Successfully unlocked/repaired phones by Infinity-Box

[Tanha0321]

Operation : Identify [ v1.01 ]
 
Waiting for device in fastboot mode ... 
 
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
 
Connect Ok!
 
Main Info  ============ 
CPU      : MSM8939
CID      : 0x0002
IMEI     : 990006240152628
UID      : DA98FD0300000000000000000000

Model Info ============ 
DevModel : XT1565
IntName  : lux

SW Info ============ 
DevSWVer : Blur_Version.24.211.6.lux_verizon.verizon.en.US
DevQCVer : AU_LINUX_ANDROID_LA.BR.1.1.3_RB1.05.01.00.032.015
BaseBand : M8936_2150111.36.06.16R LUX_VZW_CUST
BootLDRv : moto-msm8939-80.EF

HW Info ============ 
eMMCInfo : 16GB Toshiba REV=07 PRV=00 TYPE=57
DRAMInfo : 2048MB Samsung S8 SDRAM DIE=4Gb

Lock Info ============ 
BLUnlock : no
WarrantyVoid : no
FRP Lock : protected (75)

Done!
Elapsed: 00:00:05

Operation : Enable ADB (Moto) [ v1.01 ]
 
Waiting for NetInterface arrival ... 
 
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON' 
3. Connect USB cable, when device boot complete!
 
Connect Ok!
 
Waiting ... 
Trying link with  : 192.168.137.2
Connected to device!
 
Device : XT1565
VerInfo : LUX_VZW_CUST
Version : Blur_Version.24.211.6.lux_verizon.verizon.en.US
 
Enabling ADB ... 

1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON'
2. Select 'FACTORY MODE' and press 'POWER ON'!
3. Wait for device boot completely!

Done!
Elapsed: 00:00:09

Operation : Reset FRP (ADB) [ v1.01 ]
 
Waiting for device in ADB mode ... 
 
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
 
Connect Ok!
 
Device : lux_verizon
Model  : XT1565
FRP reset passed! Make FACTORY RESET from menu!

Done!
Elapsed: 00:00:13

[Tanha0321]

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447326111014984C2916281
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A483447326111014984C2916281
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xD5229C25F2650DE5C09D2E990964BC7F
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : TINNO
ProdName  : QMobile X30
ProdModel : QMobile X30
Device    : QMobile X30
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6572 , Project : s4050ap , Storage : EMMC
Files found : 11 , Set to Flash : 10
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447326111014984C2916281
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A483447326111014984C2916281
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xD5229C25F2650DE5C09D2E990964BC7F
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : s4050ap , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Disabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3248 mV
BL : [WARNING] : BatteryLevel LOW!!!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x00000000E5E00000
Flash Pre-Erase Done, time used : 00:00:01

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_s4050ap.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:02:48


Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:03:08
Reconnect Power/Cable!

[azhergoga007]

Card found: S/N : A19EC787 , v0136
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC7715] NAND [Generic]

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected NAND Flash , Structure detect Ok!

Formatting NAND Flash
Format UserData
Format Ok!
Format Cache
Format Ok!

Done!

Elapsed: 00:00:20

Reconnect Power/Cable!

[diesel6]

7562 write flash done

Phone found on COM15

Phone In Download mode...
Port open Ok!
LOKE received!
Prepare Ok!
Enter Setup...
Setup Done!
Try download PIT...
Download PIT Ok!
Start flashing!

Flashing oemsbl
Flashing appsbl
Flashing qcsbl.mbn
Flashing qcsblhd_cfgdata.mbn
Flashing appsbl
Flashing boot.img
Flashing oemsbl
Flashing persist.img.ext4
Flashing qcsbl.mbn
Flashing qcsblhd_cfgdata.mbn
Flashing recovery.img
Flashing system.img.ext4
Flashing userdata.img.ext4
Flashing fat.bin
Flashing cache.img.ext4
Flashing hidden.img.ext4
Flashing done

Reboot phone...


Phone Disconnected

[azhergoga007]

Card found : S/N : A19EC787 , v0136
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 46 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D420717E4C26C93FF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xD9C8F395AFCE41559A7E645A192E3D4B
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear PVL ( PrivacyLock )
Clear Ok!

Done!
Elapsed: 00:00:06
Reconnect Power/Cable!

