GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 06-27-2019, 11:13   #59191 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo HM3 Firmware Read Done By CM2


Brand : WALTON
ProdName : Primo HM3
ProdModel : Primo HM3
Device : Primo HM3
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_gr6580.we.m_P24

[Read Ok] : preloader_e150.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / e150 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2289 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__WALTON__Pri mo_HM3__Primo_HM3__6.0__alps-mp-m0.mp1-V2.34_gr6580.we.m_P24\

All Done!
  Reply With Quote
Old 06-27-2019, 11:13   #59192 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 6,962
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,078
Motorolla XT1609 FRP Reset Done With King Infinity CM2


Card found : A19EC787 , v0137
Infinity-Box Android Service Tool [AST] v1.03

Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable ADB
Waiting for NetInterface arrival ...

1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!

Waiting ...
Trying link with : 192.168.137.2
Connected to device!

Device : XT1609
Switching to FACTORY ...
Setting Unsecure mode
Waiting device ...
Connect Ok!

Trying link with : 192.168.137.2
Connected to device!

Device : XT1609
Setting ADB ...
Waiting device ...
Connect Ok!

Trying link with : 192.168.137.2
Connected to device!

Device : XT1609
Setting ADB ...

1. Disconnect cable from device, wait device reboot
2. Make "Reset FRP"
3. Disable "FACTORY MODE" after operations done!


Done!
Elapsed: 00:00:38

Operation : Reset FRP (ADB) [ v1.03 ]

Waiting for device in ADB mode ...

1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Connect Ok!

Device : harpia_vzw
Model : XT1609
FRP reset passed! Make FACTORY RESET from menu!

-- > MOTO FRP : Don't forget to DISABLE FACTORY MODE!


Done!
Elapsed: 00:00:13



  Reply With Quote
Old 06-27-2019, 11:15   #59193 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo HM3+ Firmware Read Done By CM2

Reading Flash Content now ...

Brand : WALTON
ProdName : Primo HM3+
ProdModel : Primo HM3+
Device : Primo HM3+
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_gr6580.we.m_P24

[Read Ok] : preloader_e150.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / e150 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2337 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__WALTON__Pri mo_HM3+__Primo_HM3+__6.0__alps-mp-m0.mp1-V2.34_gr6580.we.m_P24\

All done!
  Reply With Quote
Old 06-27-2019, 11:16   #59194 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo HM4 Firmware Read Done By CM2

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E58324D420103BBD4245473
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM2XN
[eMMC] : FLASH_CID : 150100464E58324D420103BBD4245473
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x605BA6A7B6A902E96CCD7181038ADF7F
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Walton
ProdName : Primo_HM4
ProdModel : Primo HM4
Device : Primo_HM4
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-n0.mp2-V1_vs6580.we.n_P22

[Read Ok] : preloader_vs6580_we_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vs6580_we_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3391 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__Walton__Pri mo_HM4__Primo_HM4__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P22\

All done!

Done!
Elapsed: 00:15:28
Reconnect Power/Cable!
  Reply With Quote
Old 06-27-2019, 11:18   #59195 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo N2 Firmware Read Done By CM2

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WALTON
ProdName : Primo_N2
ProdModel : Primo N2
Device : Primo_N2
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.W10.24.p0

[Read Ok] : preloader_v3750.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3750 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2555 MiB
Scatter saved to : \MT6580__WALTON__Primo_N2__Primo_N2__6.0__ALPS.W10 .24.p0\

All done!
  Reply With Quote
Old 06-27-2019, 11:19   #59196 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo N3 Firmware Read Done By CM2


Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100514531334D420D0A61C4151421
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D420D0A61C4151421
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xCE7B154C621CF28BABEE123056544FA6
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WALTON
ProdName : Primo N3
ProdModel : Primo N3
Device : Primo N3
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-n0.mp2-V1_vs6580.we.n_P12

[Read Ok] : preloader_vs6580_we_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vs6580_we_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2780 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__WALTON__Pri mo_N3__Primo_N3__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P12\

All Done!
  Reply With Quote
Old 06-27-2019, 11:21   #59197 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo NF2 Firmware Read Done By CM2

Reading Flash Content now ...

USBDL : Init HSUSB Ok!

xGPT : Normalize settings Ok!

