GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 12-09-2019, 07:55   #61411 (permalink)
No Life Poster
 
jamohaki's Avatar
 
Join Date: Sep 2004
Age: 48
Posts: 1,827
Member: 83397
Status: Offline
Thanks Meter: 136

ITEL S15 FRP DONE!

Operation : Format FS / Reset Settings [ v2.03 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel W5503
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:47

Last edited by jamohaki; 12-09-2019 at 08:00.
  Reply With Quote
The Following User Says Thank You to jamohaki For This Useful Post:
Old 12-09-2019, 11:20   #61412 (permalink)
Freak Poster
 
Join Date: Nov 2011
Posts: 338
Member: 1689739
Status: Offline
Sonork: 100.1608775
Thanks Meter: 108
qmobile x33 pattern & frp remove done

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 54 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000012AAF7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:34

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to badman5 For This Useful Post:
Old 12-09-2019, 12:53   #61413 (permalink)
Freak Poster
 
Join Date: Feb 2019
Posts: 195
Member: 2897012
Status: Offline
Sonork: MTK81
Thanks Meter: 161
Umidigi london frp lock reset done by cm2

Code:
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.06

Load IDBase v124106 Ok!

Update configuration ... 
Update Ok!
Load IDBase v124106 Ok!

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM146)
MODE : PRELOADER PORT
PORT : 146
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 4E0301886472614309E64320C5A32FC3
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 8801034E436172642043E609C32FA3C5
        EMMC: VEN : FORESEE | OEM : 301 | DEV : NCard
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x1CE100000 [ 7,22 GB ]

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x40000000 [ 1,00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 51C7DF6C86FB6CAF407A730AC30B644

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : UMIDIGI.London.V3.03_20170209
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-01-05
Build Time     : 1486635490
Product Model  : London
Product Brand  : UMIDIGI
Product Name   : London
Product Device : London
Product Manfct : UMIDIGI
Board Platform : mt6580
Product Info   : w370

USERDATA : PLAIN ( NOT encrypted )


Backup sensetive data [ 10 ]
Backup path : Backup\MT6580__51C7DF6C086FB6CAF407A730AC30B644\
[3] Read : NVRAM
[14] Read : NVDATA
[2] Read : PROINFO
[7] Read : LK
[4] Read : PROTECT1
[5] Read : PROTECT2
[0] Read : PRELOADER
Backup done!


Done!
Elapsed: 00:00:47
Code:
Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM146)
MODE : PRELOADER PORT
PORT : 146
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 4E0301886472614309E64320C5A32FC3
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 8801034E436172642043E609C32FA3C5
        EMMC: VEN : FORESEE | OEM : 301 | DEV : NCard
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x1CE100000 [ 7,22 GB ]

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x40000000 [ 1,00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 51C7DF6C86FB6CAF407A730AC30B644

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Manikanika81 For This Useful Post:
Old 12-09-2019, 13:07   #61414 (permalink)
No Life Poster
 
pintu_das's Avatar
 
Join Date: Jan 2015
Location: Narsingdi, Dhaka, Bangladesh
Age: 23
Posts: 1,818
Member: 2325851
Status: Offline
Sonork: 100.1680491
Thanks Meter: 1,815
Donate money to this user
Operation: Upload
File: C:\Users\pintu\Desktop\MT6739__Fortune_Ship__P7_Pl us__8.1.0__GP_MAXIMUS_BD_P7_Plus_V07_20190408__O11 019__k39tv1_bsp_1g.rar
Authentication...
Initialization...
12/9/2019: 17:18:03: Upload file 639.69 Mb
12/9/2019: 17:18:08: Uploading 639.69 Mb...
12/9/2019: 18:03:28: Finished
12/9/2019: 18:04:28: Operation failed: Read timed out.


file upload done maxumus p7 plus
file read with InfinityBox CM2MT2
  Reply With Quote
Old 12-09-2019, 14:51   #61415 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 6,583
Member: 314003
Status: Offline
Thanks Meter: 2,434
OPPO A37f Format

Code:
Brand     : OPPO
ProdName  : A37f
ProdModel : A37f
Device    : A37f
AndroidVer: 5.1.1
SWVersion : A37fEX_11.A.38_INT_038_201907110016
Manufact. : OPPO
SysPatch  : LMY47V
DevComTime: 7/10/19 7:29:34 PM
QLMxCPU   : MSM8916

