GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 02-06-2015, 06:57   #21001 (permalink)
No Life Poster
 
nbkappa's Avatar
 
Join Date: Sep 2007
Location: around
Posts: 754
Member: 595864
Status: Offline
Thanks Meter: 114
Thumbs up Nokia 700 RM-670 USER Code RESET Removal


- read RPL
- real Product Profile
- read full PM
- factory settings : all checks and DO !

FULL Log :


Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---

-------BOOT BREAKED BY USER-------

-> Phone not found..
Looks like ASIC not supported, or HW failure
Supported : RapuYamaVx, RAP3Gv4, BroadComm, RAPIDO, XG213, XG221, XG223, XG618

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 4E680000FFFB7C40A3081FF9A3239EBACC76CC86
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : BD43E84B21F8AC7B9C66EA939355891E2A08044A
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 357023048039987
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
ADL: Reading certificates done!
ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot

Wait, reconneting...

SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
WMDRM read ... Ok
CRT308 Backup Created
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

Swap data collected to 059L7B8.pc

RPL saved : C:\InfinityBox\BEST\Backup\Cert\357023048039987.rp l

All done, Disconnecting

Elapsed: 00:00:32
Connect phone on selected interface...


Phone found!
Series 60 Device detected!
read info... - Ok

Operating mode is OK, no need change...
Reading Product Profile sets...

0 - 127
1 - 0
4 - 0
7 - 1
9 - 0
34 - 0
35 - 0
56 - 0
61 - 0
65 - 0
66 - 0
69 - 1
70 - 0
71 - 1
78 - 0
79 - 1
100 - 1
130 - 5
131 - 7
135 - 0
138 - 0
145 - 0
146 - 0
147 - 0
157 - 1
158 - 1
164 - 0
165 - 0
166 - 0
168 - 0
177 - 0
183 - 0
192 - 0
202 - 3
205 - 0
206 - 0
211 - 0
212 - 0
214 - 0
217 - 0
219 - 0
220 - 0
228 - 0

SETS 1
Readed 43 element(s)
Saved as C:\InfinityBox\BEST\RM-670 Nokia 700_357023048039987.pp

Done!

