GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box


Reply
 
LinkBack Thread Tools Display Modes
Old 08-09-2018, 16:07   #51991 (permalink)
Freak Poster
 
Join Date: Jul 2018
Posts: 121
Member: 2852587
Status: Offline
Thanks Meter: 78
Gfive Z7 Flash file Read BY Cm2 Lovely Tool


[CENTER]Gfive Z7 Flash file Read BY Cm2 Lovely Tool

[/CENTER

https://mega.nz/#!9jxRESbS!MPH4FZfSwmwPr74WQR_JJBh7xIxXoK3hSQ_XXKM miGw

I AM
Rocky Handsome

Br Mirza asim
  Reply With Quote
Old 08-09-2018, 16:25   #51992 (permalink)
Freak Poster
 
Join Date: Jul 2018
Posts: 121
Member: 2852587
Status: Offline
Thanks Meter: 78
Rivo C12 Firmware read By Cm2 Grate King Tool

Rivo C12 Firmware read By Cm2 Grate King Tool


Quote:
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 115 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CA02
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 1D048BF90F993F5298006BEE6AAE8E5A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : HONGYU61M_11C_PCB01_gprs_MT6261_S00.C219A1_ADKS_OD 19_RIVO_2_V1_2_20171010.bin
FileVersion : C219A1_ADKS_OD19_RIVO_2_V1.2_20171010
Saved to : C:\InfinityBox\CM2MTK\Read_out\HONGYU61M_11C_PCB01 _gprs_MT6261_S00.C219A1_ADKS_OD19_RIVO_2_V1_2_2017 1010.bin

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!

https://mega.nz/#!QyRDSabT!uhLi5PMsNQQY4F2vOQ-PYIDJtTag1fp_mgMAWuHm9_Q

I am Rocky Handsome

Br Mirza asim
  Reply With Quote
Old 08-09-2018, 18:09   #51993 (permalink)
Freak Poster
 
Join Date: Feb 2008
Location: Faisalabad Pakistan
Posts: 320
Member: 696491
Status: Offline
Thanks Meter: 116
Alcatel 4554g firmware and security read done !!

USE EDL CABLE TO CONNECT THAT PHONE

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 02A10F94
ID_BLOCK_L : 11D38975E04E7B765106CED7106BEBE3
ID_BLOCK_L : 780BB514198832B356A1EA2321CCDAE1
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!


Brand : TCL
ProdName : 5048
ProdModel : 5048
Device : Pixi4554G
AndroidVer: 6.0.1
Manufact. : TCL
QLMxCPU : MSM8909

DevInfo : MSM8909__TCL__TCL__ANDR_v6.0.1__5048__Pixi4554G__5 048

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : boot.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : splash.img
[Read Ok] : secro.img
[Read Ok] : misc.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : tctperso.img
[Read Ok] : system.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 2008 MiB

Done!
Elapsed: 00:04:59

Reconnect Power/Cable!

Operation : EDL Security Operation [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 02A10F94
ID_BLOCK_L : 11D38975E04E7B765106CED7106BEBE3
ID_BLOCK_L : 780BB514198832B356A1EA2321CCDAE1
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\InfinityBox\CM2QLM\Backup\MSM8909_[009600E1]_02A10F94_SEC\

Done!
Elapsed: 00:00:39
  Reply With Quote
Old 08-09-2018, 18:12   #51994 (permalink)
Freak Poster
 
Join Date: Feb 2008
Location: Faisalabad Pakistan
Posts: 320
Member: 696491
Status: Offline
Thanks Meter: 116
LENOVO A6020a46 FIRMWARE AND SECURITY READ DONE !!