USERData : NORMAL
GCSec    : EMPTY

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 2340A012
ID_BLOCK_L : 97510BF362C8F5F0AF844C519EE56D5D
ID_BLOCK_L : 1B6AD47778EB53D0F5C0954240AFB982
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Format USER ... 
Format CACHE ... 
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:31

Reconnect Power/Cable!
  Reply With Quote
Old 12-09-2019, 19:00   #61416 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 6,583
Member: 314003
Status: Offline
Thanks Meter: 2,434
Moto E (4) Frp

Code:
Brand     : motorola
ProdName  : woods_retail
ProdModel : Moto E (4)
Device    : woods
AndroidVer: 7.1.1
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P42

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A0190613447417956A532DB4F3DE1
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GA
[eMMC] : FLASH_CID : 90014A484147346132A55679E13D54DB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xD5229C25E4CC36865CD55C2B31BC102B
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!
  Reply With Quote
Old 12-09-2019, 19:04   #61417 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 6,583
Member: 314003
Status: Offline
Thanks Meter: 2,434
Vivo PD1732F_EX Flash

Code:
Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2019-11-05
Build Time     : 1574044592
Product Model  : vivo 1808
Product Brand  : vivo
Product Name   : PD1732F_EX
Product Device : PD1732F_EX
Product Manfct : vivo
Product Info   : k62v1_64_bsp
Product Model  : PD1732F_EX
Product Board  : k62v1_64_bsp
Board Platform : mt6765

USERDATA : ENCRYPTED 


Done!
Elapsed: 00:00:31


Preloader [HW DEV] Info : 
 EMI : DEV : MT6765
 EMI : SRC : preloader_k62v1_64_bsp.bin
 EMI : CNT : 000A
 EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
 EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
 EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
 EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
 EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
 EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
 EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
 EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
 EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
 EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG   | DEV : GE6BMB : RAM : [ 3.00 GB ]

Operation : Write Flash [ v2.06 ]

Repartition   : Enabled
Flash Verify  : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled

Files :23
[FL] : Set : preloader_k62v1_64_bsp.bin
[FL] : Set : recovery-verified.img
[FL] : Set : survival-verified.img
[FL] : Set : oem.img
[FL] : Set : efuse.img
[FL] : Set : md1img-verified.img
[FL] : Set : md1dsp-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot-verified.img
[FL] : Set : logo-verified.bin
[FL] : Set : odmdtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x184386778 [ 6.07 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM18)
MODE : BOOTROM
PORT : 18
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+ARB
BROM : BOOTROM
MODE : Vivo : Y83 | Manual : Disabled
BROM : ARB : ACTIVE : LOG : F0: 102B 0000  F3: 0000 0000 [0200]  V0: 0000 0000 [0001]
BROM : SOCID : 71258046AB3E899A72FE46DD18E07F79B2B8441D1C04F07444462AE5034CFC1A
BROM : SLA
BROM : SLA Passed!
BROM : SLA CHLNG not used
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA_VIP.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_k62v1_64_bsp.bin
     EMI : CNT : 000A
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]
     EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG   | DEV : DV6DMB : RAM : [ 4.00 GB ]
     EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
     EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
     EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
     EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG   | DEV : GE6BMB : RAM : [ 3.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 90014A68423861503E030D1138D4A563
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 895E6095AC25F4E631AEAB9B7CEFBF7A

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
OK
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase 
Erase : 0x0000000000000000 : 0x0000000005688000
Erase : 0x0000000007688000 : 0x0000000004000000
Erase : 0x000000000C088000 : 0x0000000014000000
Erase : 0x0000000021800000 : 0x0000000000800000
Erase : 0x0000000025000000 : 0x0000000000200000
Erase : 0x0000000025500000 : 0x0000000009980000
Erase : 0x0000000032E80000 : 0x0000000257180000

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : RECOVERY
Write : SURVIVAL
Write : CUST
Write : EFUSE
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : ODMDTBO
Write : TEE1
Write : TEE2
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

SEC_DL : False (RAPHAEL)
OK
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:04:58

Reconnect Power/Cable!
  Reply With Quote
Old 12-09-2019, 19:39   #61418 (permalink)
No Life Poster
 
gile@gile's Avatar
 
Join Date: Dec 2010
Location: Balkan
Age: 46
Posts: 1,797
Member: 1473716
Status: Offline
Thanks Meter: 815
WIKO Y60 Model W-K510 FRP Reset done

WIKO Y60 Model W-K510 FRP Reset done

Card found : 07EDXXXX , v0138
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.06

Load IDBase v124106 Ok!

