GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 07-17-2017, 16:46   #43606 (permalink)
Freak Poster
 
anoamocreative's Avatar
 
Join Date: Dec 2008
Location: Indonesia
Posts: 443
Member: 919549
Status: Offline
Thanks Meter: 132
Advan T2F


Read Flash
Code:
Wait for device ... 
Device Connected!
Interface test : Passed

Machine : RK3066
Device  : ADVAN T2F
ExtInfo : 4.4.2

Flash CSx  : 0x00
Flash Type : ADD7949160 [ NAND ] 
Flash Vend : HYNIX
Flash Size : 0x0000000105800000 ( 4.09 GiB )
Flash Info : 2097152/8192/32/40/1

Connect Ok!

Brand     : ADVAN
ProdName  : rk3188
ProdModel : ADVAN T2F
Device    : rk3188
AndroidVer: 4.4.2
Manufact. : rockchip
SysPatch  : KOT49H
RKTxCPU   : RK3188

DevInfo : RK3188__rockchip__ADVAN__ANDR_v4.4.2__ADVAN_T2F__rk3188__rk3188

Reading Flash Content ... 

[Read Ok] : param.cfg
[Read Ok] : misc.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : backup.img
[Read Ok] : system.img

Android Info saved!

Read finished!
Configuration : RK3066 / ADD7949160 [ NAND ] 
Firmware Size : 708 MiB

Done!
Elapsed: 00:01:32
  Reply With Quote
Old 07-17-2017, 16:48   #43607 (permalink)
Freak Poster
 
anoamocreative's Avatar
 
Join Date: Dec 2008
Location: Indonesia
Posts: 443
Member: 919549
Status: Offline
Thanks Meter: 132
Samsung Clone (J800FN)

Read flash
Code:
Start  at : [7/17/2017 / 12:56:11 PM]
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E355530304D02ADC282308081
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 1501004E355530304D02ADC282308081
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x017EA7628EB0DF73E92709D92C7C6402
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : Samsung
ProdName  : SM-J800FN
ProdModel : SM-J800FN
Device    : j7209
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : J7209_6.0.1_V1.3 20160926-1742

[Read Ok] : preloader_j7209.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / j7209 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 587 MiB
Scatter saved to : C:\Users\a1\Desktop\New folder\MT6572__Samsung__SM-J800FN__j7209__4.2.2__J7209_6.0.1_V1.3_20160926-1742\

All done!

Done!
Elapsed: 00:03:43
  Reply With Quote
Old 07-17-2017, 16:50   #43608 (permalink)
Freak Poster
 
anoamocreative's Avatar
 
Join Date: Dec 2008
Location: Indonesia
Posts: 443
Member: 919549
Status: Offline
Thanks Meter: 132
Oppo 1201

Read Flash
Code:
Start  at : [7/10/2017 / 8:26:59 PM]
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040502A2BEE262F5
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040502A2BEE262F5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x017EA7625982BD8B310C7DA7E611EF29
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : OPPO
ProdName  : 1201
ProdModel : 1201
Device    : 1201
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : 1201EX_11_A.14_160427

[Read Ok] : preloader_oppo82_15066.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / oppo82_15066 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1479 MiB
Scatter saved to : C:\Users\a1\Desktop\New folder\MT6582__OPPO__1201__1201__4.4.2__1201EX_11_A.14_160427\

All done!

Done!
Elapsed: 00:06:43
  Reply With Quote
Old 07-17-2017, 17:47   #43609 (permalink)
No Life Poster
 
sachu2002's Avatar
 
Join Date: Mar 2015
Location: kapurthala punjab
Posts: 1,079
Member: 2362867
Status: Offline
Sonork: ththtuu
Thanks Meter: 659
Donate money to this user
ls5016 frp reset done

Card found : AD4A22C5 , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.13


Operation : Reset Settings [ v1.13 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 0683BFBB
ID_BLOCK_I : 009600E1
ID_BLOCK_L : C83852AC0B979C8F782D2728F7B2C20A
ID_BLOCK_L : 5E359B3227AE10952887C80103E2FCDF
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000/00000200
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!
  Reply With Quote
Old 07-18-2017, 05:31   #43610 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Oppo A33FW Pattren Read Done With Great Infinity CM2

Card found : A19EC787 , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.14


Operation : Read PatternLock [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 25FB3D60
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 659FF501AC3A27221D7282834C179FAF
ID_BLOCK_L : D6AD13BABF26881DB07F50899B6A0447
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Read Ok! Trying decrypt ...
PatternLock sequence : 214589673

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!