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0679A6C7
ID_BLOCK_E : 00010001
ID_BLOCK_L : 1FC377C00E3EC4876E6EF6A4ED713475
ID_BLOCK_L : F9F87D857DF390452313E9D70D53D3D5
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand : Lenovo
ProdName : A6020a46
ProdModel : Lenovo A6020a46
Device : A6020a46
AndroidVer: 5.1.1
Manufact. : LENOVO
QLMxCPU : MSM8916

DevInfo : MSM8916__LENOVO__Lenovo__ANDR_v5.1.1__Lenovo_A6020 a46__A6020a46__A6020a46

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 1914 MiB

Done!
Elapsed: 00:04:28

Reconnect Power/Cable!

Operation : EDL Security Operation [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0679A6C7
ID_BLOCK_E : 00010001
ID_BLOCK_L : 1FC377C00E3EC4876E6EF6A4ED713475
ID_BLOCK_L : F9F87D857DF390452313E9D70D53D3D5
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\InfinityBox\CM2QLM\Backup\MSM8936_[0090B0E1]_0679A6C7_SEC\

Done!
Elapsed: 00:00:13
  Reply With Quote
Old 08-09-2018, 18:16   #51995 (permalink)
Freak Poster
 
Join Date: Feb 2008
Location: Faisalabad Pakistan
Posts: 320
Member: 696491
Status: Offline
Thanks Meter: 116
Lenovo a6010 read flash and security done with cm2 !!

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 1CC48912
ID_BLOCK_L : 97510BF362C8F5F0AF844C519EE56D5D
ID_BLOCK_L : 9FF658F3E46FDF54694409C6CC233D1E
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand : Lenovo
ProdName : A6010
ProdModel : Lenovo A6010
Device : A6010
AndroidVer: 5.0.2
Manufact. : LENOVO
QLMxCPU : MSM8916

DevInfo : MSM8916__LENOVO__Lenovo__ANDR_v5.0.2__Lenovo_A6010 __A6010__A6010

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 1991 MiB

Done!
Elapsed: 00:04:10

Operation : EDL Security Operation [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 1CC48912
ID_BLOCK_L : 97510BF362C8F5F0AF844C519EE56D5D
ID_BLOCK_L : 9FF658F3E46FDF54694409C6CC233D1E
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\InfinityBox\CM2QLM\Backup\MSM8916_[007050E1]_1CC48912_SEC\

Done!
Elapsed: 00:00:31
  Reply With Quote
Old 08-09-2018, 18:33   #51996 (permalink)
Freak Poster
 
Join Date: Feb 2008
Location: Faisalabad Pakistan
Posts: 320
Member: 696491
Status: Offline
Thanks Meter: 116
Rivo c4000 rda chip read flash done with link

Operation : Read Flash [ v1.03 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C00220
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details :
[0] : S03_shx_c19_rivo
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_rda6625
[5] : flsh_spi32m
[6] : gc9102/gc9105/gc9106/nv3021/st7735rsmall/rm68116/st7789v
[7] : bf3a01serial/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : S03_SHX_C19_RIVO_YH9105HSD_HXW9106LT_KKS7735HSD_V0 3_20171019
[12] : 2017-10-19_16:48:45
[13] : test_version

Saved to : C:\Users\XXXX\Desktop\READ\
Saved as : SC6533G_4MiB_S03_shx_c19_rivo_2017-10-19_164845.ilod

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!

DOWNLOAD
  Reply With Quote
Old 08-09-2018, 19:05   #51997 (permalink)
Freak Poster
 
Join Date: Jul 2018
Posts: 121
Member: 2852587
Status: Offline
Thanks Meter: 78
TCL S720 Firmware Read By King Tool Cm2

TCL S720 Firmware Read By King Tool Cm2


Quote:
Reading Flash Content now ...

Brand : TCL
ProdName : TCL_S720
ProdModel : TCL S720
Device : Cross5.5
AndroidVer: 4.2.2
MTKxCPU : MT6592
MTKxPRJ : ALPS.JB9.MP.V1.4

[Read Ok] : preloader_s600w.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / s600w / EMMC
Android Info saved
FW Size : 739 MiB
Scatter saved to : G:\MT6592__TCL__TCL_S720__Cross5.5__4.2.2__ALPS.JB 9.MP.V1.4\

All done!

