GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 01-12-2019, 09:14   #56176 (permalink)
Freak Poster
 
rubelgsm's Avatar
 
Join Date: Jan 2012
Location: Sylhet Korim Ullah Market
Age: 23
Posts: 120
Member: 1714226
Status: Offline
Sonork: 100.1683394
Thanks Meter: 84
Donate money to this user
WE-F1 Frp Done with CM2


  Reply With Quote
The Following 3 Users Say Thank You to rubelgsm For This Useful Post:
Show/Hide list of the thanked
Old 01-12-2019, 09:53   #56177 (permalink)
No Life Poster
 
rahihimkhan's Avatar
 
Join Date: Oct 2007
Location: Dera Ismail Khan (KPK) Pak
Posts: 2,282
Member: 613449
Status: Offline
Sonork: 100.1614074
Thanks Meter: 546
Rm1035 Flashing done

Wait for phone...
Phone found! [ 21 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 216650FAF5A07A3526728929A0526CA9
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_10.01.11
SecureDecrypt : RM-1035_VIVA_eMP_10.01.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_10.01.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
FORMAT FFS : skipped
Rebooting phone now

Flashing done!
Total flash time : 00:00:51
Reboot phone Ok
  Reply With Quote
The Following User Says Thank You to rahihimkhan For This Useful Post:
Old 01-12-2019, 09:56   #56178 (permalink)
No Life Poster
 
rahihimkhan's Avatar
 
Join Date: Oct 2007
Location: Dera Ismail Khan (KPK) Pak
Posts: 2,282
Member: 613449
Status: Offline
Sonork: 100.1614074
Thanks Meter: 546
Rm1035 formating done

Wait for phone...
Phone found! [ 21 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 216650FAF5A07A3526728929A0526CA9
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000

Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Elapsed: 00:00:29
  Reply With Quote
The Following User Says Thank You to rahihimkhan For This Useful Post:
Old 01-12-2019, 12:00   #56179 (permalink)
Insane Poster
 
Join Date: Nov 2016
Posts: 76
Member: 2652531
Status: Offline
Thanks Meter: 53
G950f unlock sim by server infinity done

Waiting for phone...
Device connected: COM781 (SAMSUNG Mobile USB Modem #380)
Connecting...
Reading info...
Phone model: SM-G950F
Phone IMEI: 3528021000000000
Phone version: G950FXXS4CRJD/G950FOXM4CRI5/G950FXXU4ARI1/G950FXXS4CRJD
Trying DIAG mode now...
Waiting for phone...
Device connected: COM782 (SAMSUNG Mobile USB Serial Port)
Connecting...
Analyzing...
Trying to read HWID over diag port...
HWVER: 11105503/00000000
HWID: 0F0000000000000000000000D3E1BF16CD779FEE91E52322C7 831461
Trying to read NVDATA over diag port...
OK - data saved to logfile (LOG\SM-G950F.352802100000000.0F0000000000000000000000D3E1 BF16CD779FEE91E52322C7831461.11105503.2019-01-12.11-28-24.log)
.......... .. .........
All process were done..!


0 Info 2019-01-12 10:28:26 0 System Samsung unlock code (Exynos) 35280001000000000 MCK:82468380;NCK:80574083 COMPLETED

thank's team
  Reply With Quote
The Following 3 Users Say Thank You to proglak For This Useful Post:
Show/Hide list of the thanked
Old 01-12-2019, 12:38   #56180 (permalink)
Freak Poster
 
Join Date: Mar 2015
Location: Nairobi
Posts: 173
Member: 2358876
Status: Offline
Thanks Meter: 66
Help with gowin m5 mt6571 rom

Quote:
Originally Posted by johnmadzeka1 View Post


Card found: S/N 6BXXXXX
Chinese Miracle II [MTK module] v 1.23

Operation : Read Flash [ v1.23 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 41 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E3958524D42008854B2D1A157
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMRX9
[eMMC] : FLASH_CID : 1501004E3958524D42008854B2D1A157
[eMMC] : FLASH_LEN : 0x0000000070000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : android
ProdName : yk858_v20_emmc_lca
ProdModel : android
Device : android
AndroidVer: 4.4.2
MTKxCPU : MT6571
MTKxPRJ : ALPS.KK1.MP7.V1

[Read Ok] : preloader_yk858_v20_emmc_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6571 / V1.1.1 / yk858_v20_emmc_lca / EMMC
FW Size : 506 MiB
Scatter saved to : E:\My Unlocking & Flashing softwares\Chinnies & Tablets\Firmwares Backup\Inifinity Factory Files\MT6571__android__android__android__4.4.2__AL PS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:03:41
Reconnect Power/Cable!