  Reply With Quote
Old 07-18-2017, 07:42   #43611 (permalink)
Freak Poster
 
Salman725626's Avatar
 
Join Date: Nov 2015
Location: Pakistan
Age: 24
Posts: 443
Member: 2488001
Status: Offline
Sonork: 100.1669288
Thanks Meter: 295
q mobile x25 dead recover done

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 31 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447316404050CA2AD69C169
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A483447316404050CA2AD69C169
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xDD423B82F50CFAE7A6335FD2FABCC234
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!


Done!
Elapsed: 00:00:21
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6572 , Project : s4011 , Storage : EMMC
Files found : 11 , Set to Flash : 10
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 31 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447316404050CA2AD69C169
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A483447316404050CA2AD69C169
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xDD423B82F50CFAE7A6335FD2FABCC234
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : s4011 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3963 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x00000000E5E00000
Flash Pre-Erase Done, time used : 00:00:03

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_s4011.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:02:38

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:43

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:03:51
Reconnect Power/Cable!
  Reply With Quote
Old 07-18-2017, 08:35   #43612 (permalink)
Freak Poster
 
Salman725626's Avatar
 
Join Date: Nov 2015
Location: Pakistan
Age: 24
Posts: 443
Member: 2488001
Status: Offline
Sonork: 100.1669288
Thanks Meter: 295
Q Mobile A300 Hang On Logo Recover done

Scatter Load Ok , BaseBand : MT6572 , Project : s7810bp , Storage : EMMC
Files found : 12 , Set to Flash : 11
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 31 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048600A3ECFB410D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048600A3ECFB410D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0xDD423B825A14D1218BFB19EDC645054F
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : s7810bp , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3983 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000600000-0x0000000000100000
Erase : 0x0000000002300000-0x00000000E3E00000
Flash Pre-Erase Done, time used : 00:00:03

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_s7810bp.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0013
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash now : FAT
Image Flash Ok
Flash Write Done, time used : 00:02:53

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Verify Passed : FAT
Data Verify Done, time used : 00:00:38

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:03:54
Reconnect Power/Cable!
  Reply With Quote
Old 07-18-2017, 09:15   #43613 (permalink)
No Life Poster
 
bright hlatini's Avatar
 
Join Date: Jul 2011
Location: malawi
Posts: 1,121
Member: 1614640
Status: Offline
Thanks Meter: 468
[B]archos SCAC40NE_ALBA frp unlock done
[/B

Card found: S/N : xxxxxxx , v0135
Chinese Miracle II [SPD module] v 1.24

Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 103 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : SCAC40NE_ALBA
Model Brand : archos
Model Device: ac40ne
AndrVersion : 5.1
BaseBand CPU: SP7731GEA
CompileDate : 5/24/2016 6:02:45 PM
Project Ver : [email protected] orodosma
Model Ext : ALBA 4

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:31

Reconnect Power/Cable!


Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 103 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000013C2F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:25

Reconnect Power/Cable!
  Reply With Quote
Old 07-18-2017, 09:19   #43614 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 2,079
Member: 118520
Status: Offline
Thanks Meter: 3,551
Infinity-Box Android Service Tool / AST v1.00

Successfully REMOVE FRP (MOTO G3 MODEL NO XT1550)USB

Operation : Enable ADB (Moto) [ v1.0 ]

Waiting for NetInterface arrival ...
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!