Elapsed: 00:00:00

Reading PM from field 0 to 400

Field [1] 31 Record(s)
Record 0: 10 byte(s) readed - Ok
Record 1: 94 byte(s) readed - Ok
Record 2: 110 byte(s) readed - Ok
Record 4: 10 byte(s) readed - Ok
Record 6: 110 byte(s) readed - Ok
Record 7: 450 byte(s) readed - Ok
Record 8: 10 byte(s) readed - Ok
Record 13: 110 byte(s) readed - Ok
Record 15: 30 byte(s) readed - Ok
Record 16: 30 byte(s) readed - Ok
Record 17: 30 byte(s) readed - Ok
Record 18: 30 byte(s) readed - Ok
Record 19: 30 byte(s) readed - Ok
Record 22: 24 byte(s) readed - Ok
Record 26: 10 byte(s) readed - Ok
Record 27: 36 byte(s) readed - Ok
Record 28: 110 byte(s) readed - Ok
Record 29: 10 byte(s) readed - Ok
Record 30: 36 byte(s) readed - Ok
Record 31: 24 byte(s) readed - Ok
Record 32: 216 byte(s) readed - Ok
Record 33: 36 byte(s) readed - Ok
Record 35: 24 byte(s) readed - Ok
Record 36: 24 byte(s) readed - Ok
Record 38: 216 byte(s) readed - Ok
Record 39: 36 byte(s) readed - Ok
Record 40: 24 byte(s) readed - Ok
Record 41: 216 byte(s) readed - Ok
Record 43: 36 byte(s) readed - Ok
Record 44: 216 byte(s) readed - Ok
Record 45: 216 byte(s) readed - Ok
Field [2] 1 Record(s)
Record 0: 2808 byte(s) readed - Ok
Field [4] 7 Record(s)
Record 1: 200 byte(s) readed - Ok
Record 3: 10 byte(s) readed - Ok
Record 4: 8 byte(s) readed - Ok
Record 5: 8 byte(s) readed - Ok
Record 6: 8 byte(s) readed - Ok
Record 9: 5 byte(s) readed - Ok
Record 28: 2 byte(s) readed - Ok
Field [6] 1 Record(s)
Record 0: 98 byte(s) readed - Ok
Field [8] 10 Record(s)
Record 0: 2 byte(s) readed - Ok
Record 1: 16 byte(s) readed - Ok
Record 2: 16 byte(s) readed - Ok
Record 3: 128 byte(s) readed - Ok
Record 4: 128 byte(s) readed - Ok
Record 8: 8 byte(s) readed - Ok
Record 9: 8 byte(s) readed - Ok
Record 10: 32 byte(s) readed - Ok
Record 11: 4 byte(s) readed - Ok
Record 12: 4 byte(s) readed - Ok
Field [11] 5 Record(s)
Record 0: 4 byte(s) readed - Ok
Record 1: 4 byte(s) readed - Ok
Record 2: 4 byte(s) readed - Ok
Record 3: 4 byte(s) readed - Ok
Record 4: 1062 byte(s) readed - Ok
Field [12] 1 Record(s)
Record 0: 8 byte(s) readed - Ok
Field [26] 2 Record(s)
Record 0: 16 byte(s) readed - Ok
Record 1: 68 byte(s) readed - Ok
Field [31] 1 Record(s)
Record 4: 16 byte(s) readed - Ok
Field [44] 1 Record(s)
Record 0: 1 byte(s) readed - Ok
Field [50] 2 Record(s)
Record 0: 2 byte(s) readed - Ok
Record 1: 2 byte(s) readed - Ok
Field [54] 2 Record(s)
Record 0: 2 byte(s) readed - Ok
Record 2: 24 byte(s) readed - Ok
Field [96] 2 Record(s)
Record 0: 2 byte(s) readed - Ok
Record 1: 20 byte(s) readed - Ok
Field [120] 4 Record(s)
Record 0: 56 byte(s) readed - Ok
Record 1: 160 byte(s) readed - Ok
Record 2: 130 byte(s) readed - Ok
Record 3: 112 byte(s) readed - Ok
Field [122] 1 Record(s)
Record 0: 2 byte(s) readed - Ok
Field [153] 6 Record(s)
Record 0: 68 byte(s) readed - Ok
Record 1: 68 byte(s) readed - Ok
Record 2: 68 byte(s) readed - Ok
Record 3: 68 byte(s) readed - Ok
Record 4: 68 byte(s) readed - Ok
Record 5: 68 byte(s) readed - Ok
Field [193] 4 Record(s)
Record 2: 8 byte(s) readed - Ok
Record 3: 32 byte(s) readed - Ok
Record 4: 32 byte(s) readed - Ok
Record 9: 64 byte(s) readed - Ok
Field [217] 1 Record(s)
Record 0: 32 byte(s) readed - Ok
Field [239] 3 Record(s)
Record 0: 2 byte(s) readed - Ok
Record 20: 6268 byte(s) readed - Ok
Record 21: 226 byte(s) readed - Ok
Field [296] 4 Record(s)
Record 0: 2 byte(s) readed - Ok
Record 1: 4 byte(s) readed - Ok
Record 2: 24 byte(s) readed - Ok
Record 3: 5 byte(s) readed - Ok
Field [308] 7 Record(s)
Record 0: 1 byte(s) readed - Ok
Record 1: 8192 byte(s) readed - Ok
Record 3: 1 byte(s) readed - Ok
Record 4: 1 byte(s) readed - Ok
Record 6: 1 byte(s) readed - Ok
Record 7: 1 byte(s) readed - Ok
Record 9: 40 byte(s) readed - Ok
Field [309] 7 Record(s)
Record 0: 4 byte(s) readed - Ok
Record 1: 2 byte(s) readed - Ok
Record 2: 12 byte(s) readed - Ok
Record 3: 36 byte(s) readed - Ok
Record 4: 12 byte(s) readed - Ok
Record 7: 12 byte(s) readed - Ok
Record 17: 12 byte(s) readed - Ok
Field [313] 1 Record(s)
Record 0: 800 byte(s) readed - Ok
Field [322] 1 Record(s)
Record 0: 1 byte(s) readed - Ok
Field [334] 1 Record(s)
Record 0: 1 byte(s) readed - Ok
Field [341] 3 Record(s)
Record 0: 1 byte(s) readed - Ok
Record 3: 4 byte(s) readed - Ok
Record 4: 4512 byte(s) readed - Ok
Field [354] 1 Record(s)
Record 0: 13 byte(s) readed - Ok
Field [356] 1 Record(s)
Record 0: 2 byte(s) readed - Ok
Field [360] 2 Record(s)
Record 0: 1 byte(s) readed - Ok
Record 1: 2 byte(s) readed - Ok
Field [369] 1 Record(s)
Record 0: 40 byte(s) readed - Ok
Field [382] 2 Record(s)
Record 0: 64 byte(s) readed - Ok
Record 1: 4 byte(s) readed - Ok
Field [388] 1 Record(s)
Record 0: 4 byte(s) readed - Ok
Field [389] 9 Record(s)
Record 0: 4 byte(s) readed - Ok
Record 1: 3 byte(s) readed - Ok
Record 2: 6 byte(s) readed - Ok
Record 3: 1 byte(s) readed - Ok
Record 4: 10 byte(s) readed - Ok
Record 5: 8 byte(s) readed - Ok
Record 7: 3 byte(s) readed - Ok
Record 8: 3 byte(s) readed - Ok
Record 21: 80 byte(s) readed - Ok
Field [395] 1 Record(s)
Record 0: 16 byte(s) readed - Ok

