Successfully worked on J100 with Infinity?Share Us - GSM-Forum

meisam · 11-23-2006, 18:23

Anyone successfully used infinity for J100?
i guess lots of guys having the same problem and need a good help from someone who had successful operation on J100 and having enough info about cable and other settings.

zinoubinabil · 11-23-2006, 19:16

hi
if you used the correct cable pinout you will see the result

banz · 11-23-2006, 19:20

hi u can use cruiser cable . It works perfect, i have tested it myself

huzsolt · 11-23-2006, 21:18

I have tested with cruiser cable also, wit 6 pieces. Works OK.

sb323ar · 11-23-2006, 21:28

Tested 15 units with Vygis/Infinity box cable.

maybe · 11-23-2006, 22:06

Hi,
all ok unlocked some Phones.

Br

CHAPRAN · 11-24-2006, 07:24

yes u can use cruiser cable . It works perfect, i have tested 5 nos

imran_qasim · 11-24-2006, 07:36

i've successfully unlocke J100 with Infinity using Cruiser Cable. but i forgott to save the log.

Take Care
ENJOY

tersace · 11-24-2006, 12:56

Works perfect with cruiser cable, Se-tool box cable.

meisam · 11-24-2006, 15:17

You mean no modification is needed? Cause here in tghis forum there's a special pinout for J100 cable.

s1emens · 11-24-2006, 18:39

is there any pinout for j100 cable for infinity, cause when you see at the site, it only show "same like k750 cable".

br,
s1emens

**InfinitySupport** · 11-24-2006, 18:49

TOP
1....12

9: Gnd
10: phone Rx
11: phone Tx

wiliam · 11-24-2006, 20:36

please use universal cable k750 it work perfect tested it work 10000%

ViperGSM · 11-24-2006, 20:51

I made cable,it works just fine...
one tip-when sw says press and hold power button,dont hold it,just press shortly

imran_qasim · 11-25-2006, 11:04

now here is the log i unlock successfully another J100
Thnxxx to Infinity.

COM10 selected
Action: Unlock
Device: SE J100
Checking data, wait...
Connect...
Press and HOLD Power button...
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
921600
Set Baud Done
Check Flash-1...
SW ver: R1E004
HW ver: SEMC_NC2
LP ver: CXC1250396_lp_EU2_R1E004
Flex ver: FFN_NC2_01_FILE
Check Flash-1 Done
Check Flash-2...
In progress...
file saved: Backup_eeprom-1__2006-11-25_12-43-51.80E.bin
Check Flash-2 Done
Write...
Write Done
Finished
Remove/Install battery now !
Time used: 18 sec

Take Care
ENJOY

11-23-2006, 18:23	#1 (permalink)
meisam No Life Poster Join Date: Feb 2005 Location: IRAN(land of heros) Age: 44 Posts: 2,680 Member: 115172 Status: Offline Thanks Meter: 212	Successfully worked on J100 with Infinity?Share Us Anyone successfully used infinity for J100? i guess lots of guys having the same problem and need a good help from someone who had successful operation on J100 and having enough info about cable and other settings.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
*Success Unlocking Alcatel V670 With Infinity *	MED9	Infinity-Box	11	11-16-2009 22:12
Successfully unlock Alcatel-S319X with Infinity	Masud-GSM	Infinity-Box	4	02-08-2009 05:34
Successfully Unlock ZTE 227 With infinity	FayGsmDz	Infinity-Box	3	11-08-2008 08:44
successful unlock sagem 220x with infinity	asco777	Infinity-Box	0	05-02-2008 09:50
((( why i can't connect J100 with infinity )))	Faisal_Computer	Infinity-Box	10	04-30-2007 10:04

11-23-2006, 19:16	#2 (permalink)
zinoubinabil Product Supporter Join Date: Sep 2004 Location: In the right way Posts: 2,748 Member: 84268 Status: Offline Sonork: 100.114149 Thanks Meter: 2,569	hi if you used the correct cable pinout you will see the result

11-23-2006, 19:20	#3 (permalink)
banz Junior Member Join Date: Nov 2004 Age: 49 Posts: 37 Member: 90092 Status: Offline Thanks Meter: 1	hi u can use cruiser cable . It works perfect, i have tested it myself

11-23-2006, 21:18	#4 (permalink)
huzsolt No Life Poster Join Date: Jul 2004 Location: YODAFON Posts: 1,522 Member: 75392 Status: Offline Sonork: 100.81199 Thanks Meter: 136	I have tested with cruiser cable also, wit 6 pieces. Works OK.