Done!
Elapsed: 00:04:48
Reconnect Power/Cable!
I AM
Rocky handsome

Br Mirza asim
  Reply With Quote
The Following User Says Thank You to rockyhansome For This Useful Post:
Old 08-09-2018, 19:29   #51998 (permalink)
Freak Poster
 
Join Date: Feb 2008
Location: Faisalabad Pakistan
Posts: 320
Member: 696491
Status: Offline
Thanks Meter: 116
VIVO Y53 (1606) FIRMWARE DOWNLOAD LINK
DOWNLOAD FILE LINK IS HERE

Last edited by netvision123; 08-09-2018 at 19:31. Reason: DOWNLOAD LINK
  Reply With Quote
Old 08-09-2018, 20:08   #51999 (permalink)
No Life Poster
 
Yusuf Lawal's Avatar
 
Join Date: Oct 2011
Location: Nigeria
Posts: 4,977
Member: 1677653
Status: Offline
Thanks Meter: 1,818
Donate money to this user
ITEL IT2150 FORMAT DONE

Operation : Identify [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] : 359135088117206
IMEI[2] : 359135088117214

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_0A6 4F783495A_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Yusuf Lawal For This Useful Post:
Old 08-09-2018, 20:09   #52000 (permalink)
No Life Poster
 
Yusuf Lawal's Avatar
 
Join Date: Oct 2011
Location: Nigeria
Posts: 4,977
Member: 1677653
Status: Offline
Thanks Meter: 1,818
Donate money to this user
TECNO CX REPAIR SECURITY DONE
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D42072AE69B2534E9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xDEC55C375BAF6E57BB7D2B141E5921DF
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

[AP] : Initial info read Ok!

Brand : TECNO
ProdName : H501
ProdModel : TECNO Camon CX
Device : TECNO-CX
AndroidVer: 7.0
MTKxCPU : MT6755
MTKxPRJ : CX-H501DEFG-N-180314V177

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!



Operation : Repair Security [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D42072AE69B2534E9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xDEC55C375BAF6E57BB7D2B141E5921DF
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!


IMEI [00] : 000000000000000
IMEI [01] : 000000000000000

Set IMEI [00] : 355532085XXXXXX
Set IMEI [01] : 355532085XXXXXX
Prepare finished. Security check required!

Wait for phone...
Phone found! [ 6 ]
Sync...
Repair done!

Done!
Elapsed: 00:00:58
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Yusuf Lawal For This Useful Post:
Old 08-09-2018, 20:09   #52001 (permalink)
No Life Poster
 
Yusuf Lawal's Avatar
 
Join Date: Oct 2011
Location: Nigeria
Posts: 4,977
Member: 1677653
Status: Offline
Thanks Meter: 1,818
Donate money to this user
TECNO K7 REMOVE FRP DONE
Card found : S/N : A6936825 , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464536324D42037255E02EA4ED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM26E
[eMMC] : FLASH_CID : 150100464536324D42037255E02EA4ED
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xDEC55C379F0665CFA45F0B9FE22E8DFE
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : TECNO
ProdName : H8019
ProdModel : TECNO K7
Device : TECNO-K7
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : K7-H8019A-N-171024V113

SECURITY :
IMEI_SW [1] : 354988090XXXXXX
IMEI_SW [2] : 354988090XXXXXX
BTMAC Addr : C4C563362783
WiFi MAC : C4C5633675A3

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464536324D42037255E02EA4ED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM26E
[eMMC] : FLASH_CID : 150100464536324D42037255E02EA4ED
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xDEC55C379F0665CFA45F0B9FE22E8DFE
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Yusuf Lawal For This Useful Post:
Old 08-10-2018, 04:31   #52002 (permalink)
Freak Poster
 
abikarki's Avatar
 
Join Date: Jan 2017
Location: Bardibas
Age: 27
Posts: 246
Member: 2670396
Status: Offline
Thanks Meter: 122
MT6572_NAND_alps__ENES__A20__c799_q39_a20__5.0.1__ ALPS.KK1.MP7.V1.5_Read_With_CM2_BY_GSM_Abinash

Operation : Read Flash [ v1.58 ]

Power Off Phone , re-connect battery , Insert USB cable!