Saved as C:\InfinityBox\BEST\Backup\RM-670 Nokia 700_357023048039987_0_400.pm
Done!

Elapsed: 00:00:01

Reading User code...
User Code is: Error! Crypted user code!
Done!

Reading User code...
User Code is: Error! Crypted user code!
Done!

Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:08
  Reply With Quote
The Following User Says Thank You to nbkappa For This Useful Post:
Old 02-06-2015, 11:17   #21002 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,433
Member: 1039903
Status: Offline
Thanks Meter: 1,877
Micromax A72 Gmail Lock

Operation : Check / Read Info
Code:
Operation : Check / Read Info [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 31 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0065 , [TOSHIBA] TC58NYG0S8C
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Initial info read Ok!

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!
Format FileSystem
Code:
Operation : Format FileSystem [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 31 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0065 , [TOSHIBA] TC58NYG0S8C
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Format : Cache and UserData (Full Factory Reset)

Format CACHE block
Format block Ok!
Format UDA block
Format block Ok!

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to VIJAY2U2 For This Useful Post:
Old 02-06-2015, 15:31   #21003 (permalink)
Freak Poster
 
Join Date: Nov 2012
Location: batna.algeria
Posts: 182
Member: 1834802
Status: Offline
Sonork: 100.1659078
Thanks Meter: 81
g900

[CODE]Operation : Check/Read Info [ v1.01 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 273 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0018 0000
[0] Flash VEN : GigaDevice , GD25LQ128
[0] Flash CAP : 01000000
Done!

Elapsed: 00:00:07

[CODE]

Code:
Operation : Read FullFlash [ v1.01 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 273 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0018 0000
[0] Flash VEN : GigaDevice , GD25LQ128
[0] Flash CAP : 01000000
Read Flash Content
Read Ok , collect info
ExtInfo  : MC6531_12B_13.05_Debug
Project  : SC6531_PDA
Compile  : 04-21-2014 20:44:53
Set FileInfo : 
Model Vendor : samsung
Model Name   : g900
ExtInfo Data : ar-en-fr
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_01000000_MC6531_12B_13.05_Debug_04212014204453_ar-en-fr__samsung-g900.bin
Done!

