GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box


Reply
 
LinkBack Thread Tools Display Modes
Old 12-11-2019, 11:48   #61441 (permalink)
Freak Poster
 
Join Date: Feb 2018
Location: bahawalpur
Posts: 152
Member: 2809413
Status: Offline
Thanks Meter: 18
vodafone vfd500 mt6735 firmware read ok


Homevodafone firmwarevodafone vfd500 mt6735




Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Vodafone
Device Model : VFD500
Device CPU : MT6735
Device IntName : Smart_turbo7
Device Version : 6.0
Device Compile : 6/6/2016 3:05:55 AM
Device Project : alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.vf.m_P89
Device ExtInfo : VFD 500


Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Vodafone
ProdName : Smart_turbo7
ProdModel : VFD 500
Device : VFD500
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.vf.m_P89

[Read Ok] : preloader_frodo_35u.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : simlock.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / frodo_35u / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1981 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Read_out\MT6735__Vodafone__V FD_500__VFD500__6.0__alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.vf.m_P89\

All done!

Done!
Elapsed: 00:07:45
Reconnect Power/Cable!



password file removed

Last edited by YellowBoss; 12-11-2019 at 11:50. Reason: password file removed
  Reply With Quote
Old 12-11-2019, 11:52   #61442 (permalink)
Freak Poster
 
Join Date: Feb 2018
Location: bahawalpur
Posts: 152
Member: 2809413
Status: Offline
Thanks Meter: 18
g tide v5 pac file read ok

g tide v5 pac file




V125_GAL_072_v125_gal_072_4.4.2_KOT49H_14B_test-keys_G-TiDE_V5



Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : v125_gal_072
Model Brand : G-TiDE V5
Model Device: v125_gal_072
AndrVersion : 4.4.2
BaseBand CPU: V125_GAL_072
Project Ver : KOT49H 14B_test-keys
Model Ext : G-TiDE V5

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 880 MiB
Saved to : C:\Users\BASIT NAZZEER\Desktop\V125_GAL_072_v125_gal_072_4.4.2_KO T49H_14B_test-keys_G-TiDE_V5\
Done!

Elapsed: 00:11:03

Reconnect Power/Cable!


Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : V125_GAL_072_v125_gal_072_4.4.2_KOT49H_14B_test-keys_G-TiDE_V5
Step #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step #2 : Select logic
Select Logic : SC7731

Step #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:01:01

Saved to : V125_GAL_072_v125_gal_072_4.4.2_KOT49H_14B_test-keys_G-TiDE_V5.pac
Done!


password file removed

Last edited by YellowBoss; 12-11-2019 at 11:53. Reason: password file removed
  Reply With Quote
Old 12-11-2019, 11:58   #61443 (permalink)
Freak Poster
 
Join Date: Feb 2018
Location: bahawalpur
Posts: 152
Member: 2809413
Status: Offline
Thanks Meter: 18
Qmobile W50 Factory firmware PAC read ok

Qmobile W50 Factory firmware PAC File





SP7731GEA_HD_scx35_sp7731gea_hd_5.1_QMobileW50_MP_ 10_30_QMobile_W50.pac








Card found: S/N : , v0138
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Infinity SC Firmware Detected
FW Size : 2124 MiB
Load Ok!

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : QMobile
Device Model : scx35_sp7731gea_hd
Device CPU : sp7731gea_hd
Device IntName : sp7731geahdplusoversea
Device Version : 5.1
Device Compile : 11/2/2015 2:55:57 AM
Device Project : QMobileW50_MP_10_30
Device ExtInfo : QMobile W50


Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : SP7731GEA_HD_scx35_sp7731gea_hd_5.1_QMobileW50_MP_ 10_30_QMobile_W50
Step #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step #2 : Select logic
Select Logic : SC7731

Step #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : fblogo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:01:09

Saved to : SP7731GEA_HD_scx35_sp7731gea_hd_5.1_QMobileW50_MP_ 10_30_QMobile_W50.pac
Done!


password protected file removed

Last edited by YellowBoss; 12-11-2019 at 12:07.
  Reply With Quote
Old 12-11-2019, 12:00   #61444 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,961
Member: 2644066
Status: Offline
Thanks Meter: 929
Huawei chm u01 hang on logo done by cm2


Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6582 , Project : mbk82_wet_kk , Storage : EMMC
Files found : 11 , Set to Flash : 10
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Huawei
Device Model : CHM-U01
Device CPU : MT6582
Device IntName : CHM-U01
Device Version : 4.4.2
Device Compile : 8/27/2015 3:31:46 AM
Device Project : ALPS.KK1.MP1.V2.11
Device ExtInfo : CHM-U01
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040503A2EA88A15B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040503A2EA88A15B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x0386520DD949DCE729134AB0DAA7E23B
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6582 , Project : mbk82_wet_kk , Storage : EMMC
Setting : Flash Pre-Erase : Off ( Write Flash Only )
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : 3964 mV
BL : BatteryLevel Ok

SecCfg Passed , 1799
BMT remark not need. Will skip

Preloader Download skipped by user request!
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:03:26

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:58

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:33
Reconnect Power/Cable!
  Reply With Quote
Old 12-11-2019, 12:02   #61445 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,961
Member: 2644066
Status: Offline
Thanks Meter: 929
Qmobile s9 reset frp done by cm2


Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A484147326505070012130DB3D3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A484147326505070012130DB3D3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0xD9C8F395E2BF760203164671278F8048
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:23
Reconnect Power/Cable!
  Reply With Quote
Old 12-11-2019, 12:03   #61446 (permalink)
Freak Poster
 
Join Date: Feb 2018
Location: bahawalpur
Posts: 152
Member: 2809413
Status: Offline
Thanks Meter: 18
Vsun Mars Touch Flash read ok

Vsun Mars Touch Flash
Device Brand : Vsun
Device Model : MARS_TOUCH
Device CPU : MT6737M
Device IntName : MARS_TOUCH
Device Version : 7.0
Device Compile : 10/25/2017 8:45:20 AM
Device Project : alps-mp-n0.mp1-V1.0.2_vs6737m.35.n_P50
Device ExtInfo : MARS TOUCH



Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 16 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333145E4540D4241820B9A
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D420D54E49A0B6441
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xB6FEA66F4F6163018C850A6AA90330B7
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!





Brand : Vsun
ProdName : MARS_TOUCH
ProdModel : MARS TOUCH
Device : MARS_TOUCH
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-n0.mp1-V1.0.2_vs6737m.35.n_P50

[Read Ok] : preloader_vs6737m_35_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / vs6737m_35_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2529 MiB
Scatter saved to : C:\Users\BASIT NAZZEER\Desktop\MT6737M__Vsun__MARS_TOUCH__MARS_TO UCH__7.0__alps-mp-n0.mp1-V1.0.2_vs6737m.35.n_P50\

All done!

Done!
Elapsed: 00:08:44
Reconnect Power/Cable!


password protected file removed

Last edited by YellowBoss; 12-11-2019 at 12:06. Reason: password protected file removed
  Reply With Quote
Old 12-11-2019, 12:04   #61447 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 6,661
Member: 314003
Status: Offline
Thanks Meter: 2,453
OPPO A37f Pattern Read

Code:
Brand     : OPPO
ProdName  : A37f
ProdModel : A37f
Device    : A37f
AndroidVer: 5.1.1
SWVersion : A37fEX_11.A.38_INT_038_201907110016
Manufact. : OPPO
SysPatch  : LMY47V
DevComTime: 2019-07-10 7:29:34 PM
QLMxCPU   : MSM8916

USERData : NORMAL
GCSec    : EMPTY

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 20B71CD9
ID_BLOCK_L : EE164C8A25B1BEA996CB050AD5AC2424
ID_BLOCK_L : 92E1AFFEF362CC597CBB1CD5DFD6C00B
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Read Ok! Trying decrypt ... 
PatternLock sequence : 14753

Done!
Elapsed: 00:00:31

Reconnect Power/Cable!
  Reply With Quote
Old 12-11-2019, 12:05   #61448 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,961
Member: 2644066
Status: Offline
Thanks Meter: 929
G five big bird reset password done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR


SPRD mode : SC6531 : REV : E000 : NOR

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1F8 55BA85F05_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!
  Reply With Quote
Old 12-11-2019, 12:06   #61449 (permalink)
Freak Poster
 