INFINITY IS NO.1

Pliz help me with Link to FILE MINE IS DEAD
  Reply With Quote
Old 01-12-2019, 14:20   #56181 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,791
Member: 2644066
Status: Offline
Thanks Meter: 891
Oppo a37 reset frp done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 266C23AA
ID_BLOCK_L : 3FC9A35BFA606D98473CD439065DD5F5
ID_BLOCK_L : 275EE04B4CD7078C01ECA11E149B95B6
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!
  Reply With Quote
Old 01-12-2019, 14:23   #56182 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,791
Member: 2644066
Status: Offline
Thanks Meter: 891
Che2 tloom hang on logo done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.03

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR


SPRD mode : SC6531 : REV : 0000 : NOR

Operation : Identify [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ]

IMEI[1] : xxxxxxxxxxxxxxxxx
IMEI[2] : xxxxxxxxxxxxxxxxx

Done!
Elapsed: 00:00:15

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00800000_FMT_BACK_1F6 FE8D68619_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
  Reply With Quote
Old 01-12-2019, 14:27   #56183 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,791
Member: 2644066
Status: Offline
Thanks Meter: 891
Callme c790 hang on call done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.03

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR


SPRD mode : SC6531 : REV : 0000 : NOR

Operation : Identify [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] : xxxxxxxxxxxxxxxxx
IMEI[2] : xxxxxxxxxxxxxxxxx

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_186 0E616A4E2_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!
  Reply With Quote
Old 01-12-2019, 14:28   #56184 (permalink)
No Life Poster
 
rahihimkhan's Avatar
 
Join Date: Oct 2007
Location: Dera Ismail Khan (KPK) Pak
Posts: 2,282
Member: 613449
Status: Offline
Sonork: 100.1614074
Thanks Meter: 546
TA-1034 10pic Urdu done in 5 Minats

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : B7B7EC201EB57A00E1B3928E6BA00545
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.10.02.11.p1
BOOT : SWR : 10.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.10.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C8 : 0060 : 0016 : 0000
NOR: [GigaDevice] GD25LQ32
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.02.11 [TA-1034]
DEV SoftwareVersion : 10.02.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Done!
Elapsed: 00:00:28

Reconnect Power/Cable!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 4070F6DB8643BF1A33A51623EBEDDBF6
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.10.02.11.p1
BOOT : SWR : 10.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.10.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.02.11 [TA-1034]
DEV SoftwareVersion : 10.02.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Done!
Elapsed: 00:00:28

Reconnect Power/Cable!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : E3712CE823F6105D76492E2D7B6877AA
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.10.02.11.p1
BOOT : SWR : 10.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.10.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C2 : 0020 : 0016 : 0000
NOR: [MXIC] MX25L3291FWJI_09
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.02.11 [TA-1034]
DEV SoftwareVersion : 10.02.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : C5D91A3A0B7950C4CE190E0A1B076B9C
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.10.02.11.p1
BOOT : SWR : 10.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.10.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C2 : 0020 : 0016 : 0000
NOR: [MXIC] MX25L3291FWJI_09
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.02.11 [TA-1034]
DEV SoftwareVersion : 10.02.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Done!
Elapsed: 00:00:28

Reconnect Power/Cable!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : BF67A5AC5006090447D3C2561EC43B5B
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.10.02.11.p1
BOOT : SWR : 10.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.10.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C2 : 0020 : 0016 : 0000
NOR: [MXIC] MX25L3291FWJI_09
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.02.11 [TA-1034]
DEV SoftwareVersion : 10.02.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 18FCD731967278AD37BA5CC00D6CF1EF
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.10.02.11.p1
BOOT : SWR : 10.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.10.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C2 : 0020 : 0016 : 0000
NOR: [MXIC] MX25L3291FWJI_09
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.02.11 [TA-1034]
DEV SoftwareVersion : 10.02.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Done!
Elapsed: 00:00:28