Elapsed: 00:02:02

Reconnect Power/Cable!
Code:
Operation : Read NV [ v1.01 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 273 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0018 0000
[0] Flash VEN : GigaDevice , GD25LQ128
[0] Flash CAP : 01000000
Check data ... 
Reading NV ... 
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\g9006531_NV_00008000.nv

Elapsed: 00:00:23

Reconnect Power/Cable!

Last edited by cheddihouse; 02-06-2015 at 15:41.
  Reply With Quote
The Following User Says Thank You to cheddihouse For This Useful Post:
Old 02-07-2015, 05:06   #21004 (permalink)
No Life Poster
 
Join Date: May 2008
Posts: 2,705
Member: 770503
Status: Offline
Thanks Meter: 989
Octenn T1100

Code:
Operation : Reset UserCode [ v1.08 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 8 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 0FCF11E961F68BD3CC1A58A57E8370FF
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , 
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00300000
SDS : 0x002FE000 , 0x00002000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to mbiborna For This Useful Post:
Old 02-07-2015, 05:55   #21005 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,878
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,947
E52 Factory Reset Done :)

Code:
Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007600C192102011104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C34
EM1 ID:        00000C30
PUBLIC ID:     10700217F35E03442EA47CAE8FA536F0816342C1
ASIC MODE ID:  00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID:        3E273BF637BE26FA
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 85F252E351E225CAFC4DFBC8041EABD2823E3500
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 3552160321xxxxx
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000010000000000000000
ADL: Reboot

Wait, reconneting...

SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
WMDRM read ... Ok
CRT308 Backup Created
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

Swap data collected to 0568316.pc

RPL saved : F:\1+Flashing Software\1+BEST\InfinityBox\BEST\Backup\Cert\3552160321xxxxx.rpl

All done, Disconnecting

Elapsed: 00:00:23
Connect phone on selected interface...


Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia E52-1
Software ver : V ICPR82_11w16.3.11 29-03-12 RM-469 (c) Nokia
IMEI    :      3552160321xxxxx
XappVer :      000007DA
Ape Ver :      091.004
APE Var :      091.004091.004.02.01
APE ADSP:      256
DSP Ver :      11w52
APE Test:      v0.a091
PPM     :      
CNT     :      
Product SN   :     SEL482445
Product code :     059N417
Base Prd.code:     0565921
Long Prod.SN :     0
Hardware info=======
HWID  : 6000
Retu  : 34
Tahvo : 00
Batery: 3704 mV
APE HW: 256
Lock info ===========
IMEI       : 3552160321xxxxx
IMEI spNet : 3A 55 12 06 23 41 65 05 
IMEI svNet : 33 55 12 06 23 41 65 55 F7 

Conf key     : 0000000000000000
Provider key : 2440700000000000
Country      : Finland
Operator     : NOKIA (Open)
Counters     : Key 0  [3] , Fbus 0  [10]
Blocks       : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version : 
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method 

Done!

Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:07
  Reply With Quote
The Following User Says Thank You to syed tuqeer For This Useful Post:
Old 02-07-2015, 06:05   #21006 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,878
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,947
Asha 301 Read Code Done :)

Code:
Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len  : 0x16
IF xCPUID    : XGOLD 618 [XMM6180 QUARK]
IF uCHIPID    :  50A9180920241654
IF Resp Data  :  50A9070100030101

Wait for user action : Insert battery

Sending EBL Loader ...
EBL Loader Ok
EBL Loader ready
Sending EBL ...
EBL sent Ok
EBL : QUARK_1315.400_M1S1
QUARK EEP config Ok
FLASHID : EC004000 , [ MuxOneNAND ]
Boot conf set, Target Ready
Boot done!



SL3 Simlock read (XGOLD) ... Ok
WMDRM Key read ... Ok
CMLA Key read ... Ok

SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
CMLA_KEY Data saved...