Update configuration ...
Update Ok!
Load IDBase v124106 Ok!

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM37)
MODE : PRELOADER PORT
PORT : 37
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
MODE : Wiko : Wiko Y60-K510W | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC_1836_K510BG_9.0_WIK_FR_31.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]

EMMC: 150100464536324D4203574768CA56A3
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6AC10384E8488E81A51F8EE39CB6B940

DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.181008.011
Display ID : PPR1.181008.011 release-keys
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-06-05
Build Time : 1559647253
Product Model : W-K510-SUN
Product Brand : WIKO
Product Name : W-K510-SUN
Product Device : W-K510
Product Manfct : WIKO
Product Info : k510bg
Product Board : k510bg
Board Platform : mt6739
Product Model : W-K510-SUN
Product Brand : WIKO
Product Name : W-K510-SUN
Product Device : W-K510
Product Manfct : WIKO
Product Model : W-K510

USERDATA : ENCRYPTED


Done!
Elapsed: 00:00:18
-------------------------
-------------------------

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM37)
MODE : PRELOADER PORT
PORT : 37
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
MODE : Wiko : Wiko Y60-K510W | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC_1836_K510BG_9.0_WIK_FR_31.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]

EMMC: 150100464536324D4203574768CA56A3
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6AC10384E8488E81A51F8EE39CB6B940

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!
-------------------------
-------------------------
  Reply With Quote
The Following User Says Thank You to [email protected] For This Useful Post:
Old 12-09-2019, 19:40   #61419 (permalink)
No Life Poster
 
gile@gile's Avatar
 
Join Date: Dec 2010
Location: Balkan
Age: 46
Posts: 1,797
Member: 1473716
Status: Offline
Thanks Meter: 815
WIKO Y60 Model W-K510 FRP Reset done

WIKO Y60 Model W-K510 FRP Reset done

Card found : 07EDXXXX , v0138
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.06

Load IDBase v124106 Ok!

Update configuration ...
Update Ok!
Load IDBase v124106 Ok!

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM37)
MODE : PRELOADER PORT
PORT : 37
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
MODE : Wiko : Wiko Y60-K510W | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC_1836_K510BG_9.0_WIK_FR_31.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]

EMMC: 150100464536324D4203574768CA56A3
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6AC10384E8488E81A51F8EE39CB6B940

DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.181008.011
Display ID : PPR1.181008.011 release-keys
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-06-05
Build Time : 1559647253
Product Model : W-K510-SUN
Product Brand : WIKO
Product Name : W-K510-SUN
Product Device : W-K510
Product Manfct : WIKO
Product Info : k510bg
Product Board : k510bg
Board Platform : mt6739
Product Model : W-K510-SUN
Product Brand : WIKO
Product Name : W-K510-SUN
Product Device : W-K510
Product Manfct : WIKO
Product Model : W-K510

USERDATA : ENCRYPTED


Done!
Elapsed: 00:00:18
-------------------------
-------------------------

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM37)
MODE : PRELOADER PORT
PORT : 37
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
MODE : Wiko : Wiko Y60-K510W | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC_1836_K510BG_9.0_WIK_FR_31.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]

EMMC: 150100464536324D4203574768CA56A3
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6AC10384E8488E81A51F8EE39CB6B940

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!
-------------------------
-------------------------
  Reply With Quote
Old 12-10-2019, 06:19   #61420 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,122
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 392
Maximus P7 Plus FRP Remove Done By CM2 MT2

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1816 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: 700100454838454538012248FBDF26B5
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EH8EE8
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x1C8000000 [ 7.13 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : F478A36FC024E2FC526FCD7963F500

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:12

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to nobichanmaruf For This Useful Post:
Old 12-10-2019, 10:25   #61421 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,205
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,131
Qmobile i9i Pro MT6580 FRP Reset Done With King Infiity CM2


Card found : S/N : A19EC787 , v0138
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505072AC8E650C27B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505072AC8E650C27B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xD9C8F395DBBB7F5B9CD5C12AF5BFB795
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:42
Reconnect Power/Cable!