Brand : WALTON
ProdName : Primo_NF2
ProdModel : Primo NF2
Device : Primo_NF2
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_vsun6580.we.m_P2

[Read Ok] : preloader_vsun6580_we_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vsun6580_we_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2695 MiB
Scatter saved to : \MT6580__WALTON__Primo_NF2__Primo_NF2__6.0__alps-mp-m0.mp1-V2.34_vsun6580.we.m_P2\

All done!
  Reply With Quote
Old 06-27-2019, 11:23   #59198 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo NF2+ Firmware Read Done By CM2

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WALTON
ProdName : Primo_NF2+
ProdModel : Primo NF2+
Device : Primo_NF2+
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_vsun6580.we.m_P4

[Read Ok] : preloader_vsun6580_we_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vsun6580_we_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2756 MiB
Scatter saved to : \MT6580__WALTON__Primo_NF2+__Primo_NF2+__6.0__alps-mp-m0.mp1-V2.34_vsun6580.we.m_P4\

All done!

done
  Reply With Quote
Old 06-27-2019, 11:25   #59199 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
WALTON Primo NH Lite Firmware Read Done By CM2

Reading Flash Content now ...

Brand : WALTON
ProdName : Primo_NH_Lite
ProdModel : Primo_NH_Lite
Device : Primo_NH_Lite
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_vsun6580.we.m_P2

[Read Ok] : preloader_vsun6580_we_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vsun6580_we_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2695 MiB
Scatter saved to : \MT6580__WALTON__Primo_NH_Lite__Primo_NH_Lite__6.0 __alps-mp-m0.mp1-V2.34_vsun6580.we.m_P2\

All done!
  Reply With Quote
Old 06-27-2019, 11:26   #59200 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo NH2 Lite Firmware Read Done By CM2

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847346192A2118AEC80A367
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a4G8
[eMMC] : FLASH_CID : 90014A483847346192A2118AEC80A367
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xD3510ECED168D98A3B39C73E7AB443E0
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WALTON
ProdName : Primo NH2 Lite
ProdModel : Primo NH2 Lite
Device : Primo NH2 Lite
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_vsun6580.we.m_P3

[Read Ok] : preloader_vsun6580_we_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vsun6580_we_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2695 MiB
Scatter saved to : C:\Users\nobichannmaruf\Desktop\MT6580__WALTON__Pr imo_NH2_Lite__Primo_NH2_Lite__6.0__alps-mp-m0.mp1-V2.34_vsun6580.we.m_P3\

All done!
  Reply With Quote
Old 06-27-2019, 11:29   #59201 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo NH3 Firmware Read Done By CM2

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A484147346132A50BA5292D24E9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GA
[eMMC] : FLASH_CID : 90014A484147346132A50BA5292D24E9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0xD3510ECE83C9EC4A906B089623A552FB
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WALTON
ProdName : Walton_Primo_NH3
ProdModel : Primo NH3
Device : Primo NH3
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-n0.mp2-V1_vs6580.we.n_P6

[Read Ok] : preloader_vs6580_we_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vs6580_we_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3159 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__WALTON__Pri mo_NH3__Primo_NH3__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P6\

All done!
  Reply With Quote
Old 06-27-2019, 11:32   #59202 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo NH3 Lite Firmware Read Done By CM2

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847346192A21700F02F344D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a4G8
[eMMC] : FLASH_CID : 90014A483847346192A21700F02F344D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x845EB1777159EF45E94BCA001A455DE1
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WALTON
ProdName : Walton_Primo_NH3_Lite
ProdModel : Primo NH3 Lite
Device : Primo NH3 Lite
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-n0.mp2-V1_vs6580.we.n_P6

[Read Ok] : preloader_vs6580_we_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vs6580_we_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3092 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__WALTON__Pri mo_NH3_Lite__Primo_NH3_Lite__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P6\

All done!
  Reply With Quote
Old 06-27-2019, 11:36   #59203 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 2,388
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 353
Walton Primo NX2 Firmware Read Done By CM2

Reading Flash Content now ...

Brand : Walton
ProdName : Primo NX2
ProdModel : Primo NX2
Device : Primo NX2
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_k5_walton.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / k5_walton / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1270 MiB
Scatter saved to :\MT6582__Walton__Primo_NX2__Primo_NX2__4.4.2__ALP S.KK1.MP1.V2.10\

All done!
  Reply With Quote
Old 06-27-2019, 11:43   #59204 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 6,962
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,078
Oppo A57 QLM FRP Reset Done With King Infinit CM2

Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 26719B81
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 06FE9462CD5946413E13FDE22D74FCCC
ID_BLOCK_L : 285BE54449D8028306F1DA13119C8AB1
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:39

Reconnect Power/Cable!
  Reply With Quote
Old 06-27-2019, 12:23   #59205 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 6,962
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,078
Wiko Laney Black MT6572 Pattren Reset Done With King Infinity CM2


Card found : S/N : A19EC787 , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040500A292E5121D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040500A292E5121D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xD9C8F3956E01D4A5838D0CF4B7CF2429
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:30
Reconnect Power/Cable!


  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 16:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 08:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 11:15.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.82191 seconds with 9 queries

SEO by vBSEO