RPL saved : F:\1+Flashing Software\1+BEST\InfinityBox\BEST\Backup\Cert\_2nd_XG618_SIM.rpl

Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia 301 Dual SIM
Software ver : V 09.04 03-12-13 RM-839 (c) Nokia            
IMEI 1  :      3578850558xxxxx
IMEI 2  :      3578850558xxxxx
XappVer :      000007DA
PPM     :      V 09.04 03-12-13 RM-839 (c) Nokia             M2
CNT     :      Content: m2_059Q9B5 V 09.04 10-12-13 RM-839 (c) Nokia            
Product SN   :     261AB25BH
Product code :     059Q9B5
Base Prd.code:     059P5R3
Module code  :     0205270
Long Prod.SN :     0
Hardware info=======
HWID  : 1200
Retu  : PMU_MAXIM8939B
Batery: 3779 mV
CMT BT: 19e2-4702G12
LCDVer: TPO
Lock info ===========
IMEI       : 3578850558xxxxx
IMEI spNet : 3A 75 88 05 55 38 78 02 
IMEI svNet : 33 75 88 05 55 38 78 22 F3 

Sl Conf  : 001-01-00000000000
Sl Prof  : 800000000004000-B
Sl Aux   : 000B0000
Hw Sig   : 924A51398480BA22
Country      : Test SIM (Open)
Operator     : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

CRT308 Backup Created

CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version : 
PA_SL30 (20 digit) phone detected...

User Code : 25836
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!
  Reply With Quote
The Following User Says Thank You to syed tuqeer For This Useful Post:
Old 02-07-2015, 08:29   #21007 (permalink)
No Life Poster
 
DUNIYA JAMAL's Avatar
 
Join Date: Oct 2005
Location: Zimbabwe
Posts: 1,911
Member: 192810
Status: Offline
Sonork: Some people NEED change
Thanks Meter: 852
Nokia 108 Blinking Problem Done by Best Dongle

Code:
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 298 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : B6205324FA52D2E30FC4D174FB977980
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.12.06.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
SecureDecrypt : RM-944_ROM_eMP_20.06.11
SecureDecrypt : RM-944_VIVA_eMP_20.06.11
SecureDecrypt : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
SecureDecrypt : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
SecureDecrypt : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
OVRLP : 000069B900000001
PHPID : Bree.12.06.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x0001B000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-944_ROM_eMP_20.06.11
Write : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
Write : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
Write : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
Write : RM-944_VIVA_eMP_20.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-944_ROM_eMP_20.06.11
[VERIFY] DONE : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
[VERIFY] DONE : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
[VERIFY] DONE : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
[VERIFY] DONE : RM-944_VIVA_eMP_20.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:05
Reboot phone Ok

Connect phone on selected interface...
  Reply With Quote
The Following User Says Thank You to DUNIYA JAMAL For This Useful Post:
Old 02-07-2015, 08:34   #21008 (permalink)
No Life Poster
 
DUNIYA JAMAL's Avatar
 
Join Date: Oct 2005
Location: Zimbabwe
Posts: 1,911
Member: 192810
Status: Offline
Sonork: Some people NEED change
Thanks Meter: 852
Qmobile A110 (MT6572 NAND) Read Dump File Done

Code:
Operation : Read Flash [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 247 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00C800F4000000000000000000000000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0090 , [Gigadevice] GD5F4GQ4UAYIG
[NAND] : FLASH_DIE : 00C8 00F4 0000 0000 0000 0001 0BC3
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Read Ok , collect info
MTKxCPU   : MT6572
MTKxPRJ   : s3520ap
Saved to : C:\Users\Fahad Irfan\Desktop\Qmobile A110\MT6572__s3520ap.ispff

Done!
Elapsed: 00:05:05
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to DUNIYA JAMAL For This Useful Post:
Old 02-07-2015, 09:11   #21009 (permalink)
Product Manager
 
FullFlashPak's Avatar
 
Join Date: May 2008
Location: GPGIndustries
Posts: 9,398
Member: 782530
Status: Offline
Thanks Meter: 8,118
G five g6 presdent mt6582 read factory file

Chinese Miracle II [MTK module] v 1.10

Operation : Read Flash [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582|8312_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D3034472813C923E8111F
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : G40ME
[eMMC] : FLASH_CID : 45010053454D3034472813C923E8111F
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : GFIVE
ProdName : K28
ProdModel : GFIVE president(G6)
Device : K28
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.MP.V1.5

[Read Ok] : preloader_vanzo82_wet_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / vanzo82_wet_jb5 / EMMC
FW Size : 678 MiB
Scatter saved to : E:\QMOBILE ANDORID\G FIVE G6 PRESDENT MT6582 READ WORKING\MT6582__GFIVE__GFIVE president(G6)__K28__4.2.2__ALPS.JB5.MP.V1.5\

All done!