Waiting ...
Trying link with : 192.168.137.2
Connected to device!

Device : XT1550
VerInfo : OSPREY_APAC_CUST
Version : Blur_Version.24.226.17.osprey_retasia_ds_2gb.retas ia.en.03

Enabling ADB ...

1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON'
2. Select 'FACTORY MODE' and press 'POWER ON'!
3. Wait for device boot completely!

Done!
Elapsed: 00:00:09
################################################## ################################################## ####
Operation : Reset FRP (ADB) [ v1.0 ]

Waiting for device in ADB mode ...
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Connect Ok!

Device : osprey_retasia_ds_2gb
Model : MotoG3
FRP reset passed! Make FACTORY RESET from menu!

Done!
Elapsed: 00:00:08

THANKS INFINITY-BOX TEAM
  Reply With Quote
Old 07-18-2017, 12:39   #43615 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,857
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,419
Smile Qmobile X2 Energy Format And Read Factory Firmware Done

Code:
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 19 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473265050732DB8CADB351
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265050732DB8CADB351
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xE6C52A7D3C1FDFF22A7136D9598D6085
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:53
Reconnect Power/Cable!

Code:
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 19 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473265050732DB8CADB351
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265050732DB8CADB351
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xE6C52A7D3C1FDFF22A7136D9598D6085
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : QMobile
ProdName  : ENERGY_X2
ProdModel : QMobile ENERGY X2
Device    : ENERGY_X2
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.W10.24.p0

[Read Ok] : preloader_v3800.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3800 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2870 MiB
Scatter saved to : C:\Users\Akhtar Ali\Desktop\MT6580__QMobile__QMobile_ENERGY_X2__ENERGY_X2__6.0__ALPS.W10.24.p0\

All done!

Done!
Elapsed: 00:12:21
Reconnect Power/Cable!
  Reply With Quote
Old 07-18-2017, 12:55   #43616 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: TITI 2002 SERVIS CELULAR PG/AL
Posts: 4,174
Member: 193804
Status: Offline
Sonork: 100.1684818
Thanks Meter: 1,685
Wink generale mobile 4g frp done

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 1779C3F8
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 8D776DE944D2DFCAB5EA6A6BB48F0747
ID_BLOCK_L : 5023ED3C31A00A9B3EF9D20B199482C9
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand : google
Device : seed
AndroidVer: 7.1.1
Manufact. : import /oem/oem.prop ro.product.manufacturer
SysPatch : N0F27E
QLMxCPU : MSM8916

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

Operation : Reset Settings [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 1779C3F8
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 8D776DE944D2DFCAB5EA6A6BB48F0747
ID_BLOCK_L : 5023ED3C31A00A9B3EF9D20B199482C9
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!
  Reply With Quote
Old 07-18-2017, 14:54   #43617 (permalink)
Freak Poster
 
kamranas's Avatar
 
Join Date: Nov 2009
Location: Mirpur Azad Kashmir
Age: 34
Posts: 279
Member: 1154111
Status: Offline
Sonork: 100.1620855
Thanks Meter: 158
IMO Q UNLOCK DONE InfinityBox CM2SPD

Card found: S/N : 8479FB97 , v0136
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : SP Unlock [ v1.27 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 23 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:00:30

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to kamranas For This Useful Post:
Old 07-18-2017, 16:18   #43618 (permalink)
No Life Poster
 
sky73's Avatar
 
Join Date: Jan 2013
Location: gsmhosting
Age: 29
Posts: 1,148
Member: 1876736
Status: Offline
Thanks Meter: 735
y625-u32 read firmware and downgrade build done
fast read
fast write
Code:
Operation : Read Flash [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 0B06894C
ID_BLOCK_I : 008140E1
ID_BLOCK_L : 59ABC13D9806333EE95EB69F5823B39B
ID_BLOCK_L : DDB01EB1A22D9D16AB0A4F848E617F5C
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!