[Salman725626]

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : B72B94BC
ID_BLOCK_I : 0004F0E1
ID_BLOCK_E : 00007A2A
ID_BLOCK_L : 9CC2C33B3D4924CD1051BB71FA4D8E37
ID_BLOCK_L : 1F6250BFBCD3F881A82C91A7D3AD339D
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RX1BMB
Boot Ok!


Brand : Lenovo
ProdName : karatep
ProdModel : Lenovo K53
Device : K53
AndroidVer: 6.0.1
Manufact. : LENOVO
QLMxCPU : MSM8937
QLMxPRJ : K53_USR_S116_1611150903_Q00380_ROW

DevInfo : MSM8937__LENOVO__Lenovo__ANDR_v6.0.1__Lenovo_K53__ K53__karatep__K53_USR_S116_1611150903_Q00380_ROW

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sec.dat
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : ap.mbn
[Read Ok] : msap.mbn
[Read Ok] : splash.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : system.img
[Read Ok] : preload.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8937 / eMMC
Firmware Size : 3950 MiB

Done!
Elapsed: 00:09:08

Reconnect Power/Cable!

[4G Telecom]

Moto G3 Frp Remove Done
Adb Enable

Operation : Enable ADB (Moto) [ v1.01 ]

Waiting for NetInterface arrival ...

1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!

Waiting ...
Trying link with : 192.168.137.2
Connected to device!

Device : XT1550
VerInfo : OSPREY_APAC_CUST
Version : Blur_Version.24.226.17.osprey_retasia_ds_2gb.retas ia.en.03

Enabling ADB ...

Frp Remove

Operation : Reset FRP (ADB) [ v1.01 ]

Waiting for device in ADB mode ...

1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Connect Ok!

Device : osprey_retasia_ds_2gb
Model : MotoG3
FRP reset passed! Make FACTORY RESET from menu!

[Tanha0321]

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 002C00BC009000550056000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0091 , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0xD5229C25EA66E4985ED488FB6C817BB7
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : alps
ProdName  : zr72_wet_lca
ProdModel : zr72_wet_lca
Device    : zr72_wet_lca
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.8

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 002C00BC009000550056000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0091 , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0xD5229C25EA66E4985ED488FB6C817BB7
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

[azhergoga007]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 78 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D420717E4C26C93FF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xD9C8F395AFCE41559A7E645A192E3D4B
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

BL : BBID supported by BootLoader!
Supported HW by Preloader :
FlashID [0] CID : 150100523331424142 , Name : R31BAB , Vendor : 15 , [SAMSUNG]
FlashID [1] CID : 150100525831344D42 , Name : RX14MB , Vendor : 15 , [SAMSUNG]
FlashID [2] CID : 150100524331344D42 , Name : RC14MB , Vendor : 15 , [SAMSUNG]
BL : Storage supported by BootLoader!
Sending BootLoader ...
Init BL #1 : 0001
Init BL #2 : 0001
PartTable Init Ok , Count : 1D
All Done

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

[Tanha0321]

Operation : Enable ADB (Moto) [ v1.01 ]
 
Waiting for NetInterface arrival ... 
 
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON' 
3. Connect USB cable, when device boot complete!
 
Connect Ok!
 
Waiting ... 
Trying link with  : 192.168.137.2
Connected to device!
 
Device : XT1254
VerInfo : QUARK_CUST
Version : Blur_Version.24.91.5.quark_verizon.verizon.en.US
 
Enabling ADB ... 

1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON'
2. Select 'FACTORY MODE' and press 'POWER ON'!
3. Wait for device boot completely!

Done!
Elapsed: 00:00:09

Operation : Reset FRP (ADB) [ v1.01 ]
 
Waiting for device in ADB mode ... 
 
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
 
Connect Ok!
 
Device : quark_verizon
Model  : XT1254
FRP reset passed! Make FACTORY RESET from menu!

Done!
Elapsed: 00:00:12

[azhergoga007]

Operation : Read PatternLock [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 23E4D0D6
ID_BLOCK_I : 007050E1
ID_BLOCK_L : D3154FB7268CB9B493C80815D2A92921
ID_BLOCK_L : BFD678D3C44FFF74896429E6EC031D3E
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Read Ok! Trying decrypt ...
PatternLock sequence : 26598

Done!
Elapsed: 00:00:22

Reconnect Power/Cable!

[mak1983]

Operation : Identify [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 625 [MSM8953]
ID_BLOCK_S : AA5A6FDD
ID_BLOCK_I : 000460E1
ID_BLOCK_L : 713EAD893332E6B9D8AC3C6BFF6FAFA0
ID_BLOCK_L : 22D2A80FCEE9F9312EB95A4D2A9C483D
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RC14MB
Boot Ok!


