Successfully unlocked/repaired phones by Infinity-Box

[Tanha0321]

Brand     : Lenovo
ProdName  : A319
ProdModel : Lenovo A319
Device    : A319
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : A319_ROW_DS_S313_150427

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6572 , Project : huaqin72_cwet_1a_kk , Storage : EMMC
Files found : 11 , Set to Flash : 10
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040503A29D4122B9
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040503A29D4122B9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xD5229C253A7970FBEE20E8A868809E2A
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : huaqin72_cwet_1a_kk , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Disabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : 3728 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x0000000094840000
Flash Pre-Erase Done, time used : 00:00:03

SecCfg Passed , 1799
BMT remark not need. Will skip

Preloader Download skipped by user request! 
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:04:34


Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:53
Reconnect Power/Cable!

[Tanha0321]

Model Name  : sg7067ka
Model Brand : SPRD
Model Device: sp9832a_2h11
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
CompileDate : 8/3/2019 1:30:57 AM
Project Ver : DANY-*******4GXX-20180627-V
Model Ext   : SP9832A

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:36

Reconnect Power/Cable!


Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x000000031E9F7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:01:11

Reconnect Power/Cable!

[Tanha0321]

Brand     : Nokia
ProdName  : Frontier_00WW
ProdModel : Nokia 1
Device    : FRT
AndroidVer: 8.1.0

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer   : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 484A0190613447385119A532931F7D48
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4G8
[eMMC] : FLASH_CID : 90014A483847346132A51951487D3593
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xD5229C2531E3B5F6901971EE9173247B
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:34
Reconnect Power/Cable!

[sandunmuthumala]

i activation infinity best cm2 activation . only working 1.58 mtk

[A.G.Shahid]

Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Identify [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] :
IMEI[2] :

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_146 E9CE685D5_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!

[niaz muhammad]

WIKO__JERRY_ FLASH DON

Card found : CE90936C , v0139
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.04

Load IDBase v1119 Ok!

VER : BP_R1.0.0
LEN : 8D1E86E7
CPU : SC77xx
VER : V2806AN_6.0_WIK_FR_18

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : PAC : rom.pac
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
ProtoEx :  : TRCC not supported!
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : MRA58K
Display ID     : MRA58K release-keys
Ver. Incmt     : 134
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-12-05
Build Time     : 1487865723
Product Board  : v2806
Board Platform : sc8830
Product Info   : v2806
Product Model  : JERRY
Product Brand  : WIKO
Product Name   : v2806
Product Device : v2806
Product Manfct : WIKO

Update DataBase ... 


Platform Version: MOCORTM_14B_7731C_W16.xx.x_Debug
Project Version:   sc7731C_CP0_modem
BASE  Version:    TM_BASE_W16.xx.x
MMI Version:       sc7731C_modem
HW Version:        sc7731C_CP0_modem
CMP_Time : 07-04-2016 13:42:20

MODEM TAG : MOCORTM_14B_7731C_W16.xx.x_Debug_TM_BASE_W16.xx.x_sc7731C_CP0_modem_sc7731C_CP0_modem_sc7731C_modem

UserData : STATE : PLAIN


Done!
Elapsed: 00:01:11

Operation : Read FW [ v2.04 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read FW [ v2.04 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : PAC : rom.pac
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
ProtoEx :  : TRCC not supported!
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : MRA58K
Display ID     : MRA58K release-keys
Ver. Incmt     : 134
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-12-05
Build Time     : 1487865723
Product Board  : v2806
Board Platform : sc8830
Product Info   : v2806
Product Model  : JERRY
Product Brand  : WIKO
Product Name   : v2806
Product Device : v2806
Product Manfct : WIKO

AndroidVer : 6
VlnrLevel : 0x01

SC8830__WIKO__JERRY__6.0__MRA58K__v2806

Read : prodnv.img
ExtSparse : Compression ratio : 21%
Read : phase.cfg
Read : wmodem.bin
Read : wdsp.bin
Read : wnvitem.bin
Read : modem_wcn.img
Read : wcnnvitem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 97%
Make : persist.img
Read : sysinfo.bin
ExtSparse : Compression ratio : 10%
Make : cache.img
Read : recovery.img
Make : userdata.img
Read : u-boot.bin
Read : u-boot-spl.bin

Firmware size : 0x88857250 ( 2.13 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!