Brand     : HUAWEI
ProdName  : Y625-U32
ProdModel : HUAWEI Y625-U32
Device    : 8212
AndroidVer: 4.4.2
Manufact. : HUAWEI
QLMxCPU   : MSM8610

DevInfo : MSM8610__HUAWEI__HUAWEI__ANDR_v4.4.2__HUAWEI_Y625-U32__8212__Y625-U32

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : misc.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : lsplash.img
[Read Ok] : fs_gc.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1492 MiB

Done!
Elapsed: 00:02:39

Reconnect Power/Cable!

Loading firmware ... 
Loading 1 program definition file(s) ... 
Load Ok!

Operation : Flash [ v1.14 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 0B06894C
ID_BLOCK_I : 008140E1
ID_BLOCK_L : 59ABC13D9806333EE95EB69F5823B39B
ID_BLOCK_L : DDB01EB1A22D9D16AB0A4F848E617F5C
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Flash Chain : 67
Flashing now

Flashing : sbl1.mbn
Flashing : sdi.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : misc.bin
Flashing : NON-HLOS.bin
Flashing : boot.img
Flashing : system_1.unsparse
Flashing : system_2.unsparse
Flashing : system_3.unsparse
Flashing : system_4.unsparse
Flashing : system_5.unsparse
Flashing : system_6.unsparse
Flashing : system_7.unsparse
Flashing : system_8.unsparse
Flashing : system_9.unsparse
Flashing : system_10.unsparse
Flashing : system_11.unsparse
Flashing : system_12.unsparse
Flashing : system_13.unsparse
Flashing : system_14.unsparse
Flashing : system_15.unsparse
Flashing : system_16.unsparse
Flashing : system_17.unsparse
Flashing : system_18.unsparse
Flashing : system_19.unsparse
Flashing : system_20.unsparse
Flashing : system_21.unsparse
Flashing : system_22.unsparse
Flashing : system_23.unsparse
Flashing : system_24.unsparse
Flashing : persist_1.unsparse
Flashing : cache_1.unsparse
Flashing : recovery.img
Flashing : splash.img
Flashing : userdata_1.unsparse
Flashing : userdata_2.unsparse
Flashing : userdata_3.unsparse
Flashing : userdata_4.unsparse
Flashing : userdata_5.unsparse
Flashing : userdata_6.unsparse
Flashing : userdata_7.unsparse
Flashing : userdata_8.unsparse
Flashing : userdata_9.unsparse
Flashing : userdata_10.unsparse
Flashing : userdata_11.unsparse
Flashing : userdata_12.unsparse
Flashing : userdata_13.unsparse
Flashing : userdata_14.unsparse
Flashing : userdata_15.unsparse
Flashing : userdata_16.unsparse
Flashing : userdata_17.unsparse
Flashing : userdata_18.unsparse
Flashing : userdata_19.unsparse
Flashing : userdata_20.unsparse
Flashing : userdata_21.unsparse
Flashing : gpt_main0.bin
Flashing : gpt_backup0.bin

Flash sequence completed!

Applying patches for storage # 0
Records : 26
Patch sequence completed!

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:02:10

Reconnect Power/Cable!
  Reply With Quote
Old 07-18-2017, 16:38   #43619 (permalink)
No Life Poster
 
wutangclan33's Avatar
 
Join Date: Jul 2011
Location: dunia antah berantah
Posts: 605
Member: 1616754
Status: Offline
Thanks Meter: 245
Read Pattern Oppo F1s A1601 Done

Thanks to Nasir Mobile

use this file http://forum.gsmhosting.com/vbb/f296.../#post12503963






  Reply With Quote
The Following 2 Users Say Thank You to wutangclan33 For This Useful Post:
Old 07-19-2017, 02:05   #43620 (permalink)
Junior Member
 
Join Date: Jun 2017
Location: SOUTH AFRICA
Posts: 2
Member: 2730820
Status: Offline
Thanks Meter: 0
I love cm2

Sent from my SM-J111F using Tapatalk
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 18:44.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.52212 seconds with 10 queries

SEO by vBSEO