Successfully unlocked/repaired phones by Infinity-Box

[nobichanmaruf]

Reading Flash Content now ...

Brand : TCT
ProdName : ALCATEL_ONE_TOUCH_5036D
ProdModel : ALCATEL ONE TOUCH 5036D
Device : YarisL_GSM
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1

[Read Ok] : preloader_yarisl.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / yarisl / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1238 MiB
Scatter saved to :\MT6572__TCT__ALCATEL_ONE_TOUCH_5036D__YarisL_GSM __4.2.2__ALPS.JB3.MP.V1\

All done

[nobichanmaruf]

Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 504E01FE35394A31AE82124BEFA8A292
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , K59J1
[eMMC] : FLASH_CID : FE014E50314A39354B1282AE92A263EF
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000001D3000000
[eMMC] : FLASH_UCP : 7472 MiB [eMMC 8 GiB]
DEV RID : 0xCE7B154C95FA430F68B1AD35BF354E4C
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : TCL
ProdName : 5045X
ProdModel : 5045X
Device : PIXI4_5_4G
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.m_P50

[Read Ok] : preloader_jhz6735m_35u_m.bin
[Read Ok] : simlock.img
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / jhz6735m_35u_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2156 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6735__TCL__5045X_ _PIXI4_5_4G__6.0__alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.m_P50\

All done!

[nobichanmaruf]

Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 05C712EF
ID_BLOCK_I : 009600E1
ID_BLOCK_L : F40C66903FABD0D38CE1137CBB860E3E
ID_BLOCK_L : 82F15FEEE372DC696C4B0CC5CF26301B
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!

Brand : TCL
ProdName : 5051X
ProdModel : 5051X
Device : POP45
AndroidVer: 6.0.1
Manufact. : TCL
QLMxCPU : MSM8909

DevInfo : MSM8909__TCL__TCL__ANDR_v6.0.1__5051X__POP45__5051 X

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : boot.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : splash.img
[Read Ok] : secro.img
[Read Ok] : misc.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : system.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!

Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 2054 MiB

Done!
Elapsed: 00:18:56

[nobichanmaruf]

Reading Flash Content now ...

Brand : TCT
ProdName : ALCATEL_ONE_TOUCH_7041D
ProdModel : ALCATEL ONE TOUCH 7041D
Device : YARISXL
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.MP.V1.1

[Read Ok] : preloader_yaris_xl.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / yaris_xl / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1032 MiB
Scatter saved to : \MT6582__TCT__ALCATEL_ONE_TOUCH_7041D__YARISXL__4. 2.2__ALPS.JB5.MP.V1.1\

All done!
Done!

[nobichanmaruf]

Reading Flash Content now ...

Brand : TCT
ProdName : ALCATEL_ONE_TOUCH_7047D
ProdModel : ALCATEL ONE TOUCH 7047D
Device : YARIS_55
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.MP.V1.1

[Read Ok] : preloader_yaris_xxl.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / yaris_xxl / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1202 MiB
Scatter saved to : \MT6582__TCT__ALCATEL_ONE_TOUCH_7047D__YARIS_55__4 .2.2__ALPS.JB5.MP.V1.1\

All done!

[nobichanmaruf]

Reading Flash Content now ...

Brand : TCT
ProdName : Scribe5HD
ProdModel : ALCATEL ONE TOUCH 8008D
Device : Scribe5HD
AndroidVer: 4.2.1
MTKxCPU : MT6589
MTKxPRJ : ALPS.JB2.MP.V1

[Read Ok] : preloader_jrdsz89_we_jb2.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / jrdsz89_we_jb2 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1176 MiB
Scatter saved to : \MT6589__TCT__ALCATEL_ONE_TOUCH_8008D__Scribe5HD__ 4.2.1__ALPS.JB2.MP.V1\

All done!

