync... Inital Boot Ok! BB_CPU_PID : 6735 BB_CPU_NME : [MediaTek] MT6735_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x05000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : LOCKED with CERT Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:04 Reconnect Power/Cable!

04-21-2018, 18:21	#320 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,591 Member: 1677653 Status: Offline Thanks Meter: 2,769	COOLPAD 8297 (INFINIX HOT V4 CLONE) Card found : S/N : A6936825 , v0136 Chinese Miracle II [MTK module] v 1.58 Start at : [4/21/2018 / 5:57:54 PM] Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 21 ] Sync... Inital Boot Ok! BB_CPU_PID : 6592 BB_CPU_NME : [MediaTek] MT6592_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... [DA_ERROR] : 00110000 Boot Error! Operation Failed Elapsed: 00:00:12 Reconnect Power/Cable! PLEASE HELP ME FOR DA FILE

05-02-2018, 11:57	#324 (permalink)
AQEEL22 Major Poster Join Date: May 2009 Posts: 40 Member: 1037764 Status: Offline Sonork: AQEEL22 Thanks Meter: 1	Card found : S/N : CD543F2F , v0135 Chinese Miracle II [MTK module] v 1.58 Scatter Load Ok , BaseBand : MT6580 , Project : d5110_qmobile , Storage : EMMC Files found : 9 , Set to Flash : 8 Ready to Flash! Operation : Flash [ v1.58 ] ======= Flash 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 47 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x9C NAND Flash : NOT INSTALLED eMMC Flash : NOT INSTALLED Initialize Memory ... [DA_ERROR] : DRAM Configure failed! ErroCode : 0xC40B0000 EMICFG_RET_FAILED CodeDefine : DA_DEVICE_NOT_FOUND Boot Error! Operation Failed Elapsed: 00:00:21 Reconnect Power/Cable! what is this prob please help

05-03-2018, 17:04	#325 (permalink)
sobujmolla Crazy Poster Join Date: Nov 2017 Posts: 57 Member: 2774044 Status: Offline Thanks Meter: 8	No permission to downland bro thanks fix it

05-03-2018, 19:35	#327 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	tools for DA files - http://forum.gsmhosting.com/vbb/f296...-58-a-2394792/ reports and suggestions are welcome

05-05-2018, 10:10	#328 (permalink)
khanjan Major Poster Join Date: Jan 2012 Location: Karachi Pakistan Posts: 45 Member: 1712187 Status: Offline Thanks Meter: 8	Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 199 ] Sync... Inital Boot Ok! BB_CPU_PID : 6755 BB_CPU_NME : [MediaTek] Helio[P10]\|MT6755_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... DAgent configured successfully Connection agent : BROM [DA_ERROR] : DRAM Configure failed! ErroCode : 0x2122 EMICFG_NOT_ACCEPTED_CONFIG Boot Error! Operation Failed Elapsed: 00:00:26 Reconnect Power/Cable!

05-05-2018, 10:29	#329 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	HELLO @khanjan YOUR PHONE CPU ALLREADY SUPPORT IN NEW UPDATE HERE IS THE LINK DOWNLOAD AND INSTALL THE NEW UPDATE SETUP CONNECT PHONE AND POST SUCCESS LOGS LINK : http://dl1.infinity-box.com/download...T2_v2.00-r2.7z GOOD LUCK