Join Date: Feb 2018
Location: bahawalpur
Posts: 152
Member: 2809413
Status: Offline
Thanks Meter: 18
calme c86 flash read ok

calme c86 flash file




SC6531_SPI_WINBOND_W25Q_4MiB







Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.05

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Read UserCode [ v1.05 ]

MODE : From Device
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Reading data ...
Sorting data ...
STATE : NOT ACTIVE : CODE : 0000


Done!
Elapsed: 00:00:31

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]






Operation : Read Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

CALME_C86_V06_26092019_17:06:52
Project Version: SC6531EFM_BAR
MMI Version: SC6531EFM_BAR
BASE Version: BASE_SVN
HW Version(Auto): SC6531EFM_BAR
buildtime:09-26-2019 17:06:52
LOG Version: V1.0.1
Saved to : C:\Users\BASIT NAZZEER\Desktop\CALME_C86_V06_26092019_17:06:52.bi n

Done!
Elapsed: 00:01:15

Reconnect Power/Cable!


password protected file removed

Last edited by YellowBoss; 12-11-2019 at 12:08. Reason: password protected file removed
  Reply With Quote
Old 12-11-2019, 12:18   #61450 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,961
Member: 2644066
Status: Offline
Thanks Meter: 929
Vgo tel ocean 6 hang on logo done by cm2


Card found: S/N : 73CA70CC , v0137
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Infinity SC Firmware Detected
FW Size : 2582 MiB
Load Ok!

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : VGOTEL
Device Model : OCEAN_6
Device CPU : VGOTEL
Device IntName : OCEAN 6
Device Version : 6.0
Device Compile : 1/4/2017 1:48:28 AM
Device Project : VGOTEL_OCEAN_6_V08
Device ExtInfo : OCEAN 6


Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x19 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!

Write FSImage : prodnv.img
Write Data ...
Write Data Ok!

Write CodeData : sc7731C_CP0_modem.bin
Write Data ...
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
Write Data ...
Write Data Ok!

Write CodeData : logo_480x854.bin
Write Data ...
Write Data Ok!

Write CodeData : fblogo_480x854.bin
Write Data ...
Write Data Ok!

Write CodeData : boot.img
Write Data ...
Write Data Ok!

Write FSImage : system.img
Write Data ...
Write Data Ok!

Erase Block : PERSIST
Erase block ...
Block erase Ok!

Write CodeData : sysinfo.img
Write Data ...
Write Data Ok!

Write FSImage : cache.img
Write Data ...
Write Data Ok!

Write CodeData : recovery.img
Write Data ...
Write Data Ok!

Erase Block : MISC
Erase block ...
Block erase Ok!

Write FSImage : userdata.img
Write Data ...
Write Data Ok!


Elapsed: 00:06:58

Reconnect Power/Cable!

  Reply With Quote
Old 12-11-2019, 12:27   #61451 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 6,661
Member: 314003
Status: Offline
Thanks Meter: 2,453
QMobile I3 Flash

Code:
Brand     : QMobile I3
ProdName  : QMobile I3
ProdModel : QMobile I3
Device    : QMobile I3
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : QMobileI3_MP_07_13

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6572 , Project : s857_72_kk , Storage : EMMC
Files found : 11 , Set to Flash : 10
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48344732611101B1A03A7252FD
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A48344732611101B1A03A7252FD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xD5229C254AB2391CC6D8E9DF8CD9DD54
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : s857_72_kk , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Disabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 4107 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x000000009E840000
Flash Pre-Erase Done, time used : 00:00:10

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_s857_72_kk.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0013
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:03:31


Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:00
Reconnect Power/Cable!
  Reply With Quote
Old 12-11-2019, 13:59   #61452 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 6,661
Member: 314003
Status: Offline
Thanks Meter: 2,453
QMobile X25 Flash

Code:
Brand     : QMobile
ProdName  : X25
ProdModel : QMobile X25
Device    : X25
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6572 , Project : s4011 , Storage : EMMC
Files found : 11 , Set to Flash : 10
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 61 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040509A2CD32C12F
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040509A2CD32C12F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xD5229C25ECB5995B476012DF4F5A4329
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : s4011 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Disabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : 3710 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x00000000E5E00000
Flash Pre-Erase Done, time used : 00:00:04

SecCfg Passed , 1799
BMT remark not need. Will skip

Preloader Download skipped by user request! 
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:02:36


Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:02:59
Reconnect Power/Cable!
  Reply With Quote
Old 12-11-2019, 14:16   #61453 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,265
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,150
Qmobile I6 Metal 1 MT6580 FRP Reset Done With King Infinity CM2



Card found : S/N : A19EC787 , v0138
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473165050730C1C400B391
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A4838473165050730C1C400B391
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xD9C8F395BB3C8068F12F79F86906B15B
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!