[nobichanmaruf]

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50314A39344B121F8A3EAFA1EF
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , K49J1
[eMMC] : FLASH_CID : FE014E50314A39344B121F8A3EAFA1EF
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9800000
[eMMC] : FLASH_UCP : 3736 MiB [eMMC 4 GiB]
DEV RID : 0xD3510ECE8BD39A1238721694FD6CE173
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : TCL
ProdName : 9005X
ProdModel : 9005X
Device : PIXO8_3G
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.16

[Read Ok] : preloader_pixo8_3g.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / pixo8_3g / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1323 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6582__TCL__9005X_ _PIXO8_3G__4.4.2__ALPS.KK1.MP1.V2.16\

All done!

[nobichanmaruf]

Brand : TCT
ProdName : ALCATEL_ONETOUCH_P310A
ProdModel : ALCATEL ONETOUCH P310A
Device : POP7
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.TABLET.MP.V1

[Read Ok] : preloader_tcl82_tb_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / tcl82_tb_jb5 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1036 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\SAM\MT6582__TCT__AL CATEL_ONETOUCH_P310A__POP7__4.2.2__ALPS.JB5.TABLET .MP.V1\

All done!

[nobichanmaruf]

[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / s23_72_nand_fwvga_yskj_f4_******_44 / NAND
FW Size : 243 MiB

Brand : ******
ProdName : A15
ProdModel : A15
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : MP.V1.0

Android Info saved

Scatter saved to : C:\Users\maruf\Desktop\MT6572_NAND_******__A15___4 .4.2__MP.V1.0

Done!

[nobichanmaruf]

Model Name : sp7731c_1h10_32v4_oversea

Model Brand : ******

Model Device: sp7731c_1h10_32v4

AndrVersion : 6.0

BaseBand CPU: SP7731CEB

Project Ver : MRA58K release-keys

Model Ext : A16

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : logo2.bin

[Read Ok] : logo3.bin

[Read Ok] : logo4.bin

[Read Ok] : logo5.bin

[Read Ok] : logo6.bin

[Read Ok] : logo7.bin

[Read Ok] : logo8.bin

[Read Ok] : logo9.bin

[Read Ok] : logo10.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Read Ok] : sysinfo.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1805 MiB

Saved to : C:\Users\nobichanmaruf\Desktop\SP7731CEB_sp7731c_1 h10_32v4_6.0_MRA58K_release-keys_A16\

Done!

[nobichanmaruf]

xGPT : Normalize settings Ok!

Brand : BLU
ProdName : Grand_M
ProdModel : Grand M
Device : Grand_M
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_zechin6580.weg.m_P101
[Read Ok] : preloader_zechin6580_weg_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / zechin6580_weg_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1438 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__BLU__Grand_ M__Grand_M__6.0__alps-mp-m0.mp1-V2.34_zechin6580.weg.m_P101\

All done!

[princesaddam]

Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : OPM2.171019.012
Display ID     : UTLPlatinum P9v1008_17-08-2018
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-07-05
Build Time     : 1534502153
Product Model  : Platinum P9
Product Brand  : Karbonn
Product Name   : Platinum_P9
Product Device : Platinum_P9
Product Manfct : Karbonn
Product Info   : Platinum P9
Board Platform : sp9832e

UserData : STATE : ENCRYPTION

Open : UTLPlatinum_P9v1008_17-08-2018.pac
VER : BP_R1.0.0
LEN : 0xA7B3EC4A
CPU : sp9832e_1h10
VER : MocorDroid8.1_Trunk

Reading package ... 
Read package finished!

Patch Level    : OPM2.171019.012
Display ID     : UTLPlatinum P9v1008_17-08-2018
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-07-05
Build Time     : 1534502153
Product Model  : Platinum P9
Product Brand  : Karbonn
Product Name   : Platinum_P9
Product Device : Platinum_P9
Product Manfct : Karbonn
Product Info   : Platinum P9
Board Platform : sp9832e

Operation : Flash Firmware [ v2.00r2 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : PAC : UTLPlatinum_P9v1008_17-08-2018.pac
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x21
PMTMng : Update PMT Ok!