Done!
Elapsed: 00:03:42
Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to FullFlashPak For This Useful Post:
Old 02-07-2015, 11:23   #21010 (permalink)
No Life Poster
 
.::TEJARAM::.'s Avatar
 
Join Date: Nov 2011
Location: .::INDIA::.
Age: 30
Posts: 3,462
Member: 1681461
Status: Offline
Sonork: 100.1650339[OFFLINE]
Thanks Meter: 1,004
Nokia 210 Blinking Problem Done by Best


  Reply With Quote
The Following User Says Thank You to .::TEJARAM::. For This Useful Post:
Old 02-07-2015, 11:26   #21011 (permalink)
No Life Poster
 
.::TEJARAM::.'s Avatar
 
Join Date: Nov 2011
Location: .::INDIA::.
Age: 30
Posts: 3,462
Member: 1681461
Status: Offline
Sonork: 100.1650339[OFFLINE]
Thanks Meter: 1,004
Nokia C1-01 Blinking Problem Done by Best


  Reply With Quote
The Following User Says Thank You to .::TEJARAM::. For This Useful Post:
Old 02-07-2015, 16:12   #21012 (permalink)
No Life Poster
 
DUNIYA JAMAL's Avatar
 
Join Date: Oct 2005
Location: Zimbabwe
Posts: 1,911
Member: 192810
Status: Offline
Sonork: Some people NEED change
Thanks Meter: 852
Nokia C2-03 hang on Logo Done by Best Dongle

Code:
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm702__07.29.mcusw
PPM : rm702__07.29.ppm_m_a
CNT : rm702__07.29.image_m_a_059M7D7
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 359735041783067
IMEI 2 : 359735041783075
PCcode : 059D436

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : E:\InfinityBox\BEST\Backup\Cert\359735041783067_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm702__07.29.mcusw
Image : rm702__07.29.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:02 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01B40000
Erasing, wait ... 
Erase done, time : 00:00:54 
Write , Start : 0x40280000 , Len : 0x01AC0000
Flashing , wait ...
Region flash done, time : 00:00:35
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
CRC check passed , 0x560C

   ===Flashing [PPM]===
File : rm702__07.29.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41DC0000 , Len : 0x00700000
Erasing, wait ... 
Erase done, time : 00:00:10 
Write , Start : 0x41DC0000 , Len : 0x003FB3A0
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0xCA66

   ===Flashing [CNT]===
File : rm702__07.29.image_m_a_059M7D7
Image : package_m_a_059M7D7.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x424C0000 , Len : 0x01960000
Erasing, wait ... 
Erase done, time : 00:00:56 
Write , Start : 0x424C0000 , Len : 0x00C00000
Flashing , wait ...
Region flash done, time : 00:00:15
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:02 
No write data, skip
CRC check passed , 0xC7A7

Flashing done!
Total flash time : 00:03:04
Reboot phone now...

Reading Phone Info....
Connected phone -   C2-03
Software Info:     V 07.29 29-11-11 RM-702 (c) Nokia            
IMEI:  359735041783067
PPM version :   V 07.29 29-11-11 RM-702 (c) Nokia             M_A
Product code:  059D436
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:45
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info...  - Ok
  Reply With Quote
The Following User Says Thank You to DUNIYA JAMAL For This Useful Post:
Old 02-07-2015, 16:24   #21013 (permalink)
No Life Poster
 