  Reply With Quote
Old 12-11-2019, 16:06   #61454 (permalink)
Freak Poster
 
Join Date: Sep 2015
Location: SINDH, PAKISTAN.
Posts: 380
Member: 2452939
Status: Offline
Thanks Meter: 128
QMobile i10 2019 done with cm2sp2

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : PPR1.180610.011
Display ID : PPR1.180610.011 release-keys
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 1558944550
Product Info : i10_2019
Product Model : i10 2019
Product Brand : QSmart
Product Name : i10_2019
Product Device : i10_2019
Product Manfct : QMobile
Product Model : i10 2019
Product Model : i102019
Product Board : QSmart
Board Platform : sp7731e

Update DataBase ...


Platform Version: MOCORTM_17C_W18.41.3_P8_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.41.3_P8
HW Version: sc7731e_modem
CMP_Time : 12-25-2018 17:35:01

MODEM TAG : MOCORTM_17C_W18.41.3_P8_Debug_FM_BASE_17C_W18.41.3 _P8_sc7731e_modem_pike2_pub

UserData : STATE : PLAIN


Done!
Elapsed: 00:01:55

Operation : Read FW [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : PPR1.180610.011
Display ID : PPR1.180610.011 release-keys
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 1558944550
Product Info : i10_2019
Product Model : i10 2019
Product Brand : QSmart
Product Name : i10_2019
Product Device : i10_2019
Product Manfct : QMobile
Product Model : i10 2019
Product Model : i102019
Product Board : QSmart
Board Platform : sp7731e

VlnrLevel : 0x00

SP7731E__QMobile__i102019__9__PPR1.180610.011__i10 _2019

Read : prodnv.img
ExtSparse : Compression ratio : 10%
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : deltanv_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : dtb.img
Read : dtbo.img
Read : system.img
ExtSparse : Compression ratio : 93%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 49%
Read : otp_product.img
ExtSparse : Compression ratio : 2%
Read : vbmeta.img
Make : userdata.img
Read : u-boot-spl.bin

Firmware size : 0x7211502C ( 1.78 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!


Done!
Elapsed: 00:40:06
  Reply With Quote
The Following User Says Thank You to GSM SINDH For This Useful Post:
Old 12-11-2019, 20:03   #61455 (permalink)
No Life Poster
 
Yusuf Lawal's Avatar
 
Join Date: Oct 2011
Location: Nigeria
Posts: 5,497
Member: 1677653
Status: Offline
Thanks Meter: 2,033
Donate money to this user
Mytron pad 60 frp reset done

Card found : A6936825 , v0138
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.06

Load IDBase v124106 Ok!

Update configuration ...
Socket Error # 11001
Host not found.
Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D32364502C70342AFA5BFD2
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464536324D4203C702D2BFA5AF
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 511D87305705620A49ED1CFEB9D69D27

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : O11019
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-04-05
Build Time : 1557797918
Product Model : Pad_60
Product Brand : mytron
Product Name : Pad_60
Product Device : Pad_60
Product Manfct : mytron
Product Info : k80_bsp
Product Board : k80_bsp
Board Platform : mt6580

USERDATA : ENCRYPTED

IMEI[0] : XXXXXXXXXXXXXXX
IMEI[1] : XXXXXXXXXXXXXXX
NVRAM check : Passed!

Done!
Elapsed: 00:00:20

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D32364502C70342AFA5BFD2
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464536324D4203C702D2BFA5AF
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 511D87305705620A49ED1CFEB9D69D27

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 16:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 08:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 23:19.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.87574 seconds with 9 queries

SEO by vBSEO