Reconnect Power/Cable!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : C6710402BD0E1AE4C13905CAD42C218E
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.10.02.11.p1
BOOT : SWR : 10.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.10.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.02.11 [TA-1034]
DEV SoftwareVersion : 10.02.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_10.02.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_10.02.11_001

Done!
Elapsed: 00:00:34

Reconnect Power/Cable!

Open VPLfile : TA-1034_059Z0X8_30.04.11.vpl
Description : TA-1034 IJ
DeviceType : TA-1034
ProductCode : 059Z0X8
SoftwareVer : 30.04.11
PPM LangPack :
[1] : Urdu (Islamic Republic of Pakistan)
[2] : English (United Kingdom)
Load Ok!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 2E453E275EA4A473DFD76B33158713DA
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.30.04.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C8 : 0060 : 0016 : 0000
NOR: [GigaDevice] GD25LQ32
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 30.04.11 [TA-1034]
DEV SoftwareVersion : 30.04.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001

Done!
Elapsed: 00:00:28

Reconnect Power/Cable!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 586E55231584672FE1270235B30F145D
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.30.04.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C8 : 0060 : 0016 : 0000
NOR: [GigaDevice] GD25LQ32
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 30.04.11 [TA-1034]
DEV SoftwareVersion : 30.04.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM21)
MODE : NOKIA USB SERIAL
PORT : 21
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCA02 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 356750B138729CA41795B8522FF56E9F
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.30.04.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C2 : 0020 : 0016 : 0000
NOR: [MXIC] MX25L3291FWJI_09
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 30.04.11 [TA-1034]
DEV SoftwareVersion : 30.04.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
CUST : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
JUMP : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001

Prepare FlashSet :
DCR : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
DCR : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
DCR : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
Write : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
Write : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1034_LANG_PACK_ROM_IJ_eMP_30.04.11_001
Verify : TA-1034_CUSTPACK_ROM_IJ_eMP_30.04.11_001
Verify : TA-1034_JUMP_TABLE_IJ_eMP_30.04.11_001

Done!
Elapsed: 00:00:28

Reconnect Power/Cable!
  Reply With Quote
Old 01-12-2019, 14:34   #56185 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,791
Member: 2644066
Status: Offline
Thanks Meter: 891
Qmobile x2 hang on logo done by cm2


Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : 009800BC009000660076001600080000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID : 0x0B9C44DE19C591CE296A6DFF16B806A4
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : QMobile
ProdName : s3510ap
ProdModel : QMobile X2
Device : s3510ap
AndroidVer: 4.4.2
MTKxCPU : MT6571
MTKxPRJ : ALPS.KK1.MP7.V1

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : 009800BC009000660076001600080000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID : 0x0B9C44DE19C591CE296A6DFF16B806A4
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!
  Reply With Quote
Old 01-12-2019, 14:40   #56186 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,791
Member: 2644066
Status: Offline
Thanks Meter: 891
Qmobile x36 reset frp done by cm2


Card found: S/N : 73CA70CC , v0137
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 7.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : QMobile_X36
Model Brand : QMobile
Model Device: QMobile_X36
AndrVersion : 7.0
BaseBand CPU: X36
CompileDate : 9/20/2017 4:27:17 AM
Project Ver : NRD90M
Model Ext : QMobile X36

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:57

Reconnect Power/Cable!

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000001039F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:54

Reconnect Power/Cable!
  Reply With Quote
Old 01-12-2019, 14:48   #56187 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,791
Member: 2644066
Status: Offline
Thanks Meter: 891
Qmobile c3 reset password done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.03

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR


SPRD mode : SC6531 : REV : 0000 : NOR

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_149 1859C1DC9_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!