Brand : xiaomi
ProdName : mido
ProdModel : Redmi Note 4
Device : mido
AndroidVer: 6.0.1
Manufact. : Xiaomi
SysPatch : MMB29M
DevComTime: 02/06/2017 1:53:58 PM
QLMxCPU : MSM8953

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 625 [MSM8953]
ID_BLOCK_S : AA5A6FDD
ID_BLOCK_I : 000460E1
ID_BLOCK_L : 713EAD893332E6B9D8AC3C6BFF6FAFA0
ID_BLOCK_L : 22D2A80FCEE9F9312EB95A4D2A9C483D
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RC14MB
Boot Ok!


Brand : xiaomi
ProdName : mido
ProdModel : Redmi Note 4
Device : mido
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU : MSM8953

DevInfo : MSM8953__Xiaomi__xiaomi__ANDR_v6.0.1__Redmi_Note_4 __mido__mido

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8953 / eMMC
Firmware Size : 3684 MiB

Done!
Elapsed: 00:04:33

Reconnect Power/Cable!

Operation : Reset Settings [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 625 [MSM8953]
ID_BLOCK_S : AA5A6FDD
ID_BLOCK_I : 000460E1
ID_BLOCK_L : 713EAD893332E6B9D8AC3C6BFF6FAFA0
ID_BLOCK_L : 22D2A80FCEE9F9312EB95A4D2A9C483D
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RC14MB
Boot Ok!


MIAccount reset passed!

Complete reset :
> If device lock after WiFi - use RESET MI APP
> PowerOn device, NOT power WiFi, SIM and etc. Make device setup
> Reset MI APP. Device will not have MIServices anymore


Done!
Elapsed: 00:00:23

[rose_petel]

MT6580__INFINIX__Infinix_HOT_3__W90918A2_Infinix_H OT_3__5.1__ALPS.L1.MP6.V2.19_WT6580.WE.XIAN.L_P16


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 35 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001005631303031365011D77385C239
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 61001
[eMMC] : FLASH_CID : 7001005631303031365011D77385C239
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000386000000
[eMMC] : FLASH_UCP : 14432 MiB [eMMC 16 GiB]
DEV RID : 0xEE6AE9A2C192457A6F47E5EA9A6930C6
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : INFINIX
ProdName : Infinix HOT 3
ProdModel : Infinix HOT 3
Device : W90918A2 Infinix HOT 3
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2.19_WT6580.WE.XIAN.L_P16

[Read Ok] : preloader_t90918a2.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / t90918a2 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2859 MiB
Scatter saved to : C:\Users\my pc\Desktop\faulty phones backup\MT6580__INFINIX__Infinix_HOT_3__W90918A2_In finix_HOT_3__5.1__ALPS.L1.MP6.V2.19_WT6580.WE.XIAN .L_P16\

All done!

[sachu2002]

Operation : Read PatternLock [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 216D5564
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 6183F905B03E2B2601769E87401B9BB3
ID_BLOCK_L : 245FE1484DD4068F02EDA61F159896B5
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Read Ok! Trying decrypt ...
PatternLock sequence : 7584

Done!
Elapsed: 00:00:34

Reconnect Power/Cable!

[syed tuqeer]

World First ! (bla bla......)

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 229 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 16FAED1E977888DE7775E32E52EE38DD
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000 
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

File_Info   : HEXIN23_KK_PCB01_gprs_MT6261_S01.M61D_TICHIPS_EFABPWHE_GC0310_BT_T230_V1.bin
FileVersion : M61D_TICHIPS_EFABPWHE_GC0310_BT_T230_V1

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 229 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 16FAED1E977888DE7775E32E52EE38DD
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000 
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : HEXIN23_KK_PCB01_gprs_MT6261_S01.M61D_TICHIPS_EFABPWHE_GC0310_BT_T230_V1.bin
FileVersion : M61D_TICHIPS_EFABPWHE_GC0310_BT_T230_V1

[ScatCFG] : MT6261 / M61D_TICHIPS_EFABPWHE_GC0310_BT_T230_V1 / NOR , SF
Firmware saved to : F:\1+Flashing Software\1+Infinity Box\CM2MTK\Read_out\HEXIN23_KK_PCB01_gprs_MT6261_S01\

Done!
Elapsed: 00:00:18
Reconnect Power/Cable!