.::Successful Story For MTK Secure Boot Starts::. - Page 28 - GSM-Forum

Nicogalan · 09-18-2018, 18:53

Quote:

Originally Posted by YellowBoss

CM2MT2 software is for new CPU but for older models you should use CM2MTK

the AUTH option is not supported on old version, could you please add??

or, allow us to use same cpu please.

thanks

Misha2112 · 10-16-2018, 12:41

mt6572 working 100%,please add other cpu.
With da file not working any models,please add cpu supporter how mt6572

Misha2112 · 10-17-2018, 10:49

I am sorry working cm mtk v1.58
Big thanks for works.

iball · 11-05-2018, 16:23

need oppo a71 cph1717 boot file cm2
geating this error any one have boot fle
[DA_ERROR] : Correct BOOT CONFIGURATION not found for target!

Yusuf Lawal · 11-05-2018, 16:51

Quote:

Originally Posted by iball

need oppo a71 cph1717 boot file cm2
geating this error any one have boot fle
[DA_ERROR] : Correct BOOT CONFIGURATION not found for target!

post full log from infinity cm2

Abzal · 12-04-2018, 07:16

VERTEX IMPRESS SUN 4G SECURE BOOT DA FILES
https://yadi.sk/d/oAmrWTELbd1nOg

Code:

Operation : Identify [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...

  BROM  : 0x00007017 : DA SEND ERROR!
  ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
  INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO type!

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!


Operation : Identify [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : PRELOADER PORT
MODE : Vertex : Sun | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 150100463732324D4200AE51D00F0305
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100463732324D4200AE51D00F2305
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : F722MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00080000 [ 512,00 KB ]
              USER   : 0x1D2000000 [ 7,28 GB ]

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x40000000 [ 1,00 GB ]

        CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 95EC77E670CAC84BD8629DEA277ED385

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : NRD90M
Display ID     : HW1.R1.V07
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-09-05
Build Time     : 1509089732
Product Model  : Sun
Product Brand  : Vertex
Product Name   : Sun
Product Device : Sun
Product Board  : Sun
Product Manfct : Vertex
Board Platform : mt6737m
Product Info   : Sun

USERDATA : PLAIN ( NOT encrypted )


Done!
Elapsed: 00:00:16

tufanbd · 12-05-2018, 17:08

Lava iris 88 factory reset
I have seem problem please help
agent : selected agent doesn't have required configuration! check and select correct settings for your device!

tufanbd · 12-05-2018, 17:19

agent : selected agent doesn't have required configuration! check and select correct settings for your device! Please help..

zebafridi · 12-09-2018, 11:40

CCIT Touch Happiness P10Pro SECURE BOOT DA FILE Need

Stylo_GSM · 02-03-2019, 21:36

HI
Need Meizu M6 File please
Wait for phone...
Phone found! [ 43 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x07000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : LOCKED with SLA
Processing DA stage

[DA_ERROR] : Correct BOOT CONFIGURATION not found for target!
Try Re-Install CM2MTK module!
Boot Error!

Operation Failed
Elapsed: 00:00:04
Reconnect Power/Cable!

vovatlms · 02-12-2019, 11:39

HUAWEI LUA L21 MT6735
Read Info

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065314738F50F07052B430C25
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505070FF5250CA32B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x2F96E7535F35AD7B78D89201752FE93F
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : HUAWEI
ProdName : LUA-L21
ProdModel : HUAWEI LUA-L21
Device : HWLUA-L6735
AndroidVer: 5.1
MTKxCPU : MT6735
MTKxPRJ : ALPS.L1.MP3.V2.95_OT6735M.35GU.LU.L1_P1

SECURITY :
IMEI_SW [1] : 863607030835779
IMEI_SW [2] : 863607033335777
BTMAC Addr : F043475333F6
WiFi MAC : F04347564136

MODEM :
BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V48_P10_1_lwg _1

EXTRA :
LCD : Not info available

LCD Res : 854x480
TOUCH [0] : GT1XX
CAM [0] : ov5648_mipi_raw
CAM [1] : gc2355_mipi_raw
CAM [2] : sp2508_mipi_raw
CAM [3] : hi545_mipi_raw
MODEM : mt6735_sp_lwg_dsds_c2kirat_prod
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:23
Reconnect Power/Cable!

rafee_baba · 05-26-2019, 12:54

MTK Secure Boot File
https://www.youtube.com/watch?v=H_el0OemsbU

bilal khan12345 · 06-26-2019, 16:26

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 19 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:04
Reconnect Power/Cable!

Yusuf Lawal · 06-26-2019, 16:48

Quote:

Originally Posted by bilal khan12345

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 19 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:04
Reconnect Power/Cable!

Try use cm2mt2 v2.06

bilal khan12345 · 06-27-2019, 09:25

Quote:

Originally Posted by Yusuf Lawal

Try use cm2mt2 v2.06

i also try but same error set is hang on 2nd samsung logo efs ok and in recovery no error and also flash with diffrent firmwares but no luck any one have any idea????/

11-05-2018, 16:23	#409 (permalink)
iball Junior Member Join Date: Jun 2012 Location: pakistan Posts: 2 Member: 1766893 Status: Offline Sonork: iball Thanks Meter: 1	oppo a71 DA-error need oppo a71 cph1717 boot file cm2 geating this error any one have boot fle [DA_ERROR] : Correct BOOT CONFIGURATION not found for target!