  Reply With Quote
Old 01-13-2019, 03:08   #56188 (permalink)
Freak Poster
 
Join Date: Jan 2007
Location: Philippines
Posts: 138
Member: 436121
Status: Offline
Thanks Meter: 35
Vivo V7 PD1718 Oreo 8.1.0 with TP activated

Vivo V7 PD1718 Oreo 8.1.0




Operations

Identify

Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 6278204A
ID_BLOCK_L : F32209EC77FE37532F0963B36F52E6BD
ID_BLOCK_L : 5116EC63916150F1D06DE3BC0B81B486
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!


Brand : vivo
ProdName : msm8953_64
ProdModel : vivo 1718
Device : msm8953_64
AndroidVer: 8.1.0
Manufact. : vivo
SysPatch : OPM1.171019.026
DevComTime: 12/25/2018 9:47:28 AM
QLMxCPU : MSM8953

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00:00:36

Reconnect Power/Cable!


Reset

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 6278204A
ID_BLOCK_L : F32209EC77FE37532F0963B36F52E6BD
ID_BLOCK_L : 5116EC63916150F1D06DE3BC0B81B486
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:39

Reconnect Power/Cable!


Read Firmware

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 6278204A
ID_BLOCK_L : F32209EC77FE37532F0963B36F52E6BD
ID_BLOCK_L : 5116EC63916150F1D06DE3BC0B81B486
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!


Brand : vivo
ProdName : msm8953_64
ProdModel : vivo 1718
Device : msm8953_64
AndroidVer: 8.1.0
Manufact. : vivo
QLMxCPU : MSM8953

DevInfo : MSM8953__vivo__vivo__ANDR_v8.1.0__vivo_1718__msm89 53_64__msm8953_64

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : oem.img
[Read Ok] : mdtp.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : bootbak.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8953 / eMMC
Firmware Size : 4588 MiB

Done!
Elapsed: 00:09:48

Reconnect Power/Cable!


Backup Security

Operation : EDL Security Operation [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 6278204A
ID_BLOCK_L : F32209EC77FE37532F0963B36F52E6BD
ID_BLOCK_L : 5116EC63916150F1D06DE3BC0B81B486
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\InfinityBox\CM2QLM\Backup\MSM8953_[0009A0E1]_6278204A_SEC\

Done!
Elapsed: 00:00:53

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Jastech For This Useful Post:
Old 01-13-2019, 05:35   #56189 (permalink)
No Life Poster
 
rahihimkhan's Avatar
 
Join Date: Oct 2007
Location: Dera Ismail Khan (KPK) Pak
Posts: 2,282
Member: 613449
Status: Offline
Sonork: 100.1614074
Thanks Meter: 546
Q Mobile X30 Flashing

Scatter Load Ok , BaseBand : MT6572 , Project : s4050ap , Storage : EMMC
Files found : 11 , Set to Flash : 10
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447326111014296CC9B2259
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A483447326111014296CC9B2259
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x0CF2E6DE72AAA68A5556E9CAEAF1435C
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : s4050ap , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3763 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x00000000E5E00000
Flash Pre-Erase Done, time used : 00:00:10

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_s4050ap.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:03:05

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:40

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:21
Reconnect Power/Cable!
  Reply With Quote
Old 01-13-2019, 06:02   #56190 (permalink)
No Life Poster
 
rahihimkhan's Avatar
 
Join Date: Oct 2007
Location: Dera Ismail Khan (KPK) Pak
Posts: 2,282
Member: 613449
Status: Offline
Sonork: 100.1614074
Thanks Meter: 546
Wiko ufeel_Fab FRP Done

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065324741995007050B68A3DD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A484147326505075099DDA3530B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0x0CF2E6DE80FE14A9B63938977BD9DED5
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Wiko
ProdName : ufeel_Fab
ProdModel : ufeel Fab
Device : ufeel_Fab
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-n0.mp1-V1.0.2_tinno6737m.35.n_P149

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065324741995007050B68A3DD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A484147326505075099DDA3530B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0x0CF2E6DE80FE14A9B63938977BD9DED5
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 12:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 21:17

 



All times are GMT +1. The time now is 17:28.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.70045 seconds with 9 queries

SEO by vBSEO