  Reply With Quote
The Following User Says Thank You to azhergoga007 For This Useful Post:
Old 12-10-2019, 10:49   #61422 (permalink)
No Life Poster
 
Join Date: Oct 2017
Posts: 1,021
Member: 2765424
Status: Offline
Thanks Meter: 725
CHINA TAB C-723ULTRA flash file read done

CHINA TAB C-723ULTRA flash file read done

Code:
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 101 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x000000003E9F7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:25

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 101 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 101 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 101 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : C-723ULTRA
Model Brand : C-723ULTRA
Model Device: C-723ULTRA
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : s706a_cuser_20180605
Model Ext   : C-723ULTRA

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.32.2_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2569 MiB
Saved to : E:\CHINA TAB\SP7731CEB_C-723ULTRA_6.0_s706a_cuser_20180605_C-723ULTRA\
Done!

Elapsed: 00:11:37

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to taimur-ahmad For This Useful Post:
Old 12-10-2019, 11:31   #61423 (permalink)
No Life Poster
 
Join Date: Oct 2017
Posts: 1,021
Member: 2765424
Status: Offline
Thanks Meter: 725
Q I8I 2019 flash file read and format done

Q I8I 2019 flash file read and


Code:
Operation : Format FS / Reset Settings [ v2.02 ]
Mode : Reset FRP

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:33

Operation : Identify [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : OPM2.171019.012
Display ID     : OPM2.171019.012 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2019-02-05
Build Time     : 1550555934
Product Model  : QMobile i8i 2019
Product Info   : i8i 2019
Product Brand  : QMobile
Product Name   : i8i_2019
Product Device : i8i_2019
Product Model  : i8i 2019
Product Model  : I8I2019
Product Manfct : QMobile
Product Board  : i8i-2019
Board Platform : sp7731e

Update DataBase ... 


Platform Version: MOCORTM_17C_W18.21.1_P2_Debug
Project Version:   pike2_pub
BASE  Version:    FM_BASE_17C_W18.21.1_P2
HW Version:        sc7731e_modem
CMP_Time : 06-07-2018 16:54:31

MODEM TAG : MOCORTM_17C_W18.21.1_P2_Debug_FM_BASE_17C_W18.21.1_P2_sc7731e_modem_pike2_pub

UserData : STATE : PLAIN


Done!
Elapsed: 00:01:52
  Reply With Quote
The Following User Says Thank You to taimur-ahmad For This Useful Post:
Old 12-10-2019, 11:34   #61424 (permalink)
No Life Poster
 
Join Date: Oct 2017
Posts: 1,021
Member: 2765424
Status: Offline
Thanks Meter: 725
Q Mobile Fire format and flash file read done

Q Mobile Fire format and flash file read done


Code:
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.02

Load IDBase v10107 Ok!


Operation : Format FS / Reset Settings [ v2.02 ]
Mode : Default [ Reset Settings + FRP ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:34

Operation : Identify [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : OPM2.171019.012
Display ID     : QMobileFire_MP_22_09
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1537586245
Product Model  : Fire
Product Brand  : QMobile
Product Name   : Fire
Product Device : Fire
Product Manfct : QMobile
Product Info   : Fire
Product Board  : sp7731e_1h10
Board Platform : sp7731e

Update DataBase ... 


Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version:   pike2_pub
BASE  Version:    FM_BASE_17C_W18.23.4_P2
HW Version:        sc7731e_modem

MODEM TAG : MOCORTM_17C_W18.23.4_P2_Debug_FM_BASE_17C_W18.23.4_P2_sc7731e_modem_pike2_pub

UserData : STATE : PLAIN


Done!
Elapsed: 00:02:10
  Reply With Quote
The Following User Says Thank You to taimur-ahmad For This Useful Post:
Old 12-10-2019, 11:38   #61425 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,205
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,131
Qmobile S3 MT6580 FRP Reset Done With King Infinity CM2


Card found : S/N : A19EC787 , v0138
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48414732650507747B9592A21D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A48414732650507747B9592A21D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0xD9C8F395F13B44C4C3175B266D4E030A
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:50
Reconnect Power/Cable!


  Reply With Quote
The Following User Says Thank You to azhergoga007 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 12:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 21:17

 



All times are GMT +1. The time now is 00:40.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.81015 seconds with 9 queries

SEO by vBSEO