Wait for phone...
Phone found! [ 6 ]
Sync...
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8B00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00EC00BC00000066005600EC00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008D , [SAMSUNG] KA100O015E_BJTT/KF94G16Q4V
[NAND] : FLASH_DIE : 00EC 00BC 0000 0066 0056 00EC 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/00/NIM_Px-1
DEV RID : 0x444A22FCC436841053417621FC18BEC2
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_c799_q39_a20.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / c799_q39_a20 / NAND
FW Size : 297 MiB

Brand : alps
ProdName : c799_q39_a20
ProdModel : A20
Device : c799_q39_a20
AndroidVer: 5.0.1
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.V1.5

Android Info saved

Scatter saved to : C:\Users\GSM-Abinash\Desktop\New folder\MT6572_NAND_alps__ENES__A20__c799_q39_a20__ 5.0.1__ALPS.KK1.MP7.V1.5

Done!
Elapsed: 00:02:31
Reconnect Power/Cable!
  Reply With Quote
Old 08-10-2018, 04:34   #52003 (permalink)
Freak Poster
 
abikarki's Avatar
 
Join Date: Jan 2017
Location: Bardibas
Age: 27
Posts: 246
Member: 2670396
Status: Offline
Thanks Meter: 122
Micromax Q3001 FRP Remove Done 1 Click With CM2 SPD

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : Q3001
Model Brand : Micromax
Model Device: Q3001
AndrVersion : 6.0
BaseBand CPU: Q3001
CompileDate : 5/15/2017 11:30:31 AM
Project Ver : MMX_Q3001_SW_V1.8_HW_V4.04_15052017
Model Ext : Micromax Q3001


ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:22

Reconnect Power/Cable!


Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000000548F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:25

Reconnect Power/Cable!
  Reply With Quote
Old 08-10-2018, 04:47   #52004 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: Liton,KALAROA,SATKHIRA
Posts: 2,016
Member: 2556542
Status: Online
Thanks Meter: 815
vivo 1603 firmware backup done

Code:
Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 00C75725
ID_BLOCK_L : 0EC9F2119C03D08E0AE28E6C88B70B58
ID_BLOCK_L : 80C55FB242B0870081DE3273DC300557
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!


Brand     : vivo
ProdName  : PD1613F_EX
ProdModel : vivo 1603
Device    : msm8937_32
AndroidVer: 6.0.1
Manufact. : vivo
QLMxCPU   : MSM8937

DevInfo : MSM8937__vivo__vivo__ANDR_v6.0.1__vivo_1603__msm8937_32__PD1613F_EX

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : oem.img
[Read Ok] : mdtp.img
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : bootbak.img
[Read Ok] : ap.mbn
[Read Ok] : msap.mbn
[Read Ok] : apps.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8937 / eMMC
Firmware Size : 3738 MiB

Done!
Elapsed: 00:08:46

Reconnect Power/Cable!
  Reply With Quote
Old 08-10-2018, 05:14   #52005 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 6,912
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,076
Gfive Polo SPD6531 Pin Reset (Read file)Done With King Infinity CM2


Card found: S/N : A19EC787 , v0137
Chinese Miracle II [SPD module] v 1.27

Set mode to : SPD6531

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:00:06

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : Gfive
Model Name : Polo
ExtInfo Data : Eng
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_W2 5Q32_Eng__Gfive -Polo .bin
Done!

Elapsed: 00:00:40

Reconnect Power/Cable!


  Reply With Quote
The Following User Says Thank You to azhergoga007 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 16:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 08:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 10:16.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.81203 seconds with 9 queries

SEO by vBSEO