06-26-2019, 16:26	#418 (permalink)
bilal khan12345 Freak Poster Join Date: Sep 2014 Location: islamabad pakistan Age: 39 Posts: 227 Member: 2266425 Status: Offline Thanks Meter: 58	this info was from samsung grand prime+G532f required da file 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 19 ] Sync... Inital Boot Ok! BB_CPU_PID : 6735 BB_CPU_NME : [MediaTek] MT6735_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x05000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : LOCKED with CERT Processing DA stage DA Select done, will use SecMode DA Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:04 Reconnect Power/Cable!

10-16-2018, 12:41	#407 (permalink)
Misha2112 Major Poster Join Date: Dec 2013 Location: Turkmenistan,Mary Posts: 42 Member: 2079059 Status: Offline Thanks Meter: 4	mt6572 working 100%,please add other cpu. With da file not working any models,please add cpu supporter how mt6572

10-17-2018, 10:49	#408 (permalink)
Misha2112 Major Poster Join Date: Dec 2013 Location: Turkmenistan,Mary Posts: 42 Member: 2079059 Status: Offline Thanks Meter: 4	I am sorry working cm mtk v1.58 Big thanks for works.

12-05-2018, 17:08	#412 (permalink)
tufanbd Junior Member Join Date: Oct 2015 Location: kushtia.bangladesh Posts: 6 Member: 2471665 Status: Offline Thanks Meter: 2	Lava iris 88 factory reset I have seem problem please help agent : selected agent doesn't have required configuration! check and select correct settings for your device!

12-05-2018, 17:19	#413 (permalink)
tufanbd Junior Member Join Date: Oct 2015 Location: kushtia.bangladesh Posts: 6 Member: 2471665 Status: Offline Thanks Meter: 2	agent : selected agent doesn't have required configuration! check and select correct settings for your device! Please help..

12-09-2018, 11:40	#414 (permalink)
zebafridi Freak Poster Join Date: Dec 2014 Location: KPK Age: 34 Posts: 293 Member: 2304199 Status: Offline Sonork: 100.1656573 Thanks Meter: 203	CCIT Touch Happiness P10Pro SECURE BOOT DA FILE Need

02-03-2019, 21:36	#415 (permalink)
Stylo_GSM No Life Poster Join Date: Sep 2005 Location: UK, London Age: 35 Posts: 2,236 Member: 177235 Status: Offline Sonork: 111568 Thanks Meter: 138	HI Need Meizu M6 File please Wait for phone... Phone found! [ 43 ] Sync... Inital Boot Ok! BB_CPU_PID : 6755 BB_CPU_NME : [MediaTek] Helio[P10]\|MT6755_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x07000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : LOCKED with SLA Processing DA stage [DA_ERROR] : Correct BOOT CONFIGURATION not found for target! Try Re-Install CM2MTK module! Boot Error! Operation Failed Elapsed: 00:00:04 Reconnect Power/Cable!

02-12-2019, 11:39	#416 (permalink)
vovatlms Junior Member Join Date: Jan 2009 Posts: 17 Member: 951910 Status: Offline Thanks Meter: 3	HUAWEI LUA L21 MT6735 Read Info Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 7 ] Sync... Inital Boot Ok! BB_CPU_PID : 6737 BB_CPU_NME : [MediaTek] MT6737M\|MT6737_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x93 NAND Flash : NOT INSTALLED eMMC Flash : 484A019065314738F50F07052B430C25 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x90 , OEM : 014A [eMMC] : FLASH_INF : [HYNIX] , e1G8 [eMMC] : FLASH_CID : 90014A483847316505070FF5250CA32B [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x00000001D2000000 [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB] DEV RID : 0x2F96E7535F35AD7B78D89201752FE93F INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Brand : HUAWEI ProdName : LUA-L21 ProdModel : HUAWEI LUA-L21 Device : HWLUA-L6735 AndroidVer: 5.1 MTKxCPU : MT6735 MTKxPRJ : ALPS.L1.MP3.V2.95_OT6735M.35GU.LU.L1_P1 SECURITY : IMEI_SW [1] : 863607030835779 IMEI_SW [2] : 863607033335777 BTMAC Addr : F043475333F6 WiFi MAC : F04347564136 MODEM : BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V48_P10_1_lwg _1 EXTRA : LCD : Not info available LCD Res : 854x480 TOUCH [0] : GT1XX CAM [0] : ov5648_mipi_raw CAM [1] : gc2355_mipi_raw CAM [2] : sp2508_mipi_raw CAM [3] : hi545_mipi_raw MODEM : mt6735_sp_lwg_dsds_c2kirat_prod LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES Done! Elapsed: 00:00:23 Reconnect Power/Cable!

05-26-2019, 12:54	#417 (permalink)
rafee_baba Freak Poster Join Date: Nov 2009 Location: multan Posts: 211 Member: 1159475 Status: Offline Sonork: multan Thanks Meter: 68	MTK Secure Boot File https://www.youtube.com/watch?v=H_el0OemsbU