GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box


Reply
 
LinkBack Thread Tools Display Modes
Old 01-18-2020, 04:09   #61966 (permalink)
No Life Poster
 
Join Date: Aug 2014
Posts: 644
Member: 2233266
Status: Offline
Thanks Meter: 240
v75 frp done


  Reply With Quote
Old 01-18-2020, 05:58   #61967 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: Liton,KALAROA,SATKHIRA
Posts: 2,291
Member: 2556542
Status: Offline
Thanks Meter: 1,025
samsung j8 copy read flash file done

Code:
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 58 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E355530304D02ADC282308081
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 1501004E355530304D02ADC282308081
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xB22F14B45BA1EAD287A71C74786701C9
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : Samsung
ProdName  : SM-J800FN
ProdModel : SM-J800FN
Device    : j7209
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : J7209_6.0.1_V1.8 20161121-1613

[Read Ok] : preloader_j7209.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / j7209 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 590 MiB
Scatter saved to : C:\Users\Liton software\Desktop\MT6572__Samsung__SM-J800FN__j7209__4.2.2__J7209_6.0.1_V1.8_20161121-1613\

All done!

Done!
Elapsed: 00:03:53
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to kothamamun For This Useful Post:
Old 01-18-2020, 06:42   #61968 (permalink)
No Life Poster
 
>>Gsmmilon>>'s Avatar
 
Join Date: Mar 2014
Age: 26
Posts: 1,816
Member: 2142580
Status: Offline
Sonork: 100.1645446
Thanks Meter: 1,045
Donate money to this user
Nokia 1Plus TA-1130 FRP Remove Done

Nokia 1Plus TA-1130 FRP Remove Done

  Reply With Quote
The Following User Says Thank You to >>Gsmmilon>> For This Useful Post:
Old 01-18-2020, 07:04   #61969 (permalink)
Insane Poster
 
Join Date: Sep 2008
Location: MX-KEY is the BEST NOKIA TOOL.
Posts: 75
Member: 873350
Status: Offline
Thanks Meter: 36
cherry mobile flare y3 pro frp done


https://imgur.com/LUGe4xx

Last edited by xander_0375; 01-18-2020 at 07:10.
  Reply With Quote
Old 01-18-2020, 07:55   #61970 (permalink)
No Life Poster
 
jjamshad5's Avatar
 
Join Date: Mar 2014
Location: India
Posts: 523
Member: 2156086
Status: Offline
Sonork: 4562
Thanks Meter: 206
Redmi 5 plus frp unlock successfully done..

Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 5F756BFE
ID_BLOCK_L : 1059CAE8545385D8F9F35D089C0E8EC1
ID_BLOCK_L : 3FB9B312A5F49E4C0B9237324DB96558
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!


Brand : xiaomi
ProdName : vince
ProdModel : Redmi 5 Plus
Device : vince
AndroidVer: 7.1.2
Manufact. : Xiaomi
SysPatch : N2G47H
DevComTime: 5/24/2018 7:21:45 PM
QLMxCPU : MSM8953

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00:00:12

Reconnect Power/Cable!

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 5F756BFE
ID_BLOCK_L : 1059CAE8545385D8F9F35D089C0E8EC1
ID_BLOCK_L : 3FB9B312A5F49E4C0B9237324DB96558
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to jjamshad5 For This Useful Post:
Old 01-18-2020, 10:07   #61971 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,265
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,150
Qmobile J7 MT6735 FRP Reset Done With King Infinity CM2


Card found : S/N : A19EC787 , v0138
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6595
BB_CPU_NME : [MediaTek] MT6595_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x8C
NAND Flash : NOT INSTALLED
eMMC Flash : 150100424A4E4234520755D15B7B83AF
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R4BNJ
[eMMC] : FLASH_CID : 150100424A4E4234520755D15B7B83AF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xD9C8F3956C784FF36E2E054C35DD1C0E
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:40
Reconnect Power/Cable!


  Reply With Quote
Old 01-18-2020, 10:11   #61972 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,265
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,150
Qmobile I6i MT6580 FRP Reset Done With King Infinity CM2



Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A32374D42021A93AAD273D1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM72J
[eMMC] : FLASH_CID : 150100464A32374D42021A93AAD273D1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xD9C8F395CAEF5ED042D7A3619325F70A
INT RAM : 0x00020000
EXT RAM : 0x30000000 [768 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:33
Reconnect Power/Cable!