11-23-2006, 21:28	#5 (permalink)
sb323ar Freak Poster Join Date: May 2001 Age: 58 Posts: 394 Member: 4434 Status: Offline Thanks Meter: 20	Tested 15 units with Vygis/Infinity box cable.

11-23-2006, 22:06	#6 (permalink)
maybe No Life Poster Join Date: Feb 2004 Location: @Work Posts: 611 Member: 56215 Status: Offline Thanks Meter: 67	Hi, all ok unlocked some Phones. Br

11-24-2006, 07:24	#7 (permalink)
CHAPRAN No Life Poster Join Date: Jun 2003 Location: gods on country(kerala) Posts: 1,769 Member: 31906 Status: Offline Thanks Meter: 101	yes u can use cruiser cable . It works perfect, i have tested 5 nos

11-24-2006, 07:36	#8 (permalink)
imran_qasim No Life Poster Join Date: Apr 2005 Location: PAKISTAN Age: 45 Posts: 1,790 Member: 133436 Status: Offline Sonork: 100.1577364 Thanks Meter: 191	i've successfully unlocke J100 with Infinity using Cruiser Cable. but i forgott to save the log. Take Care ENJOY

11-24-2006, 12:56	#9 (permalink)
tersace Freak Poster Join Date: Nov 2003 Age: 46 Posts: 379 Member: 44483 Status: Offline Thanks Meter: 4	Works perfect with cruiser cable, Se-tool box cable.

11-24-2006, 15:17	#10 (permalink)
meisam No Life Poster Join Date: Feb 2005 Location: IRAN(land of heros) Age: 44 Posts: 2,680 Member: 115172 Status: Offline Thanks Meter: 212	You mean no modification is needed? Cause here in tghis forum there's a special pinout for J100 cable.

11-24-2006, 18:39	#11 (permalink)
s1emens No Life Poster Join Date: Oct 2003 Age: 43 Posts: 1,335 Member: 40602 Status: Offline Thanks Meter: 118	is there any pinout for j100 cable for infinity, cause when you see at the site, it only show "same like k750 cable". br, s1emens

11-24-2006, 18:49	#12 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	TOP 1....12 9: Gnd 10: phone Rx 11: phone Tx

11-24-2006, 20:36	#13 (permalink)
wiliam No Life Poster Join Date: Mar 2006 Posts: 526 Member: 241831 Status: Offline Thanks Meter: 18	please use universal cable k750 it work perfect tested it work 10000%

11-24-2006, 20:51	#14 (permalink)
ViperGSM No Life Poster Join Date: Jan 2004 Location: Serbia Age: 40 Posts: 871 Member: 49634 Status: Offline Sonork: 100.1671023 Thanks Meter: 71	I made cable,it works just fine... one tip-when sw says press and hold power button,dont hold it,just press shortly

11-25-2006, 11:04	#15 (permalink)
imran_qasim No Life Poster Join Date: Apr 2005 Location: PAKISTAN Age: 45 Posts: 1,790 Member: 133436 Status: Offline Sonork: 100.1577364 Thanks Meter: 191	now here is the log i unlock successfully another J100 Thnxxx to Infinity. COM10 selected Action: Unlock Device: SE J100 Checking data, wait... Connect... Press and HOLD Power button... Release Power button ! Connect Done Boot... Boot Done Set Baud... 921600 Set Baud Done Check Flash-1... SW ver: R1E004 HW ver: SEMC_NC2 LP ver: CXC1250396_lp_EU2_R1E004 Flex ver: FFN_NC2_01_FILE Check Flash-1 Done Check Flash-2... In progress... file saved: Backup_eeprom-1__2006-11-25_12-43-51.80E.bin Check Flash-2 Done Write... Write Done Finished Remove/Install battery now ! Time used: 18 sec Take Care ENJOY