CODE  : prodnv.img
ERASE : UBOOT
ERASE : UBOOT_LOG
UBOOT : u-boot-spl-16k-sign.bin
CODE  : SC9600_sharkle_pubcp_customer_Smart_Phone_modem.dat
CODE  : SharkLE_LTEA_DSP_evs_on.bin
CODE  : SHARKLE2_DM_DSP.bin
CODE  : sharkle_cm4.bin
CODE  : PM_sharkle_cm4.bin
CODE  : boot.img
CODE  : recovery.img
FSIMG  : system.img
FSIMG  : userdata.img
CODE  : logo.bmp
CODE  : logo.bmp
FSIMG  : cache.img
ERASE : L_RUNTIMENV1
ERASE : MISC
UBOOT : u-boot-sign.bin
FSIMG  : persist.img
CODE  : sharkle_pubcp_customer_Smart_Phone_deltanv.bin
CODE  : sml-sign.bin
FSIMG  : vendor.img
CODE  : tos-sign.bin
CODE  : gnssbdmodem.bin
CODE  : gnssmodem.bin
CODE  : vbmeta-sign.img

Flashing finished!

Reconnect Power/Cable!


Done!
Elapsed: 00:07:06

[nobichanmaruf]

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100463558354342013EABD06542E5
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BC5X5
[eMMC] : FLASH_CID : 150100463558354342013EABD06542E5
[eMMC] : FLASH_EXT : 00400000/00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : BLU
ProdName : BLU_STUDIO_G
ProdModel : BLU STUDIO G
Device : BLU_STUDIO_G
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.10

MODEM :
BaseBand : MT6582_S00_D5020_GSM4_W12458_MT6582_MP_V0_0_6_S020 6_BLU_1_wg_n

EXTRA :
LCD [0] : otm8019a_dsi_vdo_boyi_hsd_fwvga_ips
LCD [1] : ili9806e_dsi_vdo_dijin_hsd_fwvga_ips
LCD [2] : ili9806e_dsi_vdo_hlt_fwvga_ips_d5020
LCD [3] : hx8379c_dsi_vdo_trust_fwvga_ips
LCD [4] : #otm1283a_dsi_vdo_hlt_boe_hd720_ips
LCD [5] : hx8394_dsi_vdo_djn_hd720_cpt_ips_oncell
LCD Res : 854x480
TOUCH [0] : GT950_1050
TOUCH [1] : #GT9157_hotknot
TOUCH [2] : synaptics_mtk_v5
TOUCH [3] : GT9XX_2
CAM [0] : ov5648_mipi_raw
CAM [1] : hi545_mipi_raw
CAM [2] : gc5004_mipi_raw
CAM [3] : sp0a19_yuv
CAM [4] : gc0312_yuv
CAM [5] : gc2355_raw
MODEM : d5020_gsm4_w12458_mt6582_hspa_gemini_blu
LOCALE : en_US es_ES pt_PT pt_BR nl_NL zh_CN fr_FR de_DE hu_HU cs_CZ ar_EG fa_IR sr_RS bg_BG pl_PL ru_RU sr_RS iw_IL bg_BG vi_VN hr_HR

Done!

[nobichanmaruf]

xGPT : Normalize settings Ok!

Brand : BLU
ProdName : Grand_M
ProdModel : Grand M
Device : Grand_M
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_zechin6580.weg.m_P101
[Read Ok] : preloader_zechin6580_weg_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / zechin6580_weg_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1438 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__BLU__Grand_ M__Grand_M__6.0__alps-mp-m0.mp1-V2.34_zechin6580.weg.m_P101\

All done!

[nobichanmaruf]

Wait for phone...
Phone found! [ 20 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1B79D006007
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0x605BA6A75DAC693BCC6C933C1D96C19B
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : BLU
ProdName : BLU STUDIO 5.0
ProdModel : BLU STUDIO 5.0
Device : STUDIO
AndroidVer: 4.1.2
MTKxCPU : MT6577
MTKxPRJ : ALPS.JB.MP.V1.19

[Read Ok] : preloader_tinno77_s8201_jb.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : EBR2
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6577 / V1.0.0 / tinno77_s8201_jb / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 544 MiB
Scatter saved to : D:\BST\MT6577__BLU__BLU_STUDIO_5.0__STUDIO__4.1.2_ _ALPS.JB.MP.V1.19\

All done!

Done!
Elapsed: 00:04:16
Reconnect Power/Cable!