DUNIYA JAMAL's Avatar
 
Join Date: Oct 2005
Location: Zimbabwe
Posts: 1,911
Member: 192810
Status: Offline
Sonork: Some people NEED change
Thanks Meter: 852
Qmobile A290 Read Factory Flash file & Write Other Faulty Phone Done by SP Tool


Code:
Operation : Read Flash [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 78 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A483447316404050FA2C158A1E5
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A483447316404050FA2C158A1E5
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : QMobile
ProdName  : QMobile A290
ProdModel : QMobile A290
Device    : QMobile A290
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_s5201ap.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / s5201ap / EMMC
FW Size : 929 MiB
Scatter saved to : C:\Users\Fahad Irfan\Desktop\Qmobile\MT6572__QMobile__QMobile A290__QMobile A290__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:04:14
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to DUNIYA JAMAL For This Useful Post:
Old 02-08-2015, 05:40   #21014 (permalink)
Product Manager
 
FullFlashPak's Avatar
 
Join Date: May 2008
Location: GPGIndustries
Posts: 9,398
Member: 782530
Status: Offline
Thanks Meter: 8,118
Q MOBILE X400 READ FACTORY FILE

Code:
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582|8312_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3758564D42016671EA50811B
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42016671EA50811B
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 


[Read Ok] : preloader_gionee82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : spdata.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / gionee82_cwet_kk / EMMC
FW Size : 1324 MiB
Scatter saved to : D:\QMOBILE ANDORID\Q MOBILE X400 MT6582 FACTORY FILE\MT6582______\

All done!

Done!
Elapsed: 00:06:36
Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to FullFlashPak For This Useful Post:
Old 02-08-2015, 07:53   #21015 (permalink)
Moderator
 
...:::::NP™:::::...'s Avatar
 
Join Date: Nov 2009
Location: ZA
Age: 36
Posts: 9,574
Member: 1162626
Status: Offline
Sonork: 100.1591727 QQ:2337938173
Thanks Meter: 9,424
Nokia 225 Blinking Repair Done

Code:
Core : v2.01 , MTKx FlashEngine : v6.8

Verify files ... 
MAUI : RM-1011_ROM_eMP_10.01.11
VIVA : RM-1011_VIVA_eMP_10.01.11
LANG : RM-1011_LANG_PACK_ROM_IC_eMP_10.01.11_001
CUST : RM-1011_CUSTPACK_ROM_IC_MEA_SY_eMP_10.01.11_001
JMPT : RM-1011_JUMP_TABLE_IC_MEA_SY_eMP_10.01.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 291 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : A0076EDF105898CC21289B2AD9C8CF12
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.20.10.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
SecureDecrypt : RM-1011_ROM_eMP_10.01.11
SecureDecrypt : RM-1011_VIVA_eMP_10.01.11
SecureDecrypt : RM-1011_LANG_PACK_ROM_IC_eMP_10.01.11_001
SecureDecrypt : RM-1011_CUSTPACK_ROM_IC_MEA_SY_eMP_10.01.11_001
SecureDecrypt : RM-1011_JUMP_TABLE_IC_MEA_SY_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : PEARL.20.10.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x00040000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1011_ROM_eMP_10.01.11
Write : RM-1011_LANG_PACK_ROM_IC_eMP_10.01.11_001
Write : RM-1011_CUSTPACK_ROM_IC_MEA_SY_eMP_10.01.11_001
Write : RM-1011_JUMP_TABLE_IC_MEA_SY_eMP_10.01.11_001
Write : RM-1011_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1011_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1011_LANG_PACK_ROM_IC_eMP_10.01.11_001
[VERIFY] DONE : RM-1011_CUSTPACK_ROM_IC_MEA_SY_eMP_10.01.11_001
[VERIFY] DONE : RM-1011_JUMP_TABLE_IC_MEA_SY_eMP_10.01.11_001
[VERIFY] DONE : RM-1011_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:42
Reboot phone Ok


Br

Palash Ahammad
__________________
Use Search Button to get Instant Result | Follow Forum Rules
Avoid Spams in the forum to prevent ban your account.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 16:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 08:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 23:17.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.79143 seconds with 9 queries

SEO by vBSEO