Done!
Elapsed: 00:10:39

Open : rom.pac
VER : BP_R1.0.0
LEN : 0x8D1E86E7
CPU : SC77xx
VER : V2806AN_6.0_WIK_FR_18

Reading package ... 
Read package finished!

Patch Level    : MRA58K
Display ID     : MRA58K release-keys
Ver. Incmt     : 151
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-05-05
Build Time     : 1513865869
Product Board  : v2806
Board Platform : sc8830
Product Info   : v2806
Product Model  : JERRY
Product Brand  : WIKO
Product Name   : v2806
Product Device : v2806
Product Manfct : WIKO

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : PAC : rom.pac
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x17
PMTMng : Update PMT Ok!

CODE  : prodnv.img
ERASE : UBOOT
UBOOT : u-boot-spl-16k.bin
CODE  : SC7702_pike_modem_AndroidM.dat
CODE  : DSP_DM_G2.bin
CODE  : SC8800G_pike_wcn_dts_modem.bin
CODE  : boot.img
CODE  : recovery.img
FSIMG  : system.img
FSIMG  : userdata.img
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
ERASE : WRUNTIMENV1
ERASE : WCNRUNTIMENV1
FSIMG  : cache.img
ERASE : MISC
FSIMG  : persist.img
CODE  : sysinfo.img
UBOOT : u-boot.bin
Flashing finished!
Reconnect Power/Cable!


Done!
Elapsed: 00:04:34

[A.G.Shahid]

Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Reset UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : C1254F041E52EF9CE8D8990F47728A3B
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

[mbiborna]

Operation : Flash [ v1.16 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 010CE310
ID_BLOCK_L : 0E4BD8F6464DB3E6EFE14F36AA18E0D7
ID_BLOCK_L : D4205AF93C1F37E7906BA89BE4529EC3
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : BJNB4R
Boot Ok!

Flash Chain : 48
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : adspso.bin
Flashing : sec.dat
Flashing : splash.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : boot.img
Flashing : recovery.img
Flashing : system.img
Flashing : cache.img
Flashing : persist.img
Flashing : misc.img
Flashing : mdtp.img
Flashing : cust.img
Flashing : cmnlib.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : keymaster.mbn
Flashing : userdata.img
Flashing : gpt_backup0.bin
Wipe data ... 

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:02:49

Reconnect Power/Cable!

[starlyn1232]

Selected PCD PH4003 GO and connected keeping vol-

Card found : AA747CDA , v0138
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.03

Load IDBase v10107 Ok!


Operation : Format FS / Reset Settings [ v2.03 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : PCD : PH4003 GO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:46

[Nadeem Waris]

Operation : Reset Privacy Lock [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 44000145313034465E09013665B0C27E
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 6104F
[eMMC] : FLASH_CID : 45010044463430313601095E7EC26365
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0x033C521702BF44B4B4661B8AE9A764A2
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Checking data ...

Process block #1
Process block #2

Privacy Lock reset Ok!

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!

[Nadeem Waris]

Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Reset Settings [ Format FS ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache

Reconnect Power/Cable!


Done!
Elapsed: 00:00:30

[Nadeem Waris]

Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:30

[@ndoy]

SM-B350E PhoneLock

Operation : Read User Code [ v1.25 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ÀA  Boot Ok
CPU ID : 6530 , FDLStat : 00C0
[0] Flash DIE : 00C8 0060 0017 0000
[0] Flash VEN : GigaDevice , GD25LQ64
[0] Flash CAP : 00800000
Check data... Can take some time

User Code : 1234

Done!

Elapsed: 00:00:17

[hafiz4saqib]

Successfully flash Nokia 6300 (RM-217)

[Nadeem Waris]

Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:30