  Reply With Quote
Old 01-18-2020, 11:47   #61973 (permalink)
No Life Poster
 
Join Date: Oct 2009
Location: india
Age: 33
Posts: 2,282
Member: 1146038
Status: Offline
Thanks Meter: 183
ProdModel : LG-K220 format fs and info

Code:
Infinity-Box LG Service Tool [ LGS ] v1.03

Operation : Identify [ v1.03 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ... 
Handshake passed!
Collect info... 

Running : MiniOS 3.0 , ver.1.1 , with proto ver.01000004
HWInfo  : BaseBand : MT6735
HWInfo  : ChargeLv : 50%
HWInfo  : MEM_INFO : QE13MB , MEM_LEN : 0x01D1F000 [eMMC 16 GiB]
DevInfo : Model : LG-K220ds , Type : K22011k
DevInfo : ANDROID 6.0.1
DevInfo :   PSN : CD22S170221003861 , PID : LGK220U84T6LCA
DevInfo : IMEI  : 358939075958733
DevInfo : SecMode : S , Build : U , RCT : 000F4240
SWInfo  : SWver : V11k , SW : LGK220dsAT-00-V10g-AME-XX-FEB-12-2019+0
SWInfo  : FacSW : LGK220dsAT-00-V11k-OPT1-SI-FEB-12-2019+0
RegInfo : Region : COM , Provider : GLOBAL

Prepare passed, mode 0x01
Boot done!


Brand     : lge
ProdName  : mk6p_global_com
ProdModel : LG-K220
Device    : mk6p
AndroidVer: 6.0.1
SWVersion : LGK220AT-00-V11k-GLOBAL-COM-FEB-12-2019+0
Manufact. : LGE
LGMxCPU   : MT6735

Done!
Elapsed: 00:00:10

Code:
Operation : Reset Settings/Format FS [ v1.03 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ... 
Handshake passed!
Collect info... 
Prepare passed, mode 0x01
Boot done!

Format UserData
Format Cache
Format done
Erase FRP#0 block Ok!
Erase FRP#1 block Ok!

Reconnect Power/Cable!

Done!
Elapsed: 00:00:17
  Reply With Quote
Old 01-18-2020, 12:15   #61974 (permalink)
Freak Poster
 
Join Date: Feb 2019
Posts: 223
Member: 2897012
Status: Offline
Sonork: MTK81
Thanks Meter: 191
True smart max 4.5 plus hang on logo solved by cm2

Code:
Chinese Miracle II  [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 146 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x0F
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D002D527B618F13
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x81F00D0F68CB377A7F302E0F880D2D03
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Android
ProdName  : SMART MAX 4.5 PLUS
ProdModel : SMART MAX 4.5 PLUS
Device    : SMART MAX 4.5 PLUS
AndroidVer: 5.1
MTKxCPU   : MT6577
MTKxPRJ   : ALPS.ICS2.MP.V1

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

Finish at : [18/01/2020 / 14:59:52]

Start  at : [18/01/2020 / 14:59:59]
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 146 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x0F
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D002D527B618F13
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x81F00D0F68CB377A7F302E0F880D2D03
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear RDP
Clear Ok!

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

Finish at : [18/01/2020 / 15:00:16]
  Reply With Quote
Old 01-18-2020, 12:21   #61975 (permalink)
Freak Poster
 
Join Date: Feb 2019
Posts: 223
Member: 2897012
Status: Offline
Sonork: MTK81
Thanks Meter: 191
Itel it2150 unlock done

Code:
SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Identify [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] : 35282XXXXXXXXXX
IMEI[2] : 35282XXXXXXXXXX

Done!
Elapsed: 00:00:30

Reconnect Power/Cable!

Operation : Read Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4,00 MiB

Platform Version: MOCOR_16A.W17.09.3_Debug
G185C_it2150_32X32_128X160BAR_EnFrPoArSwHa
Project Version:   it2150-G185C-EnFrPoArSwHa-20170925
MMI Version:       it2150-G185C-EnFrPoArSwHa-20170925
BASE  Version:     BASE_SVN
HW Version:        sc6531efm_bar
09-25-2017 18:54:44
LOG Version:      V1.0.1
Saved to : C:\Users\MTK\Documents\DUMP CM2\MOCOR_16A.W17.09.3_Debug
G185C_it2150_32X32_128X160BAR_EnFrPoArSwHa.bin

Done!
Elapsed: 00:01:39

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_0F95156D8DA0_NVM.nv

Executing FormatFFS ... 
Format FFS Done!

Done!

Last edited by Manikanika81; 01-18-2020 at 12:28.
  Reply With Quote
Old 01-18-2020, 12:26   #61976 (permalink)
Freak Poster
 
Join Date: Feb 2019
Posts: 223
Member: 2897012
Status: Offline
Sonork: MTK81
Thanks Meter: 191
Itel it5615 lock remove done by cm2

Code:
SPRD mode : SC6531 : REV : 0000 : NOR : [ 8MB-16MB]

Operation : Identify [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 653x NOR v1.3(c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [FIDELIX] : FM25Q64 : 0x00800000 [ 8MiB ]

IMEI[1] : 35514XXXXXXXXXX
IMEI[2] : 35514XXXXXXXXXX

Done!
Elapsed: 00:00:33

Reconnect Power/Cable!

Operation : Read Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 653x NOR v1.3(c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [FIDELIX] : FM25Q64 : 0x00800000 [ 8MiB ]

Read Flash Ok, Size : 8,00 MiB

Platform Version: MOCOR_12C.W13.04.14_Debug
G2425_it5615_64X64_240X320BAR_EnFrPoArSwHa
Project Version:   it5615-G2425-EnFrPoArSwHa-20181225
MMI Version:       it5615-G2425-EnFrPoArSwHa-20181225
BASE  Version:     BASE_SVN
HW Version:        fp6531_bar
12-25-2018 17:59:45
LOG Version:      V1.0.1
Saved to : C:\Users\MTK\Documents\DUMP CM2\MOCOR_12C.W13.04.14_Debug
G2425_it5615_64X64_240X320BAR_EnFrPoArSwHa.bin

Done!
Elapsed: 00:02:11

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 653x NOR v1.3(c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [FIDELIX] : FM25Q64 : 0x00800000 [ 8MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00800000_FMT_BACK_0694FC5CA060_NVM.nv

Executing FormatFFS ... 
Format FFS Done!

Done!
Elapsed: 00:00:54
  Reply With Quote
Old 01-18-2020, 12:31   #61977 (permalink)
Insane Poster
 
Join Date: Mar 2017
Location: Zimbabwe
Posts: 61
Member: 2692778
Status: Offline
Thanks Meter: 15
Donate money to this user
ITEL A51 FRP REMOVE

Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : : TRCC not supported!
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to bobohshacks For This Useful Post:
Old 01-18-2020, 14:29   #61978 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,961
Member: 2644066
Status: Offline
Thanks Meter: 929
Qmobile i1000 hang on logo done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : 0000 : NOR : [ 4MB ]

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1E6 6926AF7F7_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!
  Reply With Quote
Old 01-18-2020, 14:31   #61979 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,961
Member: 2644066
Status: Offline
Thanks Meter: 929
Qmobile sp 3000 reset password done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1B7 6916CF3E1_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:25

Reconnect Power/Cable!
  Reply With Quote
Old 01-18-2020, 14:34   #61980 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,961
Member: 2644066
Status: Offline
Thanks Meter: 929
Vgo tel i900 reset password done by cm2


Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : C55A54EB2BFF74F1A753CAE3DA4926F6
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

File_Info : XG05_KM_V2407_VGOTEL_I900_F2_PCB01_gprs_MT6261_S00 .XG05_KM_V2407_VGOTEL_I900_F2_V01_20181107.bin
FileVersion : XG05_KM_V2407_VGOTEL_i900_F2_V01_20181107

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!


Operation : Reset UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : C55A54EB2BFF74F1A753CAE3DA4926F6
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 16:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 08:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 06:32.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.53242 seconds with 9 queries